<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
1800uF
Lifetime:
-
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
-
Ripple Current:
-
Diameter:
-
Mfr. Part #:
SPZ0JM182G12O00RAXXX
Model Number:
SPZ0JM182G12O00RAXXX
Package:
Through Hole,D10xL12mm
Key Attributes
Product Description
AiSHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
The AiSHi PZ series offers conductive polymer aluminum electrolytic capacitors designed for high-performance applications. These capacitors feature low ESR (Equivalent Series Resistance) and are RoHS compliant and lead-free. They are recommended for use in system boards, display cards, small chargers, and intelligent TVs, providing reliable and efficient power solutions.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details | |||
|---|---|---|---|---|---|
| Category Code | E | Conductive Polymer Electrolytic Capacitor | |||
| Series Code | PZ | PZ Series | |||
| Temperature Range | -55 to +105C | ||||
| Rated Voltage Range | 6.3 - 100Vdc | ||||
| Nominal Capacitance Range | 4.7 - 5600F | ||||
| Capacitance Tolerance | 20% (M) | ||||
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | (After 2 minutes at 20C) | |||
| Dissipation Factor (tan) | See table below (at 20C, 120Hz) | ||||
| ESR | See table below (100kHz-300kHz, 20C) | ||||
| Temperature Characteristics (Impedance Ratio) | Z(+105C)/Z(+20C) 1.25 | (at 100kHz) | |||
| Z(-55C)/Z(+20C) 1.25 | (at 100kHz) | ||||
| Endurance | 2,000 hours at +105C | After application of rated voltage for 2,000 hours at 105C, capacitors shall meet: Capacitance Change 20% of initial value, D.F. (tan) 150% of initial specified value, ESR 150% of initial specified value, Leakage Current initial specified value. | |||
| Humidity Test | 2,000 hours at 60C, 90%-95% RH (without voltage) | Capacitors shall meet Endurance characteristics. | |||
| Surge Test | 1,000 cycles (charge 30 sec with surge voltage, discharge 5 min 30 sec) | Capacitors shall meet: Capacitance Change 20% of initial value, D.F. (tan) 50% of initial specified value, ESR 150% of initial specified value, Leakage Current initial specified value. | |||
| Dissipation Factor (tan) @ 20C, 120Hz | |||||
| Rated Voltage (Vdc) | 6.3, 6.8, 7.5, 10, 16, 25, 35, 50, 63, 100 | tan (max.): 0.08, 0.12, 0.15 | |||
| Standard Ratings (Examples) | |||||
| VDC (SV) | Cap (F) | Size (DxL mm) | ESR (m, 20C, 100kHz) (max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A) (max.) |
| 6.3 (7.2) | 220, 270, 330, 390, 470, 560, 680 | 4x5 to 10x12.5 | See table | See table | See table |
| 7.5 (8.6) | 470, 680, 820, 470 | 6.3x9 to 10x12.5 | See table | See table | See table |
| 10 (11.5) | 470, 680, 820 | 6.3x9 to 10x12.5 | See table | See table | See table |
| 12 (13.8) | 470, 680, 820 | 6.3x9 to 10x12.5 | See table | See table | See table |
| 16 (18.4) | 220, 330, 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 4x5 to 18x21 | See table | See table | See table |
| 20 (23) | 330, 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 5x7 to 18x21 | See table | See table | See table |
| 25 (29) | 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 6.3x9 to 18x21 | See table | See table | See table |
| 35 (41) | 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 6.3x9 to 18x21 | See table | See table | See table |
| 50 (58) | 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 8x11 to 18x21 | See table | See table | See table |
| 63 (73) | 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 8x11 to 18x21 | See table | See table | See table |
| 80 (92) | 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 10x12.5 to 18x21 | See table | See table | See table |
| 100 (115) | 470, 680, 820, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600 | 10x12.5 to 18x21 | See table | See table | See table |
Part Numbering System
The part numbering system follows a structured format: Category Code, Series Code, Size Code, Capacitance Code, Capacitance Tolerance Code, Voltage Code, Terminal Code, Sleeve Marking Code.
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec.
- Cooling: (1-3C)/sec. (Note 1)
- Soldering: Approx. 260C, <1 sec. (Note 2)
- Cooling: Approx. 200C/sec. (Note 3)
Reflow Soldering (Polymer SMD Type)
- Recommended Reflow Profile: T1 (Peak temp), T2 (Temp. over 200C), T3 (Temp. over T.C.), t1 (time over 200C), t2 (time over T.C.), t3 (preheating time).
- Preheating: 150C to 180C, Within 90 sec.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3 - 10mm: Preheat 100C to 200C (Max 180 sec). Peak temp 230-250C (Max 5 sec). Duration over 200C 40-90 sec. Duration over T.C. 30 sec.
- Case size: 12.5 - 18mm: Preheat 100C to 180C (Max 150 sec). Peak temp 230-235C (Max 5 sec). Duration over 200C 30-60 sec. Duration over T.C. 30 sec.
Lead Forming Specifications
Various lead forming codes (X, B, P, C, F, J) are available with specific dimensions and tolerances for lead wire diameter, pitch, distance, and height.
2409272202_AISHI-SPZ0JM182G12O00RAXXX_C2691853.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
