<
>
Specifications
Voltage Rating:
10V
Capacitance:
220uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
2.5mm
Equivalent Series Resistance(ESR):
25mΩ@100kHz
Height - Seated (Max):
5mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
2.8A@100kHz
Diameter:
6.3mm
Mfr. Part #:
SPZ1AM221E05O00R
Model Number:
SPZ1AM221E05O00R
Package:
Through Hole,D6.3xL5mm
Key Attributes
Product Description
AISHi PZ Series Conductive Polymer Aluminum Electrolytic Capacitors
The AISHi PZ series offers conductive polymer aluminum electrolytic capacitors designed for demanding applications. These capacitors feature low ESR and are RoHS compliant and lead-free. They are suitable for use in system boards, display cards, small chargers, and intelligent TVs.
Product Attributes
- Brand: AISHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitor
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification |
|---|---|
| Category Code | E (Electrolytic Capacitor) |
| Type Code | PZ (Conductive Polymer) |
| Temperature Range | -55 to +105C |
| Rated Voltage Range | 6.3 to 100Vdc |
| Nominal Capacitance Range | 4.7 to 5600F |
| Capacitance Tolerance | 20% (M) |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) |
| Dissipation Factor (tan) | See table for values (at 20C, 120Hz) |
| ESR | See table for values (100~300kHz, 20C) |
| Temperature Characteristics (Impedance Ratio at 100kHz) | Z(+105C)/Z(+20C) 1.25; Z(-55C)/Z(+20C) 1.25 |
| Endurance | 2,000 hours at +105C |
| Humidity Test | Subject to 90%-95% RH for 2,000 hours at 60C without voltage applied |
| Surge Test | Subject to 1,000 cycles of charge/discharge |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV |
Standard Ratings Table (Partial)
| VDC (V) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 110 | 300 | 72 |
| 6.3 (7.2) | 270 | 6.3x9.5 | 90 | 360 | 82 |
| 6.3 (7.2) | 330 | 6.3x11.5 | 75 | 420 | 94 |
| 6.3 (7.2) | 390 | 8x9.5 | 75 | 420 | 94 |
| 6.3 (7.2) | 470 | 8x11.5 | 60 | 500 | 104 |
| 6.3 (7.2) | 560 | 8x13 | 55 | 540 | 110 |
| 6.3 (7.2) | 680 | 10x12.5 | 45 | 600 | 120 |
| 6.3 (7.2) | 820 | 10x15 | 40 | 650 | 130 |
| 10 (11.5) | 220 | 6.3x7.2 | 110 | 300 | 46 |
| 10 (11.5) | 470 | 8x11.5 | 60 | 500 | 70 |
| 10 (11.5) | 820 | 10x12.5 | 45 | 600 | 90 |
| 16 (18.4) | 100 | 6.3x7.2 | 110 | 300 | 29 |
| 16 (18.4) | 220 | 8x9.5 | 75 | 420 | 46 |
| 16 (18.4) | 470 | 10x12.5 | 45 | 600 | 70 |
| 20 (23) | 100 | 6.3x7.2 | 110 | 300 | 25 |
| 20 (23) | 220 | 8x9.5 | 75 | 420 | 40 |
| 20 (23) | 330 | 8x11.5 | 60 | 500 | 50 |
| 20 (23) | 470 | 10x12.5 | 45 | 600 | 60 |
| 25 (29) | 100 | 6.3x7.2 | 110 | 300 | 22 |
| 25 (29) | 220 | 8x9.5 | 75 | 420 | 35 |
| 25 (29) | 330 | 8x11.5 | 60 | 500 | 44 |
| 25 (29) | 470 | 10x12.5 | 45 | 600 | 54 |
| 35 (41) | 47 | 6.3x7.2 | 110 | 300 | 15 |
| 35 (41) | 100 | 8x9.5 | 75 | 420 | 25 |
