Product Overview
AiSHi PZ series conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low ESR and long endurance. These RoHS compliant and lead-free components are suitable for system boards, display cards, small chargers, and intelligent TVs. They offer a wide operating temperature range and reliable performance under various conditions.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Type Code | S (Conductive Polymer) |
| Endurance | +105C, 2,000 hours |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
| Temperature Range | -55C to +105C |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc |
| Nominal Capacitance Range | 4.7F to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) |
| Dissipation Factor (tan) | See table for values (at 20C, 120Hz) |
| ESR (100~300kHz, 20C) | See table for values |
| Temperature Characteristic (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 |
| Endurance Test Requirements | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value |
| Humidity Test Requirements | Meets Endurance characteristics after 2,000 hours at 60C, 90%-95% RH (no voltage applied) |
| Surge Test Requirements | Appearance: No significant damage Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value |
Standard Ratings (Examples)
| VDC (SV) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 23 | 210 | 4.4 |
| 6.3 (7.2) | 270 | 6.3x7.2 | 19 | 230 | 4.8 |
| 10 (11.5) | 470 | 10x11.5 | 12 | 380 | 7.0 |
| 16 (18.4) | 470 | 10x12.5 | 12 | 380 | 7.0 |
| 25 (29) | 470 | 12.5x20 | 10 | 470 | 7.0 |
| 35 (41) | 470 | 12.5x20 | 10 | 470 | 7.0 |
| 50 (58) | 470 | 16x25 | 8 | 600 | 7.0 |
| 63 (73) | 470 | 16x25 | 8 | 600 | 7.0 |
| 80 (92) | 470 | 18x25 | 7 | 680 | 7.0 |
| 100 (115) | 470 | 18x25 | 7 | 680 | 7.0 |
Soldering Recommendations
Flow Soldering (Radial Lead Type):
- Preheating: 13020C, 30-90 sec.
- Cooling: <1 sec.
- Soldering Temperature: 260C max.
- Soldering Time: <1 sec.
Reflow Soldering (Polymer SMD Type):
- Recommended Reflow Profile: Refer to diagram (T1, T2, T3, t1, t2, t3 specified)
- Preheating: 150C to 180C, Within 90 sec.
Reflow Soldering (Liquid SMD Type):
- Case size: 6.3-10mm:
Preheat: 100C to 200C, Max 180 seconds.
Peak temperature: 230C to 250C, Max 5 sec.
Duration over 200C: Max 90 sec.
Duration over T.C: Max 40 sec. (for 6.3mm), Max 30 sec. (for 8mm, 10mm) - Case size: 12.5-18mm:
Preheat: 100C to 180C, Max 150 seconds.
Peak temperature: 230C to 235C, Max 5 sec.
Duration over 200C: Max 60 sec.
Duration over T.C: Max 30 sec.
Note: Contact AiSHi for conditions other than allowable reflow ranges.
Part Numbering System
The AiSHi part numbering system follows the structure: Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code.
2411041757_AISHI-SPZ1TM681E11O00R_C112531.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
