<
>
Specifications
Lifetime:
7000hrs@105℃
Capacitance:
220uF
Height - Seated (Max):
12mm
Pin Spacing:
3.5mm
Voltage Rating:
35V
Diameter:
8mm
Tolerance:
±20%
Mfr. Part #:
ERS1VM221F12OT
Model Number:
ERS1VM221F12OT
Package:
Through Hole,D8xL12mm
Key Attributes
Product Description
AISHi Aluminum Electrolytic Capacitors - RS Series
Product Overview
The AISHi RS series miniature aluminum electrolytic capacitors are designed for high performance and reliability, offering low impedance, high ripple current capability, and long life. These capacitors are RoHS compliant and suitable for a wide temperature range of -40 to +105C, with rated voltages from 6.3V to 120Vdc. They are ideal for applications requiring stable performance and extended operational lifespan.
Product Attributes
- Brand: AISHi
- Type: Miniature Aluminum Electrolytic Capacitors
- Series: RS
- Compliance: RoHS Compliant
Technical Specifications
General Specifications:
| Specification | Value |
|---|---|
| Temperature Range | -40C to +105C |
| Rated Voltage Range | 6.3Vdc to 120Vdc |
| Capacitance Tolerance | 20% (M) |
| Leakage Current (at 20C, 120Hz) | 0.01 CV or 3A, whichever is greater |
| Dissipation Factor (tan) (at 20C, 120Hz) | See Standard Ratings table |
| Endurance @ +105C | 4,000 - 10,000 hours |
| Shelf Life (at 105C for 1,000 hours) | Capacitance Change: 20% (6.3, 10V: 30%); D.F. (tan): 200% of initial; Leakage Current: 200% of initial |
| Low Temperature Characteristics (Max. Impedance Ratio) | Z(-40C)/Z(+20C): See table; Z(-25C)/Z(+20C): See table |
Standard Ratings:
| WV (Vdc) | Cap (F) | Size (DxL mm) | Impedance (max @ 20C, 100kHz) | Rated Ripple Current (mArms @ 105C, 100kHz) |
|---|---|---|---|---|
| 6.3 | 470 | 8x9 | 0.19 | 740 |
| 6.3 | 680 | 8x11.5 | 0.14 | 850 |
| 6.3 | 1000 | 10x12.5 | 0.14 | 930 |
| 10 | 470 | 8x9 | 0.19 | 740 |
| 10 | 680 | 8x11.5 | 0.14 | 850 |
| 10 | 1000 | 10x12.5 | 0.14 | 930 |
| 16 | 220 | 6.3x11 | 0.22 | 590 |
| 16 | 330 | 8x9 | 0.19 | 740 |
| 16 | 470 | 8x11.5 | 0.14 | 850 |
| 16 | 680 | 10x12.5 | 0.14 | 930 |
| 25 | 100 | 5x11 | 0.74 | 200 |
| 25 | 150 | 6.3x11 | 0.48 | 270 |
| 25 | 220 | 6.3x15 | 0.35 | 310 |
| 25 | 330 | 8x9 | 0.26 | 590 |
| 25 | 470 | 8x11.5 | 0.20 | 680 |
| 25 | 680 | 10x12.5 | 0.16 | 850 |
| 35 | 47 | 5x7 | 1.9 | 125 |
| 35 | 68 | 6.3x9 | 1.4 | 150 |
| 35 | 100 | 6.3x11 | 1.0 | 180 |
| 35 | 150 | 6.3x15 | 0.89 | 210 |
| 35 | 220 | 8x9 | 0.62 | 350 |
| 35 | 330 | 8x11.5 | 0.47 | 410 |
| 35 | 470 | 10x12.5 | 0.35 | 470 |
| 50 | 33 | 6.3x9 | 1.4 | 150 |
| 50 | 47 | 6.3x11 | 1.0 | 180 |
| 50 | 68 | 6.3x15 | 0.74 | 210 |
| 50 | 100 | 8x9 | 0.55 | 350 |
| 50 | 150 | 8x11.5 | 0.37 | 410 |
| 50 | 220 | 10x12.5 | 0.27 | 470 |
| 63 | 22 | 5x11 | 1.3 | 150 |
| 63 | 33 | 6.3x9 | 0.95 | 210 |
| 63 | 47 | 6.3x11 | 0.70 | 245 |
| 63 | 68 | 6.3x15 | 0.50 | 300 |
| 63 | 100 | 8x9 | 0.37 | 350 |
| 63 | 150 | 8x11.5 | 0.25 | 410 |
| 63 | 220 | 10x12.5 | 0.17 | 470 |
