Product Overview
The AishiCAP PF series are solid aluminum electrolytic capacitors utilizing conductive polymer electrolyte. Designed for stable operation at rated voltage across a wide temperature range of -55C to 105C, these capacitors offer reliable performance in demanding applications. Key features include low impedance at both high and low temperatures, stable electrical characteristics, and robust endurance under various environmental and electrical stresses. They are suitable for industrial equipment and applications where reliability is paramount.
Product Attributes
- Brand: AishiCAP
- Series: PF
- Electrolyte Type: Conductive Polymer Electrolyte
- Construction: Solid Aluminum Electrolytic Capacitor
- Marking Ink Color: Red
Technical Specifications
| AISHI P/N | Rated Work Voltage (V.DC) | Nominal Capacitance 120Hz, 20 (F) | Capacitance Tolerance (%) | Operating Temp () | Nominal Case Size D*L (mm) | ESR 100KHz, 20 (mmax) | Max Leakage Current 20 (A max) | D.F 120Hz, 20 (%max) | Load Life (Hours) |
|---|---|---|---|---|---|---|---|---|---|
| SPF0JM152G12C35RAXXX | 6.3 | 1500 | -20+20 | -55105 | 10*12 | 11 | 1890 | 8 | 5000 |
Part Number System
Category Code: S (Solid Capacitor)
Series Code: PF
Voltage Code: 0J (6.3V)
Capacitance Tolerance: M (-20% ~ +20%)
Capacitance Code: 152 (1500F)
Size Code: G12 (10*12mm)
Terminal Code: C35 (Platform rubber & Lead Cut 3.50.3mm)
Marking Code: R (Red)
Special Code: AXXX (Normal products)
Endurance Performance Summary
- Load Life Test: 5000 hours at 105 with rated DC voltage.
- Resistance to Vibration: Complies with JIS C 5102 & JIS C 5025.
- Solder Ability: Meets specified conditions at 2355C for 20.5s.
- Resistance to Soldering Heat: Meets specified conditions at 2605C for 101s (solder bath) or 40010C for 3+1/-0s (soldering iron).
- Resistance to Damp Heat (Steady State): 2000 hours at 602, 90-95% RH without load.
- Rapid Change of Temperature: 10 cycles with specified parameters.
- Surge Voltage: Withstands specified surge voltage cycles.
- Terminal Strength: Meets tensile and bending strength requirements based on lead wire diameter.
- High Temperature Storage: 1000 hours at 1052.
Operating Precautions
- Polarity: Must not be reverse connected.
- Prohibited Circuits: High impedance, coupling, time constant, series connection for higher voltage, circuits sensitive to leakage current.
- Over Voltage: Do not exceed rated voltage.
- Rapid Charge/Discharge: Unsuitable; protection circuit recommended if instantaneous current exceeds 10A.
- Soldering: Adhere to specified conditions to prevent increased leakage current and capacitance reduction.
- Storage: Store between 5-35 (or 35-85 for less than 3 months), <75% RH, away from direct sunlight, moisture, and corrosive gases. Unsealed within 1 month of opening, within 1 year of delivery before unsealing. Discard if storage exceeds 3 years.
Construction Details
- Lead wires: Solid tinned copper weld steel wire.
- Electrolyte: Conductive polymer.
- Cathode foil: Carbon foil, High purity aluminum.
- Anode foil: High pure aluminum.
- Case: Coating AL-case (Aluminum + coating).
2209061730_AISHI-SPF0JM152G12C35RAXXX_C5123336.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
