<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
1000uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
3.5mm
Equivalent Series Resistance(ESR):
12mΩ@100kHz
Height - Seated (Max):
9mm
Operating Temperature:
-55℃~+105℃
Diameter:
8mm
Ripple Current:
4.8A@100kHz
Mfr. Part #:
SPZ0JM102F09C30R
Model Number:
SPZ0JM102F09C30R
Package:
Through Hole,D8xL9mm
Key Attributes
Product Description
Product Overview
The AiSHi PZ series conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low ESR and extended endurance. These RoHS compliant and lead-free components are suitable for system boards, display cards, small chargers, and intelligent TVs. They offer reliable operation with a wide temperature range and various voltage and capacitance ratings.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Certifications: RoHS Compliant, Lead-free
- Sleeve Marking: PVC (Dark Blue), PET (Bright Red, Sky-Blue, Light Blue, Pink, Black, Purple-blue, Red)
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Electrolytic Capacitor |
| Type Code | E | Conductive Polymer |
| Series Code | PZ | PZ Series |
| Temperature Range | -55 to +105C | |
| Rated Working Voltage Range | 6.3 to 100Vdc | |
| Nominal Capacitance Range | 4.7 to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | (after 2 minutes) |
| Dissipation Factor (tan) | See table for values (at 20C, 120Hz) | Max values: 0.08 (6.3V), 0.12 (10V), 0.15 (16V) |
| ESR | See table for values (100 to 300kHz, 20C) | |
| Temperature Characteristics (Impedance Ratio) | Z(+105C)/Z(+20C) 1.25 | (at 100kHz) |
| Z(-55C)/Z(+20C) 1.25 | (at 100kHz) | |
| Endurance | 2,000 hours at +105C | Capacitance Change 20%, D.F. 150% of initial, ESR 150% of initial, Leakage Current initial specified value |
| Humidity Test | 2,000 hours at 60C (90%-95% RH, no voltage) | Meets Endurance characteristics |
| Surge Test | 1,000 cycles (charge/discharge) | Meets Endurance characteristics |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | |
| Soldering - Flow (Radial Lead) | Preheating: 13020C (30-90 sec), Cooling: <1C/sec, Soldering: 260C (max. <1 sec) | |
| Soldering - Reflow (Polymer SMD) | Profile: T1 (Peak Temp), T2 (Temp. over 200C), T3 (Temp. over Tc), t1, t2, t3 | Specific values depend on case size. |
| Soldering - Reflow (Liquid SMD) | Case size <10mm: Preheat 100-200C (max 180s), Peak Temp 230-250C, t 90s, t1 30-40s. Case size 12.5-18mm: Preheat 100-180C (max 150s), Peak Temp 230-235C, t 60s, t1 30s. | Tc and t, values vary by case size. |
Dimensions
| Size Code | Diameter (D) | Length (L) | ESR (m, max) | Ripple Current (mArms, max) | Leakage Current (A, max) |
|---|---|---|---|---|---|
| 4C | 4 | 5.4 | 180 | 110 | 5 |
| 5D | 5 | 5.4 | 130 | 140 | 7 |
| 6.3E | 6.3 | 7.3 | 80 | 200 | 10 |
| 8F | 8 | 9.5 | 60 | 260 | 12 |
| 10G | 10 | 12.5 | 45 | 350 | 15 |
| 12J | 12.5 | 12.5 | 38 | 400 | 18 |
| 16L | 16 | 18.4 | 30 | 500 | 20 |
| 18M | 18 | 18.4 | 28 | 550 | 22 |
| 20N | 20 | 23 | 25 | 600 | 25 |
| 25P | 25 | 29 | 20 | 700 | 30 |
| 35Q | 35 | 41 | 18 | 800 | 35 |
| 40R | 40 | 41 | 16 | 850 | 40 |
| 50S | 50 | 58 | 14 | 950 | 45 |
| 63T | 63 | 73 | 12 | 1100 | 50 |
| 80U | 80 | 92 | 10 | 1200 | 55 |
| 100V | 100 | 115 | 8 | 1300 | 60 |
Part Numbering System
The part number is structured as follows:
Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code
Example: CD11GES G 475 J 100 V A B
| Code | Description |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Series Code | PZ (PZ Series) |
| Size Code | See table for codes and dimensions (e.g., 4C, 5D, 6.3E) |
| Capacitance Code | e.g., 475 = 4.7F, 562 = 5600F |
| Capacitance Tolerance Code | M (20%) |
| Voltage Code | e.g., 100 (100Vdc) |
| Terminal Code | A (Standard), B (Taping), C (Lead Forming & Cut), F (Lead Forming & Cut), J (Kink & Cut) |
| Sleeve Marking Code | See list for colors (e.g., B, R, S, L, T, H, V, K) |
Lead Forming & Taping Specifications
| Figure | Code | Description | Lead Wire Diameter (d) | Pitch of Body (P) | Feed Hole Pitch (PO) | Distance from hole center to lead (P1) | Distance from feed hole center to body center (P2) | Lead-to-lead distance (F) | Height of body from tape center (H) | Base tape width (W) | Adhesive tape width (WO) | Hole position (W1) | Hole down tape position (W2) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fig.1 | B | Taping (SMD Type) F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 2.5-5.0 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-11.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Fig.2 | B | Taping (SMD Type) F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 2.5-5.0 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-11.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Fig.3 | B | Taping (SMD Type) F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 2.5-5.0 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-11.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Fig.4 | P | Taping F=5.0mm | 0.45-0.6 | 12.7 1.0 | 12.7 0.2 | 3.85 0.7 | 6.35 1.0 | 1.5-3.5 0.5 | 18.5 0.75 | 18.0 0.5 | 6.0-8.0 min | 9.0 +0.75/-0.5 | 3.0 max |
| Code:C | Lead Forming & Cut | L=3.0-12.0mm | |||||||||||
| Code:F | Lead Forming & Cut | L=3.5, 4.5, 5.0, 7.0mm | |||||||||||
| Code:J | Kink & Cut | L=4.0, 4.5, 5.0mm |
2409272202_AISHI-SPZ0JM102F09C30R_C106470.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
