<
>
Specifications
Lifetime:
6000hrs@105℃
Capacitance:
100uF
Height - Seated (Max):
12mm
Pin Spacing:
2.5mm
Voltage Rating:
50V
Diameter:
6.3mm
Equivalent Series Resistance(ESR):
-
Tolerance:
±20%
Ripple Current:
-
Mfr. Part #:
ERZ1HM101E12OT
Model Number:
ERZ1HM101E12OT
Package:
Through Hole,D6.3xL12mm
Key Attributes
Product Description
Product Overview
The AISHI RZ series offers miniature single-ended aluminum electrolytic capacitors designed for reliable continuous operation at rated voltage within an ambient temperature range of -40 to +105. These capacitors are manufactured in accordance with JIS-C-5101-1 and JIS-C-5101-4 standards, providing stable performance across various electrical and mechanical tests. They are suitable for applications requiring stable capacitance, low leakage current, and endurance.
Product Attributes
- Brand: AISHI
- Series: RZ
- Sleeve Color: Violet
- Marking Color: White
- RoHS Compliance: Yes, in accordance with the latest EU RoHS standards.
Technical Specifications
| Aishi Part No. | Capacitance (F) | Tolerance on Rated Capacitance (%) | Rated Voltage (VDC) | Surge Voltage (VDC) | Operating Temp. Range () | Max Ripple Current (mArms) at 105 100kHz | Endurance at 105 (Hours) | Impedance () Max at 20, 100kHz | Tan (120Hz) (Max) | Leakage Current (A) (2min.) | Appearance | Drawing No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERZ1HM101E12OT | 100 | -20,+20 | 12 | 16 | -40~+105 | 50 | 6000 | 0.1 | 0.2 | 6 | FIG-1 | CRS-JD-1802125 |
| RZ | 100 | -20,+20 | 12 | 16 | -40~+105 | 50 | 6000 | 0.1 | 0.2 | 6 | FIG-1 | CRS-JD-1802125 |
Product Characteristics - Electrical Characteristics
| Item | Performance | Test Method |
|---|---|---|
| Capacitance | Tolerance: 20% | Frequency: 120Hz (20%) Circuit: Series equivalent circuit Voltage: 0.5Vrms + 1.5~2.0VDC |
| Rated Voltage | See TABLE-1 | Voltage: DC voltage + peak ripple voltage Rated voltage |
| Dissipation Factor DF | See TABLE-1 | Testing conditions same as 5.1.2 for capacitance. |
| Leakage Current | 6.3V~50V: I 0.01CV or 3A, whichever is greater (after 2 min). | Rated voltage applied across capacitor with 1000100 resistor. Measured after 2 min electrification. |
Product Characteristics - Mechanical Performance
| Item | Performance | Test Method |
|---|---|---|
| Terminal Strength (Tensile) | See table for load (N) | Applied load for 101 sec. in axial direction away from body. |
| Terminal Strength (Bending) | See table for load (N) | Apply load, bend body 90, return, bend opposite 90, return. Complete in approx. 5 sec. |
| Resistance to Vibration | No intermittent contacts, open/short circuits, or visible mechanical damage. | 2 hours in 3 orthogonal directions (total 6h). Frequency: 10-55Hz, Amplitude: 1.5mm, Sweep rate: 10-55-10Hz/min. |
| Solderability | At least 90% of circumferential surface of dipping portion covered with new solder. | Complies with JIS-C-5101-1 4.15. Solder temp: 2355, Dipping time: 20.5sec. |
Product Characteristics - Endurance Performance
| Item | Performance | Test Method |
|---|---|---|
| Load Life Test | Capacitance change: 10% of initial value. Dissipation factor: Not more than 200% of TABLE-1 value. Leakage current: Satisfy No. 5.1.4. Appearance: No remarkable abnormality. | Test temp: 1052. Applied rated voltage and rated ripple current. Test time: Refer to TABLE-1 life requirements. |
| Resistance to Damp Heat (Steady State) | Capacitance change: 10% of initial value. Dissipation factor: Not more than TABLE-1 value. Leakage current: Satisfy No. 5.1.4. Appearance: No remarkable abnormality. | Complies with JIS-C-5101-1 4.22. Test temp: 402, Test time: 2408h, Relative humidity: 90-95%. |
| Shelf Life Test | Capacitance change: 25% of initial value (30% for 6.3V, 10V). Dissipation factor: Not more than 200% of TABLE-1 value. Leakage current: Not more than 200% of No. 5.1.4 value. Appearance: No remarkable abnormality. | Stored at 1052 without load for 1000+48-0h, then rested for at least 16 hours. |
| Safety Vent Test | No scattering of leads/foil, no sparks. Vent actuates within 30 min with 1A reverse current. | Applies to products with vent at diameter 8. Reverse DC voltage applied with 1A current. |
Marking
Capacitors are marked with Manufacturers name/trademark, Series (RZ 105), Date code (YyWwPET), Voltage/Capacity, and Polarity.
Part Number System
The part number system includes Category code, Series code, Voltage code, Capacitance tolerance code, Capacitance code, Size code, Terminal code, and Sleeve code.
Lead Forming Type
| PIN code | D | F | L |
|---|---|---|---|
| X | 4~5 | 2.5 | 3.0~12.0 |
| B | 10 | 5.0 | 3.0~12.0 |
| P | 4~8 | 1.5~7.5 | 3.0~12.0 |
| J | 4~18 | 1.5~7.5 | 3.0~12.0 |
| C | 4~18 | Lead cut | N/A |
| F | 4~18 | Lead forming and cut | N/A |
Packing
Available in Taped, Bulk, Inner box, and Outer carton packaging. Labels include Series, P/N, Rated Capacitance, Rated Voltage, Quantity, and Size.
Other Remarks
- Application Notes: Use within rated voltage and ripple current. Avoid reverse polarity. Store in recommended conditions (5-35, <75%RH). Products stored for >12 months may require pre-charging. Discard if stored >3 years.
- Soldering: Avoid halogenated solvents. Ensure proper drying after cleaning. Do not cover sealing area with adhesives.
- PC Board Mounting: Hole pitch must match lead spacing to avoid stress on leads.
- Heat Resistance: Avoid excessive soldering time/temperature to prevent sleeve damage.
- Tensile Strength: Do not bend or handle capacitors after soldering to the PC board.
- Ambient Temperature: Life doubles for every 10 decrease in temperature.
1808281653_AISHI-ERZ1HM101E12OT_C160200.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
