<
>
Specifications
Tolerance:
±20%
Power(Watts):
150mW
Number of Turns:
1
Resistance:
10kΩ
Mfr. Part #:
PT10-M-V-103(10K)
Model Number:
PT10-M-V-103(10K)
Key Attributes
Product Description
Product Overview
The PT10-M-V is a general-grade carbon element potentiometer designed for various electronic applications. It offers reliable performance with specifications for electrical characteristics, mechanical features, and durability. This potentiometer is suitable for voltage adjustment in electronic circuits and comes with detailed usage precautions to ensure optimal performance and longevity.
Product Attributes
- Product Name: PT10-M-V
- Type: General grade carbon element potentiometer (single turn)
- Material: Primarily polycarbonate synthetic resin
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| ELECTRICAL CHARACTERISTICS | Total Resistance | __K |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | B taper | |
| Power Rating | 0.15W (Linear/B taper), 0.07W (Other linear) | |
| Max. operating Voltage | 250V DC (Linear/B taper), 125V DC (Other linear) | |
| Residual Resistance | R1-2 10 ; R2-3 10 | |
| Insulation Resistance | 100 M at DC 100 V | |
| MECHANICAL CHARACTERISTICS | Dimensions | Refer to the separate product chart |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 gf.cm | |
| Shaft Stop Strength | 1kgf.cm min | |
| DURABILITY CHARACTERISTICS | Rotational Life | 10,000 cycles (Resistance change within 15%, Rotational Noise 150mV) |
| Working Temperature | -10 ~ + 70 | |
| Storage Temperature | -20 ~ + 80 | |
| Soldering Heat Characteristic | Auto Soldering | 2605 ; time31 sec |
| Manual Soldering | 2805 ; time31 sec | |
| Resistance Effective Stroke | 220 5 | |
| Rotational Noise | 100 mV | |
| Withstanding Voltage | 1 Minute at DC 100 V |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING |
|---|---|
| 100 | 101 |
| 200 | 201 |
| 300 | 301 |
| 500 | 501 |
| 1K | 102 |
| 2K | 202 |
| 3K | 302 |
| 5K | 502 |
| 10K | 103 |
| 20K | 203 |
| 22K | 223 |
| 30K | 303 |
| 47K | 473 |
| 50K | 503 |
| 100K | 104 |
| 200K | 204 |
| 250K | 254 |
| 300K | 304 |
| 500K | 504 |
| 1M | 105 |
| 2M | 205 |
PRECAUTIONS
- Use of chemicals: Avoid contact with ammonia, amines, alkali solution, aromatic hydrocarbon, ketones, esters, and halogenated hydrocarbons.
- Use of flux: Avoid using water-soluble flux during soldering.
- Soldering: Avoid molten solder flowing over the upper surface of PC board to prevent imperfect contacts.
- Circuit Configuration: Recommended for voltage adjustment. If used for current adjustment, confirm under actual operating conditions.
- Residual Resistance: Standard units have a protective anti-sulfurization film. Contact manufacturer for low residual resistance requirements.
- Dew condensation: Avoid use in conditions where dew or water drops may occur to prevent insulation deterioration or shorting.
- Low Temperature Operation: Customized products for comfortable operation at low temperatures are available upon request.
2509111754_BOCHEN-PT10-M-V-103-10K_C5205085.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