| 80 | 10 | 5x7 | 2.8 | 125 |
| 80 | 15 | 5x11 | 1.7 | 150 |
| 80 | 22 | 6.3x9 | 1.2 | 210 |
| 80 | 33 | 6.3x11 | 0.80 | 245 |
| 80 | 47 | 6.3x15 | 0.57 | 300 |
| 80 | 68 | 8x9 | 0.40 | 350 |
| 80 | 100 | 8x11.5 | 0.27 | 410 |
| 80 | 150 | 10x12.5 | 0.17 | 470 |
| 100 | 4.7 | 4x7 | 4.5 | 68 |
| 100 | 6.8 | 5x7 | 3.5 | 80 |
| 100 | 10 | 5x11 | 2.8 | 125 |
| 100 | 15 | 6.3x9 | 1.9 | 150 |
| 100 | 22 | 6.3x11 | 1.4 | 180 |
| 100 | 33 | 6.3x15 | 1.0 | 210 |
| 100 | 47 | 8x9 | 0.70 | 350 |
| 100 | 68 | 8x11.5 | 0.48 | 410 |
| 100 | 100 | 10x12.5 | 0.33 | 470 |
| 120 | 3.3 | 4x7 | 4.5 | 68 |
| 120 | 4.7 | 5x7 | 3.5 | 80 |
| 120 | 6.8 | 5x11 | 2.8 | 125 |
| 120 | 10 | 6.3x9 | 1.9 | 150 |
| 120 | 15 | 6.3x11 | 1.4 | 180 |
| 120 | 22 | 6.3x15 | 1.0 | 210 |
| 120 | 33 | 8x9 | 0.70 | 350 |
| 120 | 47 | 8x11.5 | 0.48 | 410 |
| 120 | 68 | 10x12.5 | 0.33 | 470 |
Lead Forming and Taping Specifications:
| Figure | Code | Description | L (mm) | F (mm) |
|---|---|---|---|---|
| Fig.1 | C | Lead Forming & Cut | 3.0-12.0 | 1.5 |
| Fig.2 | F | Lead Forming & Cut | 3.5, 4.5, 5.0, 7.0 | 5.0 |
| Fig.3 | B | Lead Forming & Cut | 3.0-12.0 | 2.5 |
| Fig.4 | P | Lead Forming & Cut | 3.5, 4.5, 5.0 | 1.5, 2.0, 2.5 |
| J | Lead Forming & Cut | 4.0, 4.5, 5.0 | 5.0 |
Soldering Recommendations:
- Flow Soldering (Radial Lead Type): Preheating: 13020C (30-90 sec). Cooling: <1 sec. Peak Temperature: 260C max.
- Reflow Soldering (Polymer SMD Type): Refer to recommended reflow profile for preheating, peak temperature, and time durations.
- Reflow Soldering (Liquid SMD Type): Specific profiles provided for different case sizes (6.3-10mm and 12.5-18mm) detailing preheat, peak temperature, and duration limits.
Part Numbering System:
Example: CD11GE S G 4 C 5 D 7 T
| Code | Description |
|---|---|
| Category Code (E: Electrolytic Capacitor, S: Conductive Polymer) | |
| Series Code (e.g., CD11GE, CD11GES) | |
| Size Code (e.g., 4, 5, 6.3, 8, 10, 12.5, 16, 18, 20, 25, 30, 35, 40, 46, 50, 60, 80, 100, 115, 120, 130, 140, 160, 200, 220, 238, 250, 315, 350, 380, 400, 420, 450, 500, 550, 600) | |
| Capacitance Code (e.g., 0.10, 0.22, 0.33, 0.47, 0.68, 1.0, 2.2, 3.3, 4.7, 6.8, 10, 22, 33, 47, 68, 100, 220, 330, 470, 680, 1000, 2200, 3300, 4700, 6800, 10000, 22000, 33000, 68000) | |
| Capacitance Tolerance Code (D: 10%, M: 20%, Q: -10%~+30%) | |
| Voltage Code (e.g., 2.5, 4, 6.3, 10, 16, 25, 35, 40, 50, 63, 80, 100, 120, 160, 180, 200, 220, 250, 315, 350, 380, 400, 420, 450, 500, 550, 600) | |
| Terminal Code (e.g., 0: Standard, 1: Taping (SMD Type), 3: Taping F=5.0mm, 4: Lead Cut L=3.5mm, 5: Lead Cut L=11.0mm, A: Lead Forming & Cut L=4.5mm, J: Kink & Cut L=4.5mm) | |
| Sleeve Marking Code (C: PVC, T: PET) | |
| Sleeve Marking Code (e.g., B: Dark Blue, R: Bright Red, S: Sky Blue, L: Light Blue, T: Pink, H: Black, V: Purple-blue) |
2411151515_AISHI-ERS1VM221F12OT_C106697.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
