AiSHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
The AiSHi PZ series offers conductive polymer aluminum electrolytic capacitors designed for high-performance applications. These capacitors feature low ESR (Equivalent Series Resistance) and are RoHS compliant and lead-free. They are suitable for a wide range of applications including system boards, display cards, small chargers, and intelligent TVs.
Product Attributes
- Brand: AiSHi
- Series: PZ Series
- Type: Conductive Polymer Aluminum Electrolytic Capacitors
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Type Code | S (Conductive Polymer) |
| Endurance | +105C, 2,000 hours |
| Temperature Range | -55C to +105C |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc |
| Nominal Capacitance Range | 4.7F to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) |
| Dissipation Factor (tan) | See table for specific values (at 20C, 120Hz) |
| ESR | See table for specific values (100kHz-300kHz, 20C) |
| Temperature Characteristics (Impedance Ratio) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 |
| Endurance Requirements (after 2,000 hours at 105C) | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value |
| Humidity Test Requirements (after 2,000 hours at 60C, 90%-95% RH, no voltage) | Meets Endurance characteristics |
| Surge Test Requirements (after 1,000 cycles) | Appearance: No significant damage Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value |
Standard Ratings Table (Partial)
| VDC (SV) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 4x5.7 | 150 | 170 | 44 |
| 6.3 (7.2) | 270 | 5x7.5 | 120 | 210 | 48 |
| 6.3 (7.2) | 330 | 5x7.5 | 100 | 230 | 53 |
| 6.3 (7.2) | 390 | 6.3x7.7 | 90 | 270 | 57 |
| 6.3 (7.2) | 470 | 6.3x9.5 | 80 | 300 | 62 |
| 10 (11.5) | 470 | 6.3x9.5 | 80 | 300 | 62 |
| 16 (18.4) | 470 | 8x12.5 | 60 | 400 | 74 |
| 25 (29) | 470 | 8x12.5 | 60 | 400 | 74 |
| 35 (41) | 470 | 10x12.5 | 50 | 480 | 83 |
| 50 (58) | 470 | 10x15.5 | 50 | 480 | 83 |
| 63 (73) | 470 | 12.5x15.5 | 40 | 580 | 93 |
| 100 (115) | 470 | 12.5x20.5 | 40 | 580 | 93 |
Part Numbering System
The part numbering system follows a structured format: Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code.
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec.
- Cooling: Approx. 200C/sec. (max.)
- Soldering Temperature: 260C, <1 sec.
Reflow Soldering (For Polymer SMD Type)
Recommended Reflow Profile specifications are provided in the original document, including preheating, peak temperature (T1, T2, T3), and time durations (t1, t2, t3).
Reflow Soldering (For Liquid SMD Type)
Specific reflow profiles are detailed for case sizes 6.3-10mm and 12.5-18mm, including preheat temperature and duration, peak temperature, and duration over 200C and T.C. Contact AiSHi for conditions outside the allowable range.
2409272202_AISHI-SPZ0JM271D08C30R_C106474.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