| 35 (41) | 150 | 8x11.5 | 60 | 500 | 31 |
| 35 (41) | 220 | 10x12.5 | 45 | 600 | 37 |
| 35 (41) | 330 | 10x15 | 40 | 650 | 45 |
| 35 (41) | 470 | 12.5x13 | 35 | 700 | 54 |
| 35 (41) | 680 | 12.5x16 | 30 | 750 | 65 |
| 50 (58) | 47 | 6.3x7.2 | 110 | 300 | 12 |
| 50 (58) | 100 | 8x9.5 | 75 | 420 | 20 |
| 50 (58) | 150 | 8x11.5 | 60 | 500 | 25 |
| 50 (58) | 220 | 10x12.5 | 45 | 600 | 30 |
| 50 (58) | 330 | 10x15 | 40 | 650 | 35 |
| 50 (58) | 470 | 12.5x13 | 35 | 700 | 42 |
| 50 (58) | 680 | 12.5x16 | 30 | 750 | 50 |
| 63 (73) | 33 | 6.3x7.2 | 110 | 300 | 10 |
| 63 (73) | 68 | 8x9.5 | 75 | 420 | 17 |
| 63 (73) | 100 | 8x11.5 | 60 | 500 | 21 |
| 63 (73) | 150 | 10x12.5 | 45 | 600 | 25 |
| 63 (73) | 220 | 10x15 | 40 | 650 | 30 |
| 63 (73) | 330 | 12.5x13 | 35 | 700 | 35 |
| 63 (73) | 470 | 12.5x16 | 30 | 750 | 42 |
| 80 (92) | 33 | 6.3x7.2 | 110 | 300 | 8 |
| 80 (92) | 68 | 8x9.5 | 75 | 420 | 14 |
| 80 (92) | 100 | 8x11.5 | 60 | 500 | 17 |
| 80 (92) | 150 | 10x12.5 | 45 | 600 | 20 |
| 80 (92) | 220 | 10x15 | 40 | 650 | 24 |
| 80 (92) | 330 | 12.5x13 | 35 | 700 | 28 |
| 100 (115) | 22 | 6.3x7.2 | 110 | 300 | 7 |
| 100 (115) | 47 | 8x9.5 | 75 | 420 | 12 |
| 100 (115) | 68 | 8x11.5 | 60 | 500 | 14 |
| 100 (115) | 100 | 10x12.5 | 45 | 600 | 17 |
| 100 (115) | 150 | 10x15 | 40 | 650 | 20 |
| 100 (115) | 220 | 12.5x13 | 35 | 700 | 24 |
Part Numbering System
The part numbering system follows the structure: Category Code - Series Code - Size Code - Capacitance Code - Capacitance Tolerance Code - Voltage Code - Terminal Code - Sleeve Marking Code.
Example: CD11GE G E (This is a partial example and requires full code definitions for a complete part number).
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C, 30-90 sec.
- Cooling: (1-3C)/sec. (Note 1)
- Soldering Temperature: Approx. 260C max.
- Soldering Time: <1 sec.
- Note 1: Cooling rate.
Reflow Soldering (Polymer SMD Type)
- Recommended Reflow Profile: See diagram in source document.
- Preheating: 150C to 180C, Within 90 sec.
- Peak Temperature (T1): 230C (max. 5 sec.)
- Time above 200C (t): 40 sec. (max.) for C6.3 case size.
- Time above T.C (t1): 90 sec. (max.) for C6.3 case size.
- T.C: 230C for C6.3 case size.
Reflow Soldering (Liquid SMD Type)
- Case size: 6.3 - 10mm
- Preheat: 100C to 200C, Maximum 180 seconds.
- Peak temperature (T.C): 230C (max. 5 sec.)
- Time above 200C (t): 90 sec. (max.) for C6.3 case size.
- Time above T.C (t1): 40 sec. (max.) for C6.3 case size.
- Case size: 12.5 - 18mm
- Preheat: 100C to 180C, Maximum 150 seconds.
- Peak temperature (T.C): 230C (max. 5 sec.)
- Time above 200C (t): 60 sec. (max.) for C12.5 case size.
- Time above T.C (t1): 30 sec. (max.) for C12.5 case size.
2409272202_AISHI-SPZ1AM221E05O00R_C122610.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
