<
>
Specifications
Voltage Rating:
25V
Capacitance:
100uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
2.5mm
Equivalent Series Resistance(ESR):
30mΩ@100kHz
Height - Seated (Max):
8mm
Operating Temperature:
-55℃~+105℃
Diameter:
6.3mm
Ripple Current:
2.2A@100kHz
Mfr. Part #:
SPZ1EM101E08O00RAXXX
Model Number:
SPZ1EM101E08O00RAXXX
Package:
Through Hole,D6.3xL8mm
Key Attributes
Product Description
Product Overview
AiSHi PZ series conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low ESR and long endurance. These RoHS compliant and lead-free components are suitable for system boards, display cards, small chargers, and intelligent TVs. They offer reliable performance with a wide operating temperature range and various voltage and capacitance ratings.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Material: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
- Origin: (Implied from brand/datasheet context, but not explicitly stated as a country)
Technical Specifications
| Item | Specification |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Type Code | S (Conductive Polymer) |
| Series Code | PZ |
| Temperature Range | -55C to +105C |
| Rated Voltage Range | 6.3Vdc to 100Vdc |
| Nominal Capacitance Range | 4.7F to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) |
| Dissipation Factor (tan) | See table for values (at 20C, 120Hz) |
| ESR | See table for values (100~300kHz, 20C) |
| Temperature Characteristics (Impedance Ratio) | Z(+105C)/Z(+20C) 1.25; Z(-55C)/Z(+20C) 1.25 (at 100kHz) |
| Endurance | +105C, 2,000 hours |
| Humidity Test | 90%-95% RH for 2,000 hours at 60C without voltage applied |
| Surge Test | 1,000 cycles of charge/discharge |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
Standard Ratings (Example - PZ Series)
| VDC (V) | Cap (F) | Size DxL (mm) | ESR (m, 20C, 100kHz) (max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A) (max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 23 | 210 | 44 |
| 6.3 (7.2) | 270 | 6.3x7.2 | 19 | 230 | 48 |
| 6.3 (7.2) | 330 | 6.3x7.2 | 16 | 250 | 53 |
| 6.3 (7.2) | 390 | 6.3x7.2 | 14 | 270 | 57 |
| 6.3 (7.2) | 470 | 6.3x7.2 | 12 | 290 | 61 |
| 6.3 (7.2) | 560 | 6.3x7.2 | 10 | 310 | 65 |
| 6.3 (7.2) | 680 | 6.3x7.2 | 9 | 330 | 69 |
| 10 (11.5) | 470 | 10x11.5 | 11 | 370 | 61 |
| 10 (11.5) | 680 | 10x11.5 | 8 | 430 | 69 |
| 10 (11.5) | 820 | 10x11.5 | 7 | 470 | 73 |
| 16 (18.4) | 470 | 10x12 | 11 | 370 | 61 |
| 16 (18.4) | 680 | 10x12 | 8 | 430 | 69 |
| 16 (18.4) | 820 | 10x12 | 7 | 470 | 73 |
| 20 (23) | 680 | 10x12.5 | 8 | 430 | 69 |
| 20 (23) | 820 | 10x12.5 | 7 | 470 | 73 |
| 20 (23) | 1000 | 10x12.5 | 6 | 500 | 76 |
| 25 (29) | 1000 | 12.5x15 | 6 | 500 | 76 |
| 25 (29) | 1200 | 12.5x15 | 5 | 530 | 79 |
| 25 (29) | 1500 | 12.5x15 | 4.5 | 560 | 82 |
| 25 (29) | 1800 | 12.5x15 | 4 | 590 | 85 |
| 35 (41) | 1800 | 12.5x17.5 | 4 | 590 | 85 |
| 35 (41) | 2200 | 12.5x17.5 | 3.5 | 620 | 88 |
| 35 (41) | 2700 | 12.5x17.5 | 3 | 650 | 91 |
| 35 (41) | 3300 | 12.5x17.5 | 2.8 | 680 | 94 |
| 35 (41) | 3900 | 12.5x17.5 | 2.5 | 710 | 97 |
| 35 (41) | 4700 | 12.5x17.5 | 2.2 | 740 | 100 |
| 50 (58) | 4700 | 16x21.5 | 2.2 | 740 | 100 |
| 50 (58) | 5600 | 16x21.5 | 2 | 770 | 103 |
| 63 (73) | 5600 | 18x21.5 | 2 | 770 | 103 |
| 80 (92) | 5600 | 20x26.5 | 2 | 770 | 103 |
| 100 (115) | 5600 | 22x26.5 | 2 | 770 | 103 |
Part Numbering System
The AiSHi part numbering system for Electrolytic Capacitors is structured as follows:
- Category Code
- Series Code
- Size Code
- Voltage Code
- Capacitance Code
- Capacitance Tolerance Code
- Terminal Code
- Sleeve Marking Code
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec.
- Cooling: (1-3C)/sec. (max.)
- Soldering: Approx. 260C, <1 sec.
Reflow Soldering (Polymer SMD Type)
- Recommended Reflow Profile: See diagram for T1, T2, T3, t1, t2, t3 specifications.
- Preheating: 150C to 180C, within 90 sec.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3 - 10mm: Peak temperature 230-250C, duration over 200C 90 sec (for 6.3) or 60 sec (for 10), duration over T.C 40 sec (for 6.3) or 30 sec (for 10). Preheat at 100C to 200C for max 180 sec.
- Case size: 12.5 - 18mm: Peak temperature 230C, duration over 200C 90 sec, duration over T.C 40 sec. Preheat at 100C to 180C for max 150 sec.
Lead Forming Specifications
| Code | Fig. | Range (D) | F (Lead-to-lead distance) | L (Length) |
|---|---|---|---|---|
| C | Fig. 1 & 2 | 4 - 18 | 1.5 - 7.5 mm | 3.0 - 12.0 mm |
| F | Fig. 3 | 4 - 8 | 5.0 mm | 3.5, 4.5, 5.0, 7.0 mm |
| J | Fig. 4 | 10 - 18 | 5.0 mm | 4.0, 4.5, 5.0 mm |
2409272202_AISHI-SPZ1EM101E08O00RAXXX_C119026.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
