<
>
Specifications
Voltage Rating:
25V
Capacitance:
330uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
12mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
10mm
Mfr. Part #:
SPZ1EM331G12O00RAXXX
Model Number:
SPZ1EM331G12O00RAXXX
Package:
Through Hole,D10xL12mm
Key Attributes
Product Description
Product Overview
AiSHi PZ series Conductive Polymer Aluminum Electrolytic Capacitors offer high performance with low ESR and long endurance. Designed for demanding applications, these capacitors are RoHS compliant and lead-free. They are suitable for use in system boards, display cards, small chargers, and intelligent TVs, providing reliable power solutions.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Type Code | E (Conductive Polymer) |
| Series Code | PZ |
| Temperature Range | -55 to +105C |
| Rated Working Voltage Range | 6.3 to 100Vdc |
| Nominal Capacitance Range | 4.7 to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current (max.) | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) |
| Dissipation Factor (tan) (max.) | 0.08 (6.3V), 0.12 (6.8-10V), 0.15 (16-100V) (at 20C, 120Hz) |
| ESR (100-300kHz, 20C) | See Standard Ratings table |
| Impedance Ratio at 100kHz | Z(+105C)/Z(+20C) 1.25 |
| Impedance Ratio at 100kHz | Z(-55C)/Z(+20C) 1.25 |
| Endurance | +105C, 2,000 hours |
| Humidity Test | Meets Endurance characteristics after 2,000 hours at 60C, 90%-95% RH (no voltage) |
| Surge Test | Meets requirements after 1,000 cycles (charge 30 sec, discharge 5 min 30 sec) |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
Standard Ratings (Example: 6.3Vdc)
| VDC (SV) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.7 | 18 | 210 | 3.0 |
| 6.3 (7.2) | 270 | 6.3x9.5 | 15 | 250 | 3.3 |
| 6.3 (7.2) | 330 | 6.3x11.5 | 13 | 280 | 3.6 |
| 6.3 (7.2) | 390 | 8x9.5 | 12 | 330 | 3.9 |
| 6.3 (7.2) | 470 | 8x11.5 | 10 | 360 | 4.2 |
| 6.3 (7.2) | 560 | 8x13.5 | 9 | 400 | 4.5 |
| 6.3 (7.2) | 680 | 10x11.5 | 8 | 450 | 4.8 |
| 6.3 (7.2) | 820 | 10x13.5 | 7 | 500 | 5.1 |
| 6.3 (7.2) | 1000 | 10x16 | 6 | 550 | 5.4 |
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec
- Cooling: <1 sec
- Soldering: 260C max, <1 sec
Reflow Soldering (Polymer SMD Type)
Recommended Reflow Profile specifications are provided in graphical format within the source document.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3-10mm
- Preheat: 100C to 200C, Max 180 seconds
- Peak temperature: 230C (max. 5 sec)
- Temperature at surface of capacitor shall not exceed T.C.
- Duration over 200C: t sec (max.)
- Duration over T.C.: t sec (max.)
- Case size: 12.5-18mm
- Preheat: 100C to 180C, Max 150 seconds
- Peak temperature: 230C (max. 5 sec)
- Temperature at surface of capacitor shall not exceed T.C.
- Duration over 200C: t sec (max.)
- Duration over T.C.: t sec (max.)
2409272202_AISHI-SPZ1EM331G12O00RAXXX_C2691838.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
