Product Overview
This document details the specifications for a standard carbon potentiometer (single-turn). It outlines electrical, mechanical, and durability characteristics, along with crucial usage precautions.
Product Attributes
- Product Name: PT15-N-V
- Document Number: RVPT10-03
- Version: 0/0
Technical Specifications
| Item | Content | Specification |
| ELECTRICAL CHARACTERISTICS | Total Resistance | K __ |
| Total Resistance Tolerance | 20% | |
| Resistance Taper | B taper | |
| Power Rating | Linear (B) 0.15W; Others 0.07W | |
| Max. operating Voltage | Linear (B) 250V DC; Others 125V DC | |
| Residual Resistance | R1-2 10 ; R2-3 10 | |
| Insulation Resistance | 100 M at DC 100 V | |
| Effective stroke of resistance | 220 5 | |
| MECHANICAL CHARACTERISTICS | Dimensions | Refer to the separate product chart |
| Total Rotational Angle | 235 10 | |
| Rotational Torque | 10 ~ 150 gf.cm | |
| Shaft Stop Strength | 1kgf.cm min | |
| DURABILITY CHARACTERISTICS | Rotational Life | 10,000 cycles (Resistance change within 15%, Rotational Noise: 150mV) |
| Working Temperature | -10~ + 70 | |
| Storage Temperature | -20~ + 80 | |
| Soldering Heat Characteristic | Auto Soldering | 2605; time31 sec |
| Manual Soldering | 2805; time31 sec |
ABBREVIATION OF NOMINAL TOTAL RESISTANCE
| TOTAL RESISTANCE VALUE | MARKING | TOTAL RESISTANCE VALUE | MARKING |
| 100 | 101 | 20K | 203 |
| 200 | 201 | 22K | 223 |
| 300 | 301 | 30K | 303 |
| 500 | 501 | 47K | 473 |
| 1K | 102 | 50K | 503 |
| 2K | 202 | 100K | 104 |
| 3K | 302 | 200K | 204 |
| 5K | 502 | 250K | 254 |
| 10K | 103 | 300K | 304 |
| 500K | 504 | 1M | 105 |
| 2M | 205 |
PRECAUTIONS
Use of chemicals: Avoid exposing the potentiometer to chemicals such as ammonia, amines, alkali solution, aromatic hydrocarbon, ketones, esters, and halogenous hydrocarbons, as polycarbonate resins are primarily used.
Use of flux: Avoid using water-soluble flux during soldering, as it may adversely affect the molding material and metal components.
Soldering: Avoid wiring designs and soldering methods where molten solder flows over the upper surface of the PC board to prevent imperfect contacts.
Recommended circuit configuration: It is recommended to use variable resistors as voltage adjusting means. If used as current adjusting means, confirm the influence of contact resistance under actual operating conditions.
Residual Resistance: While typically formed by silver printing with a protective coating against sulfurization, contact us for low residual resistance requirements.
Dew condensation: Avoid using the potentiometer where dew or water drops may occur on the surface, as this can lead to insulation deterioration or short circuits.
Operation at Low Temperature: For low-temperature environments (e.g., car radios), customized products for smoother rotary movement are available upon request. Please specify this requirement when ordering.
2512011520_BOCHEN-PT15-N-V-105-1M_C5205112.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
