<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
470uF
Lifetime:
5000hrs@105℃
Tolerance:
±20%
Pin Spacing:
2.5mm
Equivalent Series Resistance(ESR):
8mΩ@100kHz
Height - Seated (Max):
8mm
Ripple Current:
5.6A@100kHz
Diameter:
6.3mm
Operating Temperature:
-55℃~+105℃
Mfr. Part #:
SPZ0JM471E08P25RS502
Model Number:
SPZ0JM471E08P25RS502
Package:
Through Hole,D6.3xL8mm
Key Attributes
Product Description
Product Overview
The Aishi PZ series is a range of Aluminum Solid Electrolytic Capacitors featuring a conductive polymer electrolyte. Designed for reliable operation in demanding environments, these capacitors offer stable performance across a wide temperature range (-55 to 105). They are suitable for various industrial applications where consistent electrical characteristics and long-term endurance are critical. Key features include low impedance at high and low temperatures, and robust construction for various environmental stresses.
Product Attributes
- Brand: Aishi
- Series: PZ
- Electrolyte Type: Conductive Polymer Electrolyte
- Origin: China (implied by company name Hunan Aihua Group Co., Ltd.)
- Marking Ink Color: Red
Technical Specifications
| AISHI P/N | Rated Work Voltage (V.DC) | Nominal Capacitance (F) | Capacitance Tolerance (%) | Operating Temp () | Nominal Case Size D*L (mm) | E.S.R (mmax) | Leakage Current (A max) | D.F (%max) | Ripple Current (mA.rms) | Load Life (Hours) |
|---|---|---|---|---|---|---|---|---|---|---|
| SPZ0JM471E08P25RS502 | 6.3 | 470 | -20+20 | 105 | 6.3*8 | 8 | 592 | 8 | 5600 | 5000 |
Part Number System
S PZ 0J M 471 E08 P25 R S502
- Category Code: S (Solid Capacitor)
- Series Code: PZ
- Voltage Code: 0J (6.3V)
- Capacitance Tolerance: M (-20% ~ +20%)
- Capacitance Code: 471 (470F)
- Size Code: E08 (6.3*8mm)
- Terminal Code: P25 (Platform rubber & Taping, Pitch=2.5mm)
- Marking Code: R (Red)
- Special Code: S502 (5000 hours)
Construction Details
- Lead wires: Solid tinned copper weld steel wire
- Al-boss: High pure aluminum
- Paper: Manila hemp
- Al-foil (Anode): High pure aluminum
- Al-foil (Cathode): Carbon foil, High purity aluminum
- Coating AL-case: Aluminum + coating (Can withstand voltage above 600V)
- Tape: Polyester
- Resin (Compression molding)
- Electrolyte: Conductive polymer
Operating Precautions
- Polarity: Do not reverse polarity.
- Prohibited Circuits: High impedance, coupling, time constant, series connection for higher voltage, circuits sensitive to leakage current.
- Over voltage: Do not exceed rated voltage.
- Rapid charge/discharge: Unsuitable if instantaneous current exceeds 10A or 10 times allowable ripple current. A protection circuit is recommended.
- Soldering: Adhere to specified conditions to prevent increased leakage current and capacitance reduction.
- Storage: Store between 5-35, <75% RH, away from direct sunlight, water, brine, oil, condensation, poisonous gases, UV, and radiation. Opened bags should be used within 1 month. Unopened products within 1 year of delivery. Products stored over 3 years should be discarded.
- Cleaning: Compatible with HCFC, higher alcohol system, petroleum system, terpene system, water system with surface active agent. Consult manufacturer for details.
Notes on Circuit Designs
- Operating Temperature and Ripple Current: Exceeding 105 or overload ripple current can shorten life and increase leakage current.
- Leakage Current: May rise slightly after soldering but self-repairs with DC voltage.
- Applied Voltage: Recommended to be less than rated voltage. Peak AC+DC should not exceed rated voltage.
- Failure Mode: Primarily short circuit, leading to overheating and potential case rupture.
2409300002_AISHI-SPZ0JM471E08P25RS502_C5123337.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
