<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
1200uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
3.5mm
Equivalent Series Resistance(ESR):
10mΩ@100kHz
Height - Seated (Max):
11mm
Operating Temperature:
-55℃~+105℃
Diameter:
8mm
Ripple Current:
5.3A@100kHz
Mfr. Part #:
SPZ0JM122F11O00RAXXX
Model Number:
SPZ0JM122F11O00RAXXX
Package:
Through Hole,D8xL11mm
Key Attributes
Product Description
AISHi Conductive Polymer Electrolytic Capacitors - PZ Series
The AISHi PZ series conductive polymer electrolytic capacitors are designed for high-performance applications requiring low Equivalent Series Resistance (ESR) and reliable endurance. These RoHS compliant and lead-free components are ideal for system boards, display cards, small chargers, and intelligent TVs, offering a robust solution for modern electronic designs.
Product Attributes
- Brand: AISHi
- Series: PZ
- Material: Conductive Polymer
- Certifications: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Conductive Polymer Electrolytic Capacitor |
| Endurance | +105C 2,000 hours | |
| Low ESR | ||
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | |
| Temperature Range | -55C to +105C | |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc | |
| Nominal Capacitance Range | 4.7F to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, after 2 minutes) | Where C=Nominal Capacitance (F), V=Rated Voltage (V) |
| Dissipation Factor (tan) | See table below (at 20C, 120Hz) | |
| ESR (100kHz-300kHz, 20C) | See table below (max.) | |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 | |
| Z(-55C)/Z(+20C) 1.25 | ||
| Endurance Test Requirements | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | (After 2,000 hours at 105C with rated voltage) |
| Humidity Test Requirements | Meet Endurance characteristics | (After 2,000 hours at 60C, 90%-95% RH without voltage) |
| Surge Test Requirements | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | (After 1,000 cycles of surge voltage application) |
Standard Ratings Table (Partial)
| VDC (SV) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 23 | 1110 | 4.4 |
| 6.3 (7.2) | 270 | 6.3x7.2 | 19 | 1280 | 5.4 |
| 6.3 (7.2) | 330 | 6.3x7.2 | 16 | 1430 | 6.6 |
| 6.3 (7.2) | 390 | 6.3x7.2 | 14 | 1570 | 7.8 |
| 6.3 (7.2) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 6.3 (7.2) | 560 | 6.3x7.2 | 10 | 1870 | 11.2 |
| 6.3 (7.2) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 7.5 (8.6) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 7.5 (8.6) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 7.5 (8.6) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 10 (11.5) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 10 (11.5) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 10 (11.5) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 10 (11.5) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 12 (13.8) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 12 (13.8) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 12 (13.8) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 12 (13.8) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 12 (13.8) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 16 (18.4) | 470 | 6.3x7.2 | 12 | 1700 | 9.4 |
| 16 (18.4) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 16 (18.4) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 16 (18.4) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 16 (18.4) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 16 (18.4) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 16 (18.4) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 20 (23) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 20 (23) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 20 (23) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 20 (23) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 20 (23) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 20 (23) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 20 (23) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 25 (29) | 680 | 6.3x7.2 | 8.5 | 2040 | 13.6 |
| 25 (29) | 820 | 8x9.5 | 7.2 | 2300 | 16.4 |
| 25 (29) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 25 (29) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 25 (29) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 25 (29) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 25 (29) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 25 (29) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 35 (41) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 35 (41) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 35 (41) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 35 (41) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 35 (41) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 35 (41) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 35 (41) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 35 (41) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 50 (58) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 50 (58) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 50 (58) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 50 (58) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 50 (58) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 50 (58) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 50 (58) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 50 (58) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 50 (58) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
| 50 (58) | 5600 | 18x20 | 1.6 | 4800 | 112.0 |
| 63 (73) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 63 (73) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 63 (73) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 63 (73) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 63 (73) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 63 (73) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 63 (73) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 63 (73) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 63 (73) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
| 63 (73) | 5600 | 18x20 | 1.6 | 4800 | 112.0 |
| 80 (92) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 80 (92) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 80 (92) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 80 (92) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 80 (92) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 80 (92) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 80 (92) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 80 (92) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 80 (92) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
| 100 (115) | 1000 | 8x9.5 | 6.0 | 2500 | 20.0 |
| 100 (115) | 1200 | 10x12 | 5.0 | 2700 | 24.0 |
| 100 (115) | 1500 | 10x12 | 4.0 | 3000 | 30.0 |
| 100 (115) | 1800 | 10x12 | 3.5 | 3200 | 36.0 |
| 100 (115) | 2200 | 12.5x13.8 | 3.0 | 3500 | 44.0 |
| 100 (115) | 2700 | 12.5x13.8 | 2.5 | 3700 | 54.0 |
| 100 (115) | 3300 | 12.5x13.8 | 2.2 | 3900 | 66.0 |
| 100 (115) | 3900 | 16x18.4 | 2.0 | 4200 | 78.0 |
| 100 (115) | 4700 | 16x18.4 | 1.8 | 4500 | 94.0 |
Part Numbering System
The part numbering system follows the format: Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code
| Position | Code | Description |
|---|---|---|
| 1 | E | Electrolytic Capacitor |
| 2 | G | Conductive Polymer |
| 3 | CD11GE, CD11GES, CD11GAS, CD11GHS | Series Name |
| 4 | (See table) | Size Code (Diameter x Length in mm) |
| 5 | (See table) | Capacitance Code (F) |
| 6 | (See table) | Capacitance Tolerance Code (%) |
| 7 | (See table) | Voltage Code (Vdc) |
| 8 | (See table) | Terminal Code |
| 9 | (See table) | Sleeve Marking Code |
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 130 20C, 30-90 sec.
- Cooling: (1-3 C)/sec. (Note 1)
- Soldering Temperature: Approx. 260C, < 1 sec.
- Note 1: Cooling rate.
Reflow Soldering (Polymer SMD Type)
- Recommended Reflow Profile: See diagram.
- Preheating: 150C to 180C, Within 90 sec.
- Peak Temperature (T1): Max 260C (for case size <10mm), Max 250C (for case size 10mm)
- Time above 200C (t1): Max 40 sec. (for case size C6.3), Max 30 sec. (for case size C8, 10)
- Time above T.C (t): Max 90 sec.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3 - 10mm:
Preheat: 100C to 200C, Max 180 seconds.
Peak Temperature (T.): Max 230C.
Duration over 200C (t): Max 90 sec.
Duration over T.C (t,): Max 40 sec. - Case size: 12.5 - 18mm:
Preheat: 100C to 180C, Max 150 seconds.
Peak Temperature (T.): Max 230C.
Duration over 200C (t): Max 60 sec.
Duration over T.C (t,): Max 30 sec.
Lead Forming and Taping Specifications
Various lead forming and taping options are available, including standard taping, lead cut, lead forming & cut, and kink options, with specific dimensions and configurations detailed in the provided figures and tables.
Dimensions (mm)
| Item | Symbol | Specification |
|---|---|---|
| Lead Forming & Cut | Code: C | Range: 4-18 |
| Code: F | Range: 4-18, L: 3.5, 4.5, 5.0, 7.0mm | |
| Lead Forming & Cut | Code: J | Range: 10-18, L: 4.0, 4.5, 5.0mm |
Specifications are subject to change without notice.
2409272202_AISHI-SPZ0JM122F11O00RAXXX_C475960.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
