Product Overview
This document outlines the specifications for a standard carbon potentiometer (single-turn). It details electrical, mechanical, and durability characteristics, along with important usage precautions.
Product Attributes
- Product Name: PT15-N-V
- Document Number: RVPT10-03
- Version: 0/0
- Prepared By:
- Reviewed By:
- Approved By:
Technical Specifications
| Item | Specification | Details |
| ELECTRICAL CHARACTERISTICS | Total Resistance | K |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | B taper | |
| Power Rating | Linear (B): 0.15W; Others: 0.07W | |
| Max. operating Voltage | Linear (B): 250V DC; Others: 125V DC | |
| Residual Resistance | R1-2 10 ; R2-3 10 | |
| Insulation Resistance | 100 M at DC 100 V | |
| MECHANICAL CHARACTERISTICS | Dimensions | Refer to the separate product chart |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 gf.cm | |
| DURABILITY CHARACTERISTICS | Rotational Life | 10,000 cycles (Resistance change within 15%, Rotational Noise: 150mV) |
| Working Temperature | -10~ + 70 | |
| Storage Temperature | -20~ + 80 | |
| Soldering Heat Characteristic | Auto Soldering | 2605; 31 sec |
| Manual Soldering | 2805; 31 sec |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | 1M | 105 |
| 2M | 205 |
PRECAUTIONS
Use of chemicals: Avoid contact with ammonia, amines, alkali solutions, aromatic hydrocarbons, ketones, esters, and halogenated hydrocarbons as they may adversely affect the polycarbonate resin used.
Use of flux: Avoid using water-soluble flux during soldering to prevent adverse effects on the potentiometer's materials.
Soldering: Avoid wiring and soldering methods where molten solder flows onto the upper surface of the PC board to prevent imperfect contacts.
Recommended circuit configuration: Recommended for voltage adjustment. If used for current adjustment, confirm performance under actual operating conditions due to potential influence from contact resistance.
Residual Resistance: Standard units have a protective coating over silver electrodes for sulfurization resistance. Contact us for low residual resistance requirements.
Dew condensation: Avoid use in conditions where dew or water drops may form on the resistor surface to prevent reduced insulation or short circuits.
Operation at Low Temperature: For low-temperature environments, customized products with comfortable rotational feel are available upon request.
2512011520_BOCHEN-PT15-N-V-504-500K_C5205111.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
