<
>
Specifications
Lifetime:
2000hrs@105℃
Capacitance:
1000uF
Height - Seated (Max):
20mm
Pin Spacing:
5mm
Voltage Rating:
35V
Diameter:
10mm
Tolerance:
±20%
Mfr. Part #:
ERR1VM102G20OT
Model Number:
ERR1VM102G20OT
Package:
Through Hole,D10xL20mm
Key Attributes
Product Description
Product Overview
AiSHi Aluminum Electrolytic Capacitors, specifically the RR series, are designed for high frequency, low impedance, and high reliability applications. These capacitors offer an endurance of 2,000 hours at +105C, making them suitable for demanding applications such as switching power supplies, UPS systems, and general power sources. They are RoHS compliant.
Product Attributes
- Brand: AiSHi
- Series: RR Series
- Type: Miniature Aluminum Electrolytic Capacitors
- Compliance: RoHS Compliant
Technical Specifications
| Category Code | Series Code | Type Code | Size Code | Capacitance Code | Capacitance Tolerance Code | Voltage Code | Sleeve Marking Code | Terminal Code | Rated Voltage (Vdc) | Capacitance (F) | Dimensions (D x L mm) | Max. Leakage Current (A) | Dissipation Factor (tan) at 120Hz | Impedance (m) at 100kHz | Rated Ripple Current (mA/105C, 100kHz) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E | RR | 1H | E | 109/110 | M (20%) | 1H (10V) | C (PVC) / T (PET) | (Various codes for lead forming/taping) | 6.3, 10, 16, 25, 35, 50 | 47 to 10000 | 5.1x11 to 18x20 | (See table below) | (See table below) | (See table below) | (See table below) |
| Standard Ratings (Example Data) | |||||||||||||||
| 6.3 | 150 | 5.1x11 | 250 | 0.22 | 0.3 | 760 | |||||||||
| 6.3 | 330 | 8x12 | 250 | 0.22 | 0.072 | 760 | |||||||||
| 10 | 1500 | 10x20 | 250 | 0.22 | 0.023 | 1820 | |||||||||
| 10 | 3300 | 12.5x25 | 250 | 0.26 | 0.021 | 2360 | |||||||||
| 16 | 1500 | 10x25 | 250 | 0.18 | 0.022 | 2150 | |||||||||
| 16 | 4700 | 12.5x35 | 250 | 0.24 | 0.015 | 3290 | |||||||||
| 25 | 1000 | 10x20 | 250 | 0.12 | 0.023 | 1820 | |||||||||
| 25 | 2200 | 12.5x25 | 250 | 0.14 | 0.018 | 2770 | |||||||||
| 35 | 1000 | 10x20 | 250 | 0.10 | 0.023 | 1820 | |||||||||
| 35 | 2200 | 12.5x25 | 250 | 0.12 | 0.018 | 2770 | |||||||||
| 50 | 1000 | 10x20 | 250 | 0.08 | 0.03 | 3300 | |||||||||
| 50 | 2200 | 12.5x25 | 250 | 0.10 | 0.021 | 2880 | |||||||||
| Endurance Test Conditions: Capacitors are restored to 20C after DC voltage plus rated ripple current applied for 2,000 hours at 105C. | |||||||||||||||
| Endurance Test Results: Capacitance Change: 20% (30% for 6.3, 10V), D.F. (tan): 200% of initial specified value, Leakage Current: initial specified value. | |||||||||||||||
| Shelf Life Test Conditions: Capacitors are restored to 20C after leaving them under no load at 105C for 1,000 hours. | |||||||||||||||
| Shelf Life Test Results: Capacitance Change: 20% (30% for 6.3, 10V), D.F. (tan): 200% of initial specified value, Leakage Current: 200% of initial specified value. | |||||||||||||||
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec.
- Cooling: <1 sec.
- Soldering Temperature: 260C max.
- Soldering Time: <5 sec.
Reflow Soldering (Polymer SMD Type)
- Recommended Reflow Profile: Refer to detailed profile charts in the source document.
- Preheating: 150C to 180C, within 90 sec.
- Peak Temperature: T1 (e.g., 230C - 250C) for t1 (e.g., 30-90 sec).
- Cooling: T2 (e.g., 80C) for t2.
- Soldering Time: T3 (e.g., 50C) for t3.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3 - 10mm: Preheat: 100C to 200C for max. 180 sec. Peak Temperature: 230C - 250C for max. 90 sec. (over 200C for max. 40 sec for 6.3, 30 sec for 8, 30 sec for 10).
- Case size: 12.5 - 18mm: Preheat: 100C to 180C for max. 150 sec. Peak Temperature: 230C - 240C for max. 5 sec. (over 200C for max. 40 sec for 12.5, 30 sec for 15-18).
- Contact manufacturer for conditions outside allowable range.
2304140030_AISHI-ERR1VM102G20OT_C398835.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
