<
>
Specifications
Voltage Rating:
10V
Capacitance:
560uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
3.5mm
Height - Seated (Max):
9mm
Equivalent Series Resistance(ESR):
15mΩ@100kHz
Operating Temperature:
-55℃~+105℃
Diameter:
8mm
Ripple Current:
3.6A@100kHz
Mfr. Part #:
SPZ1AM561F09O00R
Model Number:
SPZ1AM561F09O00R
Package:
Through Hole,D8xL9mm
Key Attributes
Product Description
Product Overview
AiSHi PZ series conductive polymer aluminum electrolytic capacitors are designed for high-reliability applications. These capacitors offer low ESR and are compliant with RoHS and lead-free standards. They are suitable for use in system boards, display cards, small chargers, and intelligent TVs, providing stable performance over a wide temperature range.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Material: Conductive Polymer Aluminum Electrolytic
- Certifications: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details | |||
|---|---|---|---|---|---|
| Category Code | E | Electrolytic Capacitor | |||
| Type Code | PZ | Conductive Polymer | |||
| Temperature Range | -55 to +105C | ||||
| Rated Voltage Range | 6.3 to 100Vdc | ||||
| Nominal Capacitance Range | 4.7 to 5600F | ||||
| Capacitance Tolerance | 20% (M) | ||||
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | (after 2 minutes) | |||
| Dissipation Factor (tan) | See table for values (at 20C, 120Hz) | ||||
| ESR | See table for values (100-300kHz, 20C) | ||||
| Temperature Characteristics (Impedance Ratio) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 | (at 100kHz) | |||
| Endurance | 2,000 hours at +105C | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | |||
| Humidity Test | 90%-95% RH for 2,000 hours at 60C (without voltage) | Meets Endurance characteristics | |||
| Surge Test | 1,000 cycles | Appearance: No significant damage Capacitance Change: 20% of initial value D.F. (tan): 50% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | |||
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | ||||
| Part Numbering System Example | [Category Code][Series Code][Size Code][Capacitance Code][Capacitance Tolerance Code][Voltage Code][Terminal Code][Sleeve Marking Code] | e.g., CD11GE G E (This is an example, specific codes may vary) | |||
| Dimensions | See Standard Ratings tables for DxL (mm) | ||||
| Standard Ratings (Example: 6.3Vdc) | Cap (F) | Size DxL (mm) | ESR (m, 20C, 100kHz) (max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A) (max.) |
| 220 | 6.3x7.2 | 150 | 100 | 50 | |
| 270 | 6.3x7.8 | 130 | 120 | 60 | |
| 330 | 7x8 | 110 | 140 | 65 | |
| 390 | 7.5x8.6 | 100 | 160 | 70 | |
| 470 | 8x9 | 90 | 180 | 80 | |
| 560 | 8x11.5 | 80 | 200 | 85 | |
| 680 | 10x12 | 70 | 220 | 90 | |
| 820 | 10x13.8 | 65 | 230 | 100 | |
| 1000 | 10x16 | 60 | 250 | 110 | |
| 1200 | 10x20 | 55 | 270 | 120 | |
| 1500 | 12.5x16 | 50 | 290 | 130 | |
| 1800 | 12.5x20 | 45 | 310 | 140 | |
| 2200 | 16x18.4 | 40 | 330 | 150 | |
| 2700 | 16x25 | 35 | 350 | 160 | |
| 3300 | 18x20 | 30 | 370 | 170 | |
| 3900 | 18x25 | 28 | 390 | 180 | |
| 4700 | 20x23 | 25 | 410 | 190 | |
| 5600 | 20x25 | 23 | 430 | 200 | |
| Soldering Recommendation | Flow Soldering (Radial Lead Type) | Preheating: 13020C (30-90 sec) Cooling: <1 sec Peak Temp: 260C max. (1 sec max.) | |||
| Reflow Soldering (Polymer SMD Type) | Refer to recommended reflow profile (Preheating, Peak Temp, Time) | ||||
| Reflow Soldering (Liquid SMD Type) | Case size < 10mm: Preheat 100-200C (max. 180 sec), Peak Temp 230-250C (max. 90 sec), T.C. max. 40 sec. Case size 12.5-18mm: Preheat 100-180C (max. 150 sec), Peak Temp 230C (max. 60 sec), T.C. max. 30 sec. |
2409272202_AISHI-SPZ1AM561F09O00R_C106487.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
