<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
470uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
2.5mm
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
9mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
6.3mm
Mfr. Part #:
SPZ0JM471E09C30R
Model Number:
SPZ0JM471E09C30R
Package:
Through Hole,D6.3xL9mm
Key Attributes
Product Description
AiSHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
Product Overview
The AiSHi PZ series of conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low Equivalent Series Resistance (ESR) and long endurance. These RoHS compliant and lead-free capacitors are suitable for demanding applications such as system boards, display cards, small chargers, and intelligent TVs. They offer reliable performance with a wide operating temperature range and robust construction.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
Part Numbering System
The part numbering system follows a structured format: Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code
General Specifications
| Item | Specification |
|---|---|
| Category Code | E (Electrolytic Capacitor), S (Conductive Polymer) |
| Endurance | +105C, 2,000 hours |
| Low ESR | Yes |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
| Temperature Range | -55C to +105C |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc |
| Nominal Capacitance Range | 4.7F to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current (at 20C, 120Hz) | 0.2CV or 500A, whichever is greater (Where C: Nominal capacitance (F), V: Rated voltage (V)) |
| Dissipation Factor (tan) (at 20C, 120Hz) | See Standard Ratings table |
| ESR (100kHz-300kHz, 20C) | See Standard Ratings table |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 |
| Appearance (Endurance) | No significant damage |
| Capacitance Change (Endurance) | 20% of the initial value |
| D.F. (tan) (Endurance) | 150% of the initial specified value |
| ESR (Endurance) | 150% of the initial specified value |
| Leakage Current (Endurance) | The initial specified value |
| Humidity Test | Meets Endurance characteristics after 2,000 hours at 60C, 90%-95% RH (no voltage applied) |
| Surge Test | Meets requirements after 1,000 cycles (charge/discharge) |
| Appearance (Surge Test) | No significant damage |
| Capacitance Change (Surge Test) | 20% of the initial value |
| D.F. (tan) (Surge Test) | 150% of the initial specified value |
| ESR (Surge Test) | 150% of the initial specified value |
| Leakage Current (Surge Test) | The initial specified value |
Standard Ratings (Partial)
| VDC (V) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 80 | 300 | 4.4 |
| 6.3 (7.2) | 270 | 6.3x7.2 | 65 | 300 | 4.9 |
| 6.3 (7.2) | 330 | 6.3x7.2 | 55 | 300 | 5.4 |
| 6.3 (7.2) | 390 | 6.3x7.2 | 45 | 300 | 5.9 |
| 6.3 (7.2) | 470 | 6.3x7.2 | 40 | 300 | 6.3 |
| 6.3 (7.2) | 560 | 6.3x7.2 | 35 | 300 | 6.8 |
| 6.3 (7.2) | 680 | 6.3x7.2 | 30 | 300 | 7.3 |
| 10 (11.5) | 470 | 10x12.5 | 30 | 600 | 4.7 |
