<
>
Specifications
Voltage Rating:
35V
Capacitance:
330uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
-
Equivalent Series Resistance(ESR):
-
Height - Seated (Max):
12mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
-
Diameter:
10mm
Mfr. Part #:
SPZ1VM331G12O00RAXXX
Model Number:
SPZ1VM331G12O00RAXXX
Package:
Through Hole,D10xL12mm
Key Attributes
Product Description
AiSHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
The AiSHi PZ series offers Conductive Polymer Aluminum Electrolytic Capacitors designed for high-reliability applications. These capacitors feature low ESR, RoHS compliance, and lead-free construction, making them suitable for modern electronic designs. They are engineered for extended endurance and stable performance across a wide temperature range.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Electrolytic Capacitor |
| Type Code | PZ | Conductive Polymer |
| Temperature Range | -55 to +105C | |
| Rated Working Voltage Range | 6.3 to 100Vdc | |
| Nominal Capacitance Range | 4.7 to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | (after 2 minutes) |
| Dissipation Factor (tan) | See table below (at 20C, 120Hz) | |
| ESR | See table below (100kHz-300kHz, 20C) | |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 | |
| Z(-55C)/Z(+20C) 1.25 | ||
| Endurance | 2,000 hours at +105C | Capacitance Change: 20% of initial value; D.F. (tan): 150% of initial specified value; ESR: 150% of initial specified value; Leakage Current: Initial specified value |
| Humidity Test | 2,000 hours at 60C, 90%-95% RH (without voltage) | Meets Endurance characteristics |
| Surge Test | 1,000 cycles (charge/discharge) | Meets Endurance characteristics |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
Dissipation Factor (tan) & ESR Table (Typical)
| Rated Voltage (Vdc) | Capacitance (F) | tan (max.) | ESR (m) (max.) |
|---|---|---|---|
| 6.3 | 220-470 | 0.08 | 23 |
| 6.3 | 560-680 | 0.12 | 18 |
| 10 | 220-470 | 0.08 | 23 |
| 10 | 560-680 | 0.12 | 18 |
| 16 | 220-470 | 0.08 | 23 |
| 16 | 560-680 | 0.12 | 18 |
| 25 | 220-470 | 0.08 | 23 |
| 25 | 560-680 | 0.12 | 18 |
| 35 | 220-470 | 0.08 | 23 |
| 35 | 560-680 | 0.12 | 18 |
| 50 | 220-470 | 0.08 | 23 |
| 50 | 560-680 | 0.12 | 18 |
| 63 | 220-470 | 0.08 | 23 |
| 63 | 560-680 | 0.12 | 18 |
| 100 | 220-470 | 0.08 | 23 |
| 100 | 560-680 | 0.12 | 18 |
Dimensions (mm)
| Capacitance (F) | Diameter (D) | Length (L) |
|---|---|---|
| 4.7 | 4 | 5.7 |
| 6.8 | 4 | 5.7 |
| 10 | 5 | 7 |
| 12 | 5 | 7 |
| 16 | 5 | 7 |
| 22 | 6.3 | 7.5 |
| 27 | 6.3 | 7.5 |
| 33 | 6.3 | 9 |
| 47 | 6.3 | 11.5 |
| 56 | 6.3 | 11.5 |
| 68 | 8 | 11.5 |
| 82 | 8 | 11.5 |
| 100 | 8 | 11.5 |
| 120 | 8 | 11.5 |
| 150 | 8 | 11.5 |
| 180 | 8 | 11.5 |
| 220 | 10 | 12.5 |
| 270 | 10 | 12.5 |
| 330 | 10 | 12.5 |
| 390 | 10 | 12.5 |
| 470 | 10 | 12.5 |
| 560 | 10 | 12.5 |
| 680 | 12.5 | 13 |
| 820 | 12.5 | 13 |
| 1000 | 12.5 | 13 |
| 1200 | 12.5 | 13 |
| 1500 | 12.5 | 13 |
| 1800 | 12.5 | 13 |
| 2200 | 16 | 16 |
| 2700 | 16 | 16 |
| 3300 | 16 | 16 |
| 3900 | 16 | 16 |
| 4700 | 16 | 16 |
| 5600 | 16 | 16 |
Part Numbering System
The part numbering system follows the structure: Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code.
Example Breakdown:
- Category Code: E (Electrolytic Capacitor)
- Series Code: PZ (Conductive Polymer)
- Size Code: Varies based on dimensions (e.g., D, E, F, G, H, J, K, L, M, N, P, Q, R, S, T, U, V, Y)
- Capacitance Code: Varies based on capacitance value (e.g., 4.7, 6.8, 10, 22, 100, 1000, 10000)
- Capacitance Tolerance Code: M (20%)
- Voltage Code: Varies based on rated voltage (e.g., 6.3, 10, 16, 25, 35, 50, 63, 100)
- Terminal Code: Varies based on terminal type and packaging (e.g., 0, 1, 2, 3, 4, 5, 6, A, B, C, D, F, J)
- Sleeve Marking Code: Varies based on sleeve material and color (e.g., C, T, B, R, S, L, T, Z, H, V)
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec.
- Cooling: <1 sec.
- Soldering Temperature: 260C max.
- Soldering Time: <5 sec.
Reflow Soldering (Polymer SMD Type)
Recommended Reflow Profile:
- Preheating: 150C to 180C, within 90 sec.
- Peak Temperature (T1): 230C (max. 10 sec.)
- Soldering Time (t1): 30-60 sec.
- Cooling Time (t2): 150 sec. max.
Reflow Soldering (Liquid SMD Type)
- Case Size: 6.3 - 10mm
- Preheat: 100C to 200C, max. 180 sec.
- Peak Temperature (T1): 230C - 250C (max. 5 sec.)
- Duration over 200C (t): 90 sec. max.
- Duration over T.C. (t1): 40 sec. max. (for 6.3), 30 sec. max. (for 8, 10)
- Case Size: 12.5 - 18mm
- Preheat: 100C to 180C, max. 150 sec.
- Peak Temperature (T1): 230C - 240C (max. 5 sec.)
- Duration over 200C (t): 60 sec. max.
- Duration over T.C. (t1): 30 sec. max.
2410121342_AISHI-SPZ1VM331G12O00RAXXX_C2688261.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
