<
>
Specifications
Voltage Rating:
16V
Capacitance:
470uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
5mm
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
10mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
10mm
Mfr. Part #:
SPZ1CM471G10O00RAXXX
Model Number:
SPZ1CM471G10O00RAXXX
Package:
Through Hole,D10xL10mm
Key Attributes
Product Description
AISHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
Product Overview
The AISHi PZ series offers conductive polymer aluminum electrolytic capacitors designed for a wide range of electronic applications. These capacitors are characterized by their low ESR, endurance, and compliance with RoHS and lead-free standards. They are suitable for use in system boards, display cards, small chargers, and intelligent TVs, providing reliable performance and long-term stability.
Product Attributes
- Brand: AISHi
- Series: PZ Series
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant and Lead-free
Technical Specifications
Part Numbering System
The part numbering system is structured as follows:
Category Code Series Code Size Code Capacitance Code Capacitance Tolerance Code Voltage Code Terminal Code Sleeve Marking Code
General Specifications
| Item | Specification |
|---|---|
| Category | Conductive Polymer Aluminum Electrolytic Capacitor |
| Endurance | +105C 2,000 hours |
| Key Feature | Low ESR |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
| Temperature Range | -55C to +105C |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc |
| Nominal Capacitance Range | 4.7F to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) |
| Dissipation Factor (tan) | See table below (at 20C, 120Hz) |
| ESR | See table below (100~300kHz, 20C) |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 |
Dissipation Factor (tan) and ESR Values
| Rated Voltage (Vdc) | Capacitance (F) | tan (max.) | ESR (m, 20C, 100kHz) (max.) |
|---|---|---|---|
| 6.3 | 220-680 | 0.08 | - |
| 10 | 220-820 | 0.12 | - |
| 16 | 100-680 | 0.15 | - |
| 25 | 47-470 | 0.15 | - |
| 35 | 47-390 | 0.15 | - |
| 50 | 22-330 | 0.15 | - |
| 63 | 10-270 | 0.15 | - |
| 100 | 4.7-220 | 0.15 | - |
Standard Ratings (Examples)
| VDC (V) | Cap (F) | Size DxL (mm) | ESR (m, 20C, 100kHz) (max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A) (max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | - | - | - |
| 6.3 (7.2) | 270 | 6.3x9 | - | - | - |
| 6.3 (7.2) | 330 | 6.3x11 | - | - | - |
| 6.3 (7.2) | 390 | 8x9 | - | - | - |
| 6.3 (7.2) | 470 | 8x11.5 | - | - | - |
| 6.3 (7.2) | 560 | 8x16 | - | - | - |
| 6.3 (7.2) | 680 | 10x12.5 | - | - | - |
| 7.5 (8.6) | 470 | 8x11.5 | - | - | - |
| 7.5 (8.6) | 680 | 10x12.5 | - | - | - |
| 7.5 (8.6) | 820 | 10x16 | - | - | - |
| 10 (11.5) | 470 | 10x12.5 | - | - | - |
| 10 (11.5) | 680 | 10x16 | - | - | - |
| 10 (11.5) | 820 | 10x20 | - | - | - |
| 12 (13.8) | 330 | 10x16 | - | - | - |
| 12 (13.8) | 470 | 10x20 | - | - | - |
| 12 (13.8) | 560 | 10x25 | - | - | - |
| 16 (18.4) | 220 | 10x20 | - | - | - |
| 16 (18.4) | 330 | 10x25 | - | - | - |
| 16 (18.4) | 390 | 12.5x16 | - | - | - |
| 20 (23) | 150 | 10x25 | - | - | - |
| 20 (23) | 220 | 12.5x20 | - | - | - |
| 20 (23) | 270 | 12.5x25 | - | - | - |
| 25 (29) | 100 | 12.5x20 | - | - | - |
| 25 (29) | 150 | 12.5x25 | - | - | - |
| 25 (29) | 180 | 16x20 | - | - | - |
| 35 (41) | 68 | 12.5x20 | - | - | - |
| 35 (41) | 100 | 12.5x25 | - | - | - |
| 35 (41) | 120 | 16x20 | - | - | - |
| 35 (41) | 150 | 16x25 | - | - | - |
| 50 (58) | 47 | 16x20 | - | - | - |
| 50 (58) | 68 | 16x25 | - | - | - |
| 50 (58) | 82 | 18x20 | - | - | - |
| 63 (73) | 33 | 16x25 | - | - | - |
| 63 (73) | 47 | 18x20 | - | - | - |
| 63 (73) | 56 | 18x25 | - | - | - |
| 80 (92) | 22 | 18x20 | - | - | - |
| 80 (92) | 33 | 18x25 | - | - | - |
| 100 (115) | 10 | 18x20 | - | - | - |
| 100 (115) | 15 | 18x25 | - | - | - |
Reliability Tests
| Test | Conditions | Requirements |
|---|---|---|
| Endurance | Rated voltage for 2,000 hours at 105C | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value Appearance: No significant damage |
| Humidity Test | 90%-95% RH for 2,000 hours at 60C (no voltage applied) | Shall meet Endurance characteristics |
| Surge Test | 1,000 cycles (charge 30 sec with surge voltage, discharge 5 min 30 sec) | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value Appearance: No significant damage |
Soldering Recommendations
- Flow Soldering (Radial Lead Type): Preheating: 13020C, 30-90 sec. Cooling: <1C/sec. Soldering: Approx. 260C, <1 sec.
- Reflow Soldering (Polymer SMD Type): Refer to recommended reflow profile.
- Reflow Soldering (Liquid SMD Type): Specific profiles provided for case sizes 6.3-10mm and 12.5-18mm.
Lead Forming and Taping Specifications
Various lead forming and taping specifications are available, including codes C, F, J, and P, with detailed dimensions and pitch information provided in the source document.
Note: Specifications are subject to change without notice.
2409272202_AISHI-SPZ1CM471G10O00RAXXX_C106488.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
