<
>
Specifications
Voltage Rating:
10V
Capacitance:
330uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
2.5mm
Height - Seated (Max):
8mm
Equivalent Series Resistance(ESR):
20mΩ@100kHz
Operating Temperature:
-55℃~+105℃
Diameter:
6.3mm
Ripple Current:
3.3A@100kHz
Mfr. Part #:
SPZ1AM331E08O00R
Model Number:
SPZ1AM331E08O00R
Package:
Through Hole,D6.3xL8mm
Key Attributes
Product Description
Product Overview
The AishiCAP PZ series are Aluminum Solid Electrolytic Capacitors featuring a conductive polymer electrolyte. Designed for stable operation at rated voltage within a specified ambient temperature range, these capacitors are suitable for various industrial applications. They offer reliable performance across a wide operating temperature range and are constructed with high-purity aluminum foil and conductive polymer electrolyte for enhanced durability and performance.
Product Attributes
- Brand: AishiCAP
- Manufacturer: HUNAN AIHUA GROUP CO., LTD
- Origin: China
- Series: PZ
- Electrolyte Type: Conductive Polymer Electrolyte
- Marking Ink Color: Red
Technical Specifications
| AISHI P/N | Rated Work Voltage (V.DC) | Nominal Capacitance (F) | Capacitance Tolerance (%) | Operating Temp (C) | Nominal Case Size D*L (mm) | E.S.R. (mmax) @ 100KHz, 20 | Max Leakage Current (A max) @ 20 (2 Minutes/W.V) | D.F. (%max) @ 120Hz, 20 | Ripple Current (mA.rms) @ 100KHz, 105 | Load Life (Hours) |
|---|---|---|---|---|---|---|---|---|---|---|
| SPZ1AM331E08O00RAXXX | 10 | 330 | -20+20 | 105 | 6.3*8 | 20 | 660 | 12 | 3300 | 2000 |
General Specifications
- Operating Temperature Range: -55105 (2.5V100V)
- Standard Measurement Conditions: Ambient temperature: 15 to 35, Relative humidity: 45 to 85%, Air pressure: 86kpa to 106kpa
- Measurement Limits: Ambient temperature: 202, Relative humidity: 60 to 70%, Air pressure: 86kpa to 106kpa
Rated Voltage, Surge Voltage, and Rated Temperature
| Rated voltage (V) | Rated temperature (C) | Surge voltage (V) | Category voltage (V) |
|---|---|---|---|
| 2.5 | 105 | 2.9 | 2.5 |
| 6.3 | 105 | 7.2 | 6.3 |
| 7.5 | 105 | 8.6 | 7.5 |
| 10 | 105 | 11.5 | 10 |
| 25 | 105 | 28.8 | 25 |
| 50 | 105 | 57.5 | 50 |
| 80 | 105 | 92.0 | 80 |
| 100 | 105 | 115.0 | 100 |
High and Low Temperature Impedance
| Condition | Impedance Ratio | Performance |
|---|---|---|
| Impedance at 100kHz at -553 or 1052 | Z (-55) / Z (+20) | 0.75 to 1.25 |
| Z (105) / Z (+20) | 0.75 to 1.25 |
Construction
- Lead wires: Solid tinned copper weld steel wire
- Al-boss: High pure aluminum
- Paper: Manila hemp
- Al-foil (Anode): High pure aluminum
- Al-foil (Cathode): Carbon foil, High purity aluminum
- Coating AL- case: Aluminum+coating (Can withstand voltage above 600V)
- Tape: Polyester
- Electrolyte: Conductive polymer
Marking
- Year code
- Week code
- Series: PZ series
- Rated Capacitance: 330UF
- Rated voltage: 10WV
Storage
- Temperature: 5 to 35 (less than three months if between 35 to 85)
- Relative Humidity: 75% or less, without direct sunshine
- Before unseal: Within 1 year after delivery
- After seal: Within 1 month from opening
Operating Precautions
- Polarity: Do not reverse polarity.
- Prohibited circuits: High impedance circuits, Coupling circuits, Time constant circuits, Series connection for higher withstand voltage, Circuits sensitive to leakage current.
- Over voltage: Do not exceed rated voltage.
- Sudden charge and discharge: Restricted; protection circuit recommended.
- Soldering: Adhere to specified conditions to prevent increased leakage current and capacitance reduction.
- Reuse: Do not reuse assembled or energized capacitors.
- Storage after one year: Apply rated voltage for 2 hours at 105 with a 1 k resistor.
- Reflow soldering: Not applicable for radial lead type capacitors.
- Handling after soldering: Avoid tilting, bending, or twisting; do not move PCB by catching the capacitor.
- Industrial Equipment: Design must ensure reliability.
- Life Support Systems: Consult Hunan Aihua Group Co., Ltd. before use.
Notes on Circuit Designs
- Performance: Use within specified rating and performance ranges.
- Operating temperature and ripple current: Exceeding limits can shorten life and increase leakage current.
- Leakage current: May slightly increase after soldering; self-repairable with DC voltage.
- Applied voltage: Recommended to be less than 80% of rated voltage; peak AC+DC should not exceed rated voltage.
- Failure mode: Primarily short circuit, leading to overheating and potential case rupture.
- Change Notification: Changes to specifications will be communicated in advance.
1806040933_AISHI-SPZ1AM331E08O00R_C156452.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
