quality Aluminum Electrolytic Capacitors RS Series including AISHI ERS1HM471G20OT with RoHS compliance and endurance factory

<

>

Specifications

Lifetime:

7000hrs@105℃

Capacitance:

470uF

Height - Seated (Max):

20mm

Voltage Rating:

50V

Pin Spacing:

5mm

Diameter:

10mm

Tolerance:

±20%

Mfr. Part #:

ERS1HM471G20OT

Model Number:

ERS1HM471G20OT

Package:

Through Hole,D10xL20mm

Key Attributes

Product Description

Product Overview

AiSHi offers a range of Aluminum Electrolytic Capacitors designed for high performance and reliability. These capacitors feature low impedance, high ripple current capability, and long life, making them suitable for various industrial applications. The RS series, in particular, is engineered for demanding environments with an endurance of up to 4,000-10,000 hours at +105C. They are RoHS compliant and available in a wide range of voltage and capacitance values.

Product Attributes

Brand: AiSHi
Product Type: Aluminum Electrolytic Capacitors
Series: RS Series
Compliance: RoHS Compliant

Technical Specifications

Part Numbering System:

Category Code	Series Code	Type Code	Size Code	Capacitance Code	Capacitance Tolerance Code	Voltage Code	Terminal Code	Sleeve Marking Code
E (Electrolytic Capacitor)	NR (Conductive Polymer)	G	See Size Code table	See Capacitance Code table	See Tolerance Code table	See Voltage Code table	See Terminal Code table	See Sleeve Marking Code table

RS Series Specifications:

Parameter	Specification
Temperature Range	-40C to +105C
Rated Voltage Range	6.3Vdc to 120Vdc
Capacitance Tolerance	20% (M)
Leakage Current (at 20C)	0.01 CV or 3A, whichever is greater (for Vdc50V)
Dissipation Factor (tan) (at 20C, 120Hz)	See Standard Ratings table
Endurance (@ +105C)	4,000 - 10,000 hours
Shelf Life (at 105C, no load)	Capacitance Change: 20% (30% for 6.3, 10V), DF: 200% of initial, Leakage Current: 200% of initial
Low Temperature Characteristics (Max. Impedance Ratio at -40C/+20C)	See table (e.g., 4 for 6.3Vdc, 8 for 10Vdc)

Standard Ratings (RS Series):

WV (Vdc)	Cap (F)	Size (DL mm)	Impedance (max @ 100kHz)	Rated Ripple Current (mArms @ 105C, 100kHz)
6.3	10	511	1.9	150
6.3	15	511	1.4	180
6.3	22	6.39	0.74	350
6.3	33	6.311	0.55	470
6.3	47	6.315	0.39	620
6.3	68	811.5	0.29	850
6.3	100	815	0.21	1100
6.3	120	816	0.19	1230
10	10	511	1.9	150
10	15	511	1.4	180
10	22	6.39	0.74	350
10	33	6.311	0.55	470
10	47	6.315	0.39	620
10	68	811.5	0.29	850
10	100	815	0.21	1100
10	120	816	0.19	1230
16	4.7	511	3.5	125
16	6.8	511	2.8	150
16	10	6.39	1.2	245
16	15	6.311	0.89	310
16	22	6.315	0.62	410
16	33	811.5	0.44	590
16	47	815	0.33	850
16	68	816	0.26	1035
16	100	1012.5	0.19	1230
16	120	1016	0.17	1450
25	3.3	511	3.5	125
25	4.7	6.39	1.2	245
25	6.8	6.311	0.89	310
25	10	6.315	0.62	410
25	15	811.5	0.44	590
25	22	815	0.33	850
25	33	816	0.26	1035
25	47	1012.5	0.19	1230
25	68	1016	0.17	1450
35	2.2	511	3.5	125
35	3.3	6.39	1.2	245
35	4.7	6.311	0.89	310
35	6.8	6.315	0.62	410
35	10	811.5	0.44	590
35	15	815	0.33	850
35	22	816	0.26	1035
35	33	1012.5	0.19	1230
35	47	1016	0.17	1450
50	1	511	3.5	125
50	2.2	6.39	1.2	245
50	3.3	6.311	0.89	310
50	4.7	6.315	0.62	410
50	6.8	811.5	0.44	590
50	10	815	0.33	850
50	15	816	0.26	1035
50	22	1012.5	0.19	1230
50	33	1016	0.17	1450
63	1	511	3.5	125
63	1.5	6.39	1.2	245
63	2.2	6.311	0.89	310
63	3.3	6.315	0.62	410
63	4.7	811.5	0.44	590
63	6.8	815	0.33	850
63	10	816	0.26	1035
63	15	1012.5	0.19	1230
63	22	1016	0.17	1450
80	1	6.311	0.89	310
80	1.5	6.315	0.62	410
80	2.2	811.5	0.44	590
80	3.3	815	0.33	850
80	4.7	816	0.26	1035
80	6.8	1012.5	0.19	1230
80	10	1016	0.17	1450
100	1	6.315	0.62	410
100	1.5	811.5	0.44	590
100	2.2	815	0.33	850
100	3.3	816	0.26	1035
100	4.7	1012.5	0.19	1230
100	6.8	1016	0.17	1450
120	1	815	0.33	850
120	1.5	816	0.26	1035
120	2.2	1012.5	0.19	1230
120	3.3	1016	0.17	1450

Lead Forming & Taping Specifications:

Code	Figure	Lead Wire Diameter (d)	Pitch of Body (P)	Feed Hole Pitch (PO)	Distance from Hole Center to Lead (P1)	Distance from Feed Hole Center to Body Center (P2)	Lead-to-Lead Distance (F)	Height of Body from Tape Center (H)	Base Tape Width (W)	Adhesive Tape Width (WO)	Hole Position (W1)	Hole Down Tape Position (W2)
C	Fig.1, Fig.2, Fig.3	0.45-0.6 0.05	12.7 1.0	12.7 0.2	3.85-5.1 0.7	6.35 1.0	2.5-5.0 0.5	18.5 0.75	18.0 0.5	6.0-11.0 min	9.0 +0.75/-0.5	3.0 max
F	Fig.4	0.45-0.6 0.05	12.7 1.0	12.7 0.2	3.85 0.7	6.35 1.0	1.5-3.5 0.5	18.5 0.75	18.0 0.5	6.0-8.0 min	9.0 +0.75/-0.5	3.0 max

Soldering Recommendations:

Flow Soldering (Radial Lead Type): Preheating: 13020C (30-90 sec), Cooling: <1 sec, Peak Temp: 260C max, Time: <1 sec.
Reflow Soldering (Polymer SMD Type): Profile includes Preheating (150C to 180C within 90 sec), Peak Temperature (T1), Time above 200C (t), and Time above T.C (t1). Specific durations and temperatures vary by case size.
Reflow Soldering (Liquid SMD Type): Profile includes Preheat (100C to 200C, max 180 sec), Peak Temperature (T.), Time above 200C (t), and Time above T.C (t1). Specific values vary by case size.

2411151515_AISHI-ERS1HM471G20OT_C106666.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

Email*

Phone / WhatsApp

Name

Company Name

Inquiry Message*

Attach Files

Choose Files

You Can Upload Up To 5 Files And Each File Sized 10M Max