AISHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
The AISHi PZ series of conductive polymer aluminum electrolytic capacitors are designed for demanding applications requiring high reliability and performance. These capacitors offer low ESR (Equivalent Series Resistance) and are compliant with RoHS and lead-free standards. They are ideal for use in system boards, display cards, small chargers, and intelligent TVs.
- Brand: AISHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant and Lead-free
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Conductive Polymer Electrolytic Capacitor |
| Temperature Range | -55 to +105C | |
| Rated Working Voltage Range | 6.3 to 100Vdc | |
| Nominal Capacitance Range | 4.7 to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | Where C: Nominal capacitance (F), V: Rated voltage (V) |
| Dissipation Factor (tan) | See table below (at 20C, 120Hz) | |
| ESR (100kHz-300kHz, 20C) | See table below (max.) | |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 | |
| Endurance | 2,000 hours at +105C | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value |
| Humidity Test | 2,000 hours at 60C, 90%-95% RH (without voltage) | Meets Endurance characteristics |
| Surge Test | 1,000 cycles (charge 30s, discharge 5min 30s) | Appearance: No significant damage Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value |
Standard Ratings Table (Partial)
| VDC (SV) | Cap (F) | Size (DxL mm) | ESR (m, 20C, 100kHz) (max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A) (max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.7 | 23 | 140 | 3.5 |
| 6.3 (7.2) | 270 | 6.3x9.5 | 18 | 170 | 3.9 |
| 6.3 (7.2) | 330 | 6.3x11.5 | 15 | 200 | 4.2 |
| 6.3 (7.2) | 390 | 8x9.5 | 13 | 230 | 4.5 |
| 6.3 (7.2) | 470 | 8x11.5 | 11 | 270 | 4.8 |
| 6.3 (7.2) | 560 | 8x13.5 | 10 | 300 | 5.1 |
| 6.3 (7.2) | 680 | 10x11.5 | 8.5 | 350 | 5.5 |
| 6.3 (7.2) | 820 | 10x13.5 | 7.5 | 400 | 5.8 |
| 6.3 (7.2) | 1000 | 10x15.5 | 6.5 | 450 | 6.1 |
| 7.5 (8.6) | 470 | 8x9.5 | 13 | 230 | 4.8 |
| 7.5 (8.6) | 680 | 10x11.5 | 8.5 | 350 | 5.8 |
| 10 (11.5) | 470 | 8x9.5 | 13 | 230 | 5.5 |
| 10 (11.5) | 820 | 10x13.5 | 7.5 | 400 | 6.8 |
| 12 (13.8) | 470 | 8x9.5 | 13 | 230 | 6.1 |
| 12 (13.8) | 1000 | 10x13.5 | 7.5 | 400 | 7.5 |
| 16 (18.4) | 220 | 6.3x7.7 | 23 | 140 | 7.0 |
| 16 (18.4) | 470 | 8x9.5 | 13 | 230 | 8.0 |
| 16 (18.4) | 1000 | 10x13.5 | 7.5 | 400 | 10.0 |
| 16 (18.4) | 1500 | 12.5x13.5 | 6.0 | 500 | 11.0 |
| 20 (23) | 1000 | 10x13.5 | 7.5 | 400 | 10.0 |
| 20 (23) | 1500 | 12.5x13.5 | 6.0 | 500 | 11.0 |
| 20 (23) | 2200 | 12.5x15.5 | 5.0 | 600 | 12.0 |
| 25 (29) | 1500 | 12.5x13.5 | 6.0 | 500 | 11.0 |
| 25 (29) | 2200 | 12.5x15.5 | 5.0 | 600 | 12.0 |
| 25 (29) | 3300 | 16x15.5 | 4.0 | 700 | 13.0 |
| 35 (41) | 2200 | 12.5x15.5 | 5.0 | 600 | 12.0 |
| 35 (41) | 3300 | 16x15.5 | 4.0 | 700 | 13.0 |
| 35 (41) | 4700 | 18x15.5 | 3.5 | 800 | 14.0 |
| 50 (58) | 3300 | 16x15.5 | 4.0 | 700 | 13.0 |
| 50 (58) | 4700 | 18x15.5 | 3.5 | 800 | 14.0 |
| 50 (58) | 5600 | 18x18.5 | 3.0 | 900 | 15.0 |
| 63 (73) | 4700 | 18x15.5 | 3.5 | 800 | 14.0 |
| 63 (73) | 5600 | 18x18.5 | 3.0 | 900 | 15.0 |
| 80 (92) | 5600 | 18x18.5 | 3.0 | 900 | 15.0 |
| 100 (115) | 5600 | 18x18.5 | 3.0 | 900 | 15.0 |
Soldering Recommendations
Flow Soldering (Radial Lead Type):
- Preheating: 13020C, 30-90 sec.
- Cooling: <1 sec.
- Soldering Temperature: 260C max.
- Soldering Time: <1 sec.
Reflow Soldering (For Polymer SMD Type):
- Recommended Reflow Profile: Peak temperature (T1), Preheating (T2), Cooling (T3). Refer to detailed profile charts in source document.
- Preheating: 150C to 180C, Within 90 sec.
Reflow Soldering (For Liquid SMD Type):
- Case size: 6.3-10mm: Peak temperature 230C, Duration over 200C 90 sec (for 6.3) or 60 sec (for 10), Duration over T.C 40 sec (for 6.3) or 30 sec (for 10). Preheat at 100C to 200C for max 180 sec.
- Case size: 12.5-18mm: Peak temperature 230C, Duration over 200C 90 sec, Duration over T.C 40 sec. Preheat at 100C to 180C for max 150 sec.
Part Numbering System
The part numbering system for AISHi capacitors follows a structured format: Category Code, Series Code, Size Code, Capacitance Code, Capacitance Tolerance Code, Voltage Code, Terminal Code, Sleeve Marking Code.
Dimensions
Dimensions are provided in mm. Refer to the source document for detailed dimension charts based on case size and lead forming specifications.
2410121342_AISHI-SPZ1CM331E09O00RAXXX_C2688257.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
