AISHI RS Series Aluminium Electrolytic Capacitors
Product Overview
The AISHI RS Series miniature single-ended aluminium electrolytic capacitors are designed for reliable long-term operation within a wide temperature range of -40 to +105. These capacitors are suitable for applications requiring stable electrical characteristics, including capacitance, dissipation factor, and leakage current. They adhere to JIS-C-5101-1 and JIS-C-5101-4 standards and are built to withstand demanding conditions, offering robust mechanical and endurance performance.
Product Attributes
- Brand: AISHI
- Series: RS
- Sleeve Color: Violet
- Marking Color: White
- Sleeve Material: PET
- RoHS Compliance: Yes
Technical Specifications
| Customer Part No. | Aishi Part No. | Capacitance (F) | Tolerance on Rated Capacitance (%) | Rated Voltage (Vdc) | Surge Voltage (Vdc) | Operating Temp. Range () | Tan (120Hz) (Max) | Leakage Current (A)(2min.) Max | Max Ripple Current (mArms) at 105 100kHz | Impedance ()Max at 20 100kHz | Endurance at 105 (Hours) | Dimensions (mm) D x L | Appearance | Drawing No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CRS-ZD-2005310 | ERS1VM102W20OT | 1000 | -20,+20 | 35 | 44 | -40~+105 | 0.12 | 350 | 2210 | 0.03 | 10000 | 12.5 x 20 | FIG-1 | 1 |
Electrical Characteristics
| Item | Performance |
|---|---|
| Rated voltage | DC voltage + peak ripple voltage Rated voltage |
| Capacitance Tolerance | -20%+20% |
| Leakage Current (after 2 min) | For 6.3V~120V: I0.01CV or 3A, Whichever is greater |
Mechanical Performance
| Item | Performance |
|---|---|
| Terminal Strength (Tensile) | No intermittent contacts, open or short-circuiting, no visible mechanical damage. |
| Terminal Strength (Bending) | No intermittent contacts, open or short-circuiting, no visible mechanical damage. |
| Resistance to Vibration | No intermittent contacts, open or short-circuiting, no visible mechanical damage. |
| Solderability | At least 90% of circumferential surface of the dipping portion of terminal shall be covered with new solder. |
Endurance Performance
| Item | Performance |
|---|---|
| Resistance to Soldering Heat | Capacitance change: Within 10% of initial value. Dissipation factor: Not more than specified value in TABLE-1. Leakage current: To satisfy No. 5.1.4. Appearance: No remarkable abnormality. |
| Resistance to Damp Heat (Steady State) | Capacitance change: Within 10% of initial value. Dissipation factor: Not more than specified value in TABLE-1. Leakage current: To satisfy No. 5.1.4. Appearance: No remarkable abnormality. |
| Load Life Test | Capacitance change: Within 20% of initial value (6.3V, 10V: 30%). Dissipation factor: Not more than 200% of specified value. Leakage current: Not more than specified value. Appearance: No remarkable abnormality. |
| Shelf Life Test | Capacitance change: Within 20% of value before test (6.3V, 10V: 30%). Dissipation factor: Not more than 200% of specified value. Leakage current: Not more than 200% of specified value. Appearance: No remarkable abnormality. |
Marking
Capacitor body markings include: Manufacturers name or trademark, Series - rated temperature (RS 105), Date code-AIHUA code -sleeve material (YyWwPET), Voltage/Capacity (--V--F), and Negative polarity mark.
Part Number System
The part number system includes codes for Category, Series, Voltage, Capacitance Tolerance, Capacitance, Size, Terminal, and Sleeve.
Lead Forming Types
- Taping (PIN Codes: X, B)
- Bulk Packing
- Lead Cut & Lead Forming (PIN Codes: C, F)
- Kink & Cutting (PIN Code: J)
Important Information On The Application Of Aluminium Electrolytic Capacitors
- Always use DC aluminium electrolytic capacitors with correct polarity.
- Use capacitors within their rated voltage.
- Avoid rapid charge and discharge for general-purpose capacitors.
- Storage conditions: Ambient temperature 5~35, humidity 75%RH. Storage life 12 months. Recharge required after 12 months. Discard after 3 years.
- Ensure ripple current is less than the rated value.
- Ambient temperature significantly affects capacitor life; lower temperatures increase lifespan.
- Avoid applying excessive force to lead wires.
- Be mindful of heat resistance during soldering.
- Ensure PC board mounting hole pitch matches product lead spacing.
- Use appropriate cleaning agents and drying procedures after soldering.
- Avoid adhesives, fixatives, or coating materials containing halogenated organic compounds. Do not cover the sealing area.
2411041755_AISHI-ERS1VM102W20OT_C5156477.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