| 10 (11.5) | 680 | 10x12.5 | 25 | 600 | 5.9 |
| 10 (11.5) | 820 | 10x12.5 | 20 | 600 | 6.6 |
| 12.5 (14.3) | 470 | 10x12.5 | 30 | 600 | 4.7 |
| 12.5 (14.3) | 680 | 10x12.5 | 25 | 600 | 5.9 |
| 12.5 (14.3) | 820 | 10x12.5 | 20 | 600 | 6.6 |
| 16 (18.4) | 220 | 6.3x7.2 | 80 | 300 | 4.4 |
| 16 (18.4) | 330 | 6.3x7.2 | 55 | 300 | 5.4 |
| 16 (18.4) | 470 | 6.3x7.2 | 40 | 300 | 6.3 |
| 16 (18.4) | 680 | 6.3x7.2 | 30 | 300 | 7.3 |
| 16 (18.4) | 1000 | 8x12 | 25 | 450 | 7.1 |
| 16 (18.4) | 1500 | 10x12.5 | 20 | 600 | 8.7 |
| 16 (18.4) | 2200 | 10x15.5 | 15 | 700 | 10.3 |
| 16 (18.4) | 3300 | 12.5x15.5 | 12 | 800 | 12.7 |
| 16 (18.4) | 4700 | 12.5x20 | 10 | 900 | 15.1 |
| 20 (23) | 330 | 6.3x7.2 | 55 | 300 | 5.4 |
| 20 (23) | 470 | 6.3x7.2 | 40 | 300 | 6.3 |
| 20 (23) | 680 | 6.3x7.2 | 30 | 300 | 7.3 |
| 20 (23) | 1000 | 8x12 | 25 | 450 | 7.1 |
| 20 (23) | 1500 | 10x12.5 | 20 | 600 | 8.7 |
| 20 (23) | 2200 | 10x15.5 | 15 | 700 | 10.3 |
| 20 (23) | 3300 | 12.5x15.5 | 12 | 800 | 12.7 |
| 20 (23) | 4700 | 12.5x20 | 10 | 900 | 15.1 |
| 25 (29) | 1000 | 8x12 | 25 | 450 | 7.1 |
| 25 (29) | 1500 | 10x12.5 | 20 | 600 | 8.7 |
| 25 (29) | 2200 | 10x15.5 | 15 | 700 | 10.3 |
| 25 (29) | 3300 | 12.5x15.5 | 12 | 800 | 12.7 |
| 25 (29) | 4700 | 12.5x20 | 10 | 900 | 15.1 |
| 35 (41) | 1000 | 8x12 | 25 | 450 | 7.1 |
| 35 (41) | 1500 | 10x12.5 | 20 | 600 | 8.7 |
| 35 (41) | 2200 | 10x15.5 | 15 | 700 | 10.3 |
| 35 (41) | 3300 | 12.5x15.5 | 12 | 800 | 12.7 |
| 35 (41) | 4700 | 12.5x20 | 10 | 900 | 15.1 |
| 50 (58) | 2200 | 10x15.5 | 15 | 700 | 10.3 |
| 50 (58) | 3300 | 12.5x15.5 | 12 | 800 | 12.7 |
| 50 (58) | 4700 | 12.5x20 | 10 | 900 | 15.1 |
| 50 (58) | 6800 | 16x20 | 8 | 1000 | 17.0 |
| 50 (58) | 8200 | 18x20 | 7 | 1100 | 18.4 |
| 63 (73) | 3300 | 12.5x15.5 | 12 | 800 | 12.7 |
| 63 (73) | 4700 | 12.5x20 | 10 | 900 | 15.1 |
| 63 (73) | 6800 | 16x20 | 8 | 1000 | 17.0 |
| 63 (73) | 8200 | 18x20 | 7 | 1100 | 18.4 |
| 63 (73) | 10000 | 18x25 | 6 | 1200 | 20.0 |
| 80 (92) | 4700 | 12.5x20 | 10 | 900 | 15.1 |
| 80 (92) | 6800 | 16x20 | 8 | 1000 | 17.0 |
| 80 (92) | 8200 | 18x20 | 7 | 1100 | 18.4 |
| 80 (92) | 10000 | 18x25 | 6 | 1200 | 20.0 |
| 100 (115) | 6800 | 16x20 | 8 | 1000 | 17.0 |
| 100 (115) | 8200 | 18x20 | 7 | 1100 | 18.4 |
| 100 (115) | 10000 | 18x25 | 6 | 1200 | 20.0 |
Soldering Recommendations
- Flow Soldering (Radial Lead Type): Preheating 13020C (1-3C/sec), Cooling Approx. 200C/sec. Tamb 30-90 sec. <1 sec.
- Reflow Soldering (Polymer SMD Type): Refer to recommended reflow profile (includes preheating, peak temperature, and time parameters).
- Reflow Soldering (Liquid SMD Type): Specifications vary by case size (6.3-10mm and 12.5-18mm), with defined preheat, peak temperature, and duration limits.
Dimensions (mm)
Dimensions are provided in the Standard Ratings table.
Specifications subject to change without notice.
2409272202_AISHI-SPZ0JM471E09C30R_C106479.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
