<
>
Specifications
Voltage Rating:
16V
Capacitance:
470uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
12mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
10mm
Mfr. Part #:
SPZ1CM471G12O00RAXXX
Model Number:
SPZ1CM471G12O00RAXXX
Package:
Through Hole,D10xL12mm
Key Attributes
Product Description
Product Overview
The AiSHi PZ series of conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low ESR and long endurance. These RoHS compliant and lead-free components are suitable for system boards, display cards, small chargers, and intelligent TVs. They offer a wide operating temperature range and a variety of voltage and capacitance ratings.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Material: Conductive Polymer Aluminum Electrolytic
- Certifications: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Conductive Polymer Electrolytic Capacitor |
| Series Code | PZ | PZ Series |
| Endurance | +105C 2,000 hours | Low ESR |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | |
| Temperature Range | -55C to +105C | |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc | |
| Nominal Capacitance Range | 4.7F to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | |
| Dissipation Factor (tan) | 0.15 (at 20C, 120Hz) | |
| ESR (100~300kHz, 20C) | Refer to Standard Ratings table | |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) | 1.25 |
| Z(-55C)/Z(+20C) | 1.25 | |
| Endurance Test Requirements | Capacitance Change: 20% of initial value; D.F. (tan): 150% of initial specified value; ESR: 150% of initial specified value; Leakage Current: Initial specified value | |
| Humidity Test Requirements | Meet Endurance characteristics after 2,000 hours at 60C, 90%-95% RH without voltage | |
| Surge Test Requirements | Appearance: No significant damage; Capacitance Change: 20% of initial value; D.F. (tan): 50% of initial specified value; ESR: 150% of initial specified value; Leakage Current: Initial specified value | |
| Part Numbering System | Category Code, Series Code, Size Code, Capacitance Code, Capacitance Tolerance Code, Voltage Code, Terminal Code, Sleeve Marking Code | |
Standard Ratings (Selected Examples)
| VDC (V) | Cap (F) | Size DxL (mm) | ESR (m, 20C, 100kHz) (max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A) (max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 23 | 110 | 44 |
| 10 (11.5) | 470 | 10x12 | 11 | 210 | 80 |
| 16 (18.4) | 470 | 10x12 | 11 | 210 | 80 |
| 35 (41) | 1000 | 12.5x20 | 8 | 300 | 140 |
| 50 (58) | 1000 | 16x25 | 7 | 350 | 160 |
| 100 (115) | 560 | 18x30 | 6 | 400 | 200 |
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec.
- Cooling: (1-3C)/sec. (max.)
- Soldering Temperature: <260C
- Soldering Time: <1 sec.
Reflow Soldering (Polymer SMD Type)
- Recommended Reflow Profile: Refer to provided diagrams for T1, T2, T3, t1, t2, t3 parameters.
- Preheating: 150C to 180C within 90 sec.
- Peak Temperature (T1): 230C - 260C
- Time above 200C (t1): Max. 40 sec.
- Time above T.C (t): Max. 30 sec.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3 - 10mm:
- Preheat: 100C to 200C, Max. 180 seconds.
- Peak temperature (T1): 230C - 250C (Max. 5 sec.)
- Temperature at surface of capacitor shall not exceed T.C.
- Duration over 200C (t): Max. 90 sec.
- Duration over T.C (t1): Max. 40 sec.
- Case size: 12.5 - 18mm:
- Preheat: 100C to 180C, Max. 150 seconds.
- Peak temperature (T1): 230C - 240C (Max. 5 sec.)
- Temperature at surface of capacitor shall not exceed T.C.
- Duration over 200C (t): Max. 60 sec.
- Duration over T.C (t1): Max. 30 sec.
2409272202_AISHI-SPZ1CM471G12O00RAXXX_C2691835.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
