Aishii PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
Product Overview
The Aishii PZ series offers conductive polymer aluminum electrolytic capacitors designed for demanding applications. These capacitors feature low ESR and are suitable for system boards, display cards, small chargers, and intelligent TVs. They are RoHS compliant and lead-free, ensuring environmental responsibility.
Product Attributes
- Brand: Aishii
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Electrolytic Capacitor |
| Type Code | PZ | Conductive Polymer |
| Endurance | +105C 2,000 hours | |
| Key Feature | Low ESR | |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | |
| Temperature Range | -55C to +105C | |
| Rated Working Voltage Range | 6.3Vdc to 100Vdc | |
| Nominal Capacitance Range | 4.7F to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | (Where I: Leakage current (A), C: Nominal capacitance (F), V: Rated voltage (V)) |
| Dissipation Factor (tan) | See table below | (at 20C, 120Hz) |
| ESR | See table below | (100~300kHz, 20C) |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25 Z(-55C)/Z(+20C) 1.25 | |
| Endurance Test Requirements | Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | (After 2,000 hours at 105C with rated voltage applied) |
| Humidity Test Requirements | Meets Endurance characteristics | (After 2,000 hours at 60C, 90%-95% RH, without voltage) |
| Surge Test Requirements | Appearance: No significant damage Capacitance Change: 20% of initial value D.F. (tan): 150% of initial specified value ESR: 150% of initial specified value Leakage Current: Initial specified value | (After 1,000 cycles of charge/discharge) |
Standard Ratings Table (Partial)
| VDC (V) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 23 | 210 | 4.4 |
| 6.3 (7.2) | 270 | 6.3x7.2 | 19 | 230 | 4.8 |
| 6.3 (7.2) | 330 | 6.3x7.2 | 16 | 250 | 5.3 |
| 6.3 (7.2) | 390 | 6.3x7.2 | 14 | 270 | 5.8 |
| 6.3 (7.2) | 470 | 6.3x7.2 | 12 | 290 | 6.3 |
| 6.3 (7.2) | 560 | 6.3x7.2 | 10 | 310 | 6.8 |
| 6.3 (7.2) | 680 | 6.3x7.2 | 9 | 330 | 7.3 |
| 10 (11.5) | 470 | 8x12 | 14 | 270 | 4.8 |
| 10 (11.5) | 680 | 8x12 | 10 | 320 | 5.8 |
| 10 (11.5) | 820 | 8x12 | 8 | 350 | 6.3 |
| 12.5 (14.3) | 1000 | 10x12.5 | 7 | 370 | 6.8 |
| 16 (18.4) | 470 | 6.3x16 | 18 | 220 | 4.4 |
| 16 (18.4) | 680 | 6.3x16 | 14 | 260 | 5.3 |
| 16 (18.4) | 820 | 6.3x16 | 12 | 280 | 5.8 |
| 16 (18.4) | 1000 | 8x16 | 10 | 300 | 6.3 |
| 16 (18.4) | 1200 | 8x16 | 9 | 320 | 6.8 |
| 16 (18.4) | 1500 | 10x16 | 8 | 340 | 7.3 |
| 20 (23) | 1000 | 8x20 | 10 | 300 | 6.3 |
| 20 (23) | 1200 | 8x20 | 9 | 320 | 6.8 |
| 20 (23) | 1500 | 10x20 | 8 | 340 | 7.3 |
| 20 (23) | 1800 | 10x20 | 7 | 360 | 7.8 |
| 25 (29) | 1500 | 10x25 | 8 | 340 | 7.3 |
| 25 (29) | 1800 | 10x25 | 7 | 360 | 7.8 |
| 25 (29) | 2200 | 12.5x25 | 6 | 380 | 8.3 |
| 35 (41) | 2200 | 10x35 | 7 | 360 | 7.8 |
| 35 (41) | 2700 | 12.5x35 | 6 | 380 | 8.3 |
| 35 (41) | 3300 | 12.5x35 | 5 | 400 | 8.8 |
| 35 (41) | 3900 | 12.5x35 | 5 | 410 | 9.3 |
| 35 (41) | 4700 | 16x35 | 4 | 430 | 9.8 |
| 50 (58) | 3300 | 12.5x50 | 5 | 400 | 8.8 |
| 50 (58) | 3900 | 12.5x50 | 5 | 410 | 9.3 |
| 50 (58) | 4700 | 16x50 | 4 | 430 | 9.8 |
| 50 (58) | 5600 | 18x50 | 3.5 | 450 | 10.3 |
| 63 (73) | 4700 | 16x63 | 4 | 430 | 9.8 |
| 63 (73) | 5600 | 18x63 | 3.5 | 450 | 10.3 |
| 80 (92) | 3900 | 16x80 | 4.5 | 410 | 9.3 |
| 80 (92) | 4700 | 18x80 | 4 | 430 | 9.8 |
| 80 (92) | 5600 | 20x80 | 3.5 | 450 | 10.3 |
| 100 (115) | 3300 | 16x100 | 5 | 400 | 8.8 |
| 100 (115) | 3900 | 18x100 | 4.5 | 410 | 9.3 |
| 100 (115) | 4700 | 20x100 | 4 | 430 | 9.8 |
Part Numbering System
The part numbering system follows this structure:
[Category Code][Series Code][Size Code][Capacitance Code][Capacitance Tolerance Code][Voltage Code][Terminal Code][Sleeve Marking Code]
Example: CD11GES G 475 K 16 V C
Soldering Recommendations
Flow Soldering (Radial Lead Type):
- Preheating: 13020C, 30-90 sec.
- Cooling: <1 sec.
- Soldering Temperature: 260C max.
- Soldering Time: <1 sec.
Reflow Soldering (Polymer SMD Type):
- Recommended Reflow Profile: See diagram in source document.
- Preheating: 150C to 180C, within 90 sec.
Reflow Soldering (Liquid SMD Type):
- Case size: 6.3 - 10mm: Peak Temp 230C, Duration over 200C 90 sec (6.3) / 60 sec (10), Duration over T.C 40 sec (6.3) / 30 sec (10). Preheat 100C to 200C for max 180 sec.
- Case size: 12.5 - 18mm: Peak Temp 230C, Duration over 200C 90 sec, Duration over T.C 40 sec. Preheat 100C to 180C for max 150 sec.
Lead Forming & Taping Specifications
Various lead forming and taping options are available, including bulk packing, taping (SMD Type), lead cut, lead forming & cut, kink & cut, and snap-in.
Dimensions
Dimensions vary based on the specific model and size code. Refer to the detailed tables in the source document for precise measurements.
Note: Specifications are subject to change without notice.
2409272202_AISHI-SPZ1VM821G18O00RAXXX_C2983792.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
