<
>
Specifications
Voltage Rating:
6.3V
Capacitance:
1000uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Height - Seated (Max):
10mm
Diameter:
6.3mm
Operating Temperature:
-55℃~+105℃
Mfr. Part #:
SPZ0JM102E10C35RAXXX
Model Number:
SPZ0JM102E10C35RAXXX
Package:
Through Hole,D6.3xL10mm
Key Attributes
Product Description
Product Overview
The AISHI PZ series Aluminum Solid Electrolytic Capacitors with Conductive Polymer Electrolyte are designed for stable operation within a specified temperature range at rated voltage. These capacitors are suitable for various applications where reliable electrical performance is crucial. Key features include a wide operating temperature range, stable characteristics under different temperature conditions, and robust endurance performance.
Product Attributes
- Brand: AISHI
- Series: PZ
- Product Type: Aluminum Solid Electrolytic Capacitors with Conductive Polymer Electrolyte
- Marking Ink Color: Red
Technical Specifications
| AISHI P/N | Rated Work Voltage (V.DC) | Nominal Capacitance 120Hz, 20 (F) | Capacitance Tolerance (%) | Oper Temp () | Nominal Case Size D*L (mm) | E.S.R 100KHz, 20 (m max) | Max Leakage Current 20 (A max) | D.F 120Hz, 20 (%max) | Ripple Current 100KHz, 105 (mA.rms) | Load Life (Hours) |
|---|---|---|---|---|---|---|---|---|---|---|
| SPZ0JM102E10O00RAXXX | 6.3 | 1000 | -20~+20 | 105 | 6.3*10 | 10 | 1260 | 8 | 5100 | 2000 |
General Specifications
| Specification | Details |
|---|---|
| Operating Temperature Range | Ambient temperature at which the capacitor can be operated continuously at rated voltage. |
| Standard Measurement Conditions | Ambient temperature: 15 to 35, Air pressure: 86kpa to 106kpa |
| Measurement Limits for Doubtful Results | Ambient temperature: 202, Air pressure: 86kpa to 106kpa |
| Impedance at High and Low Temperature (100kHz) | Z (-55) / Z (+20) 1.25, Z (105) / Z (+20) 1.25 |
| Load Life Test | 2000 hours at 1052 with DC rated working voltage. Capacitance change within 20%, tan 150% of initial specified value, ESR 150% of initial specified value, Leakage current larger of 0.2CV or 500A. |
| Resistance to Vibration | Complies with JIS C 5102 8.2 and JIS C 5025. Frequency: 10 to 55Hz, Amplitude: 0.75mm. Capacitance change within 5% of initial value. |
| Solder Ability | Temperature: 235 5 C, Duration: 2 0.5 seconds. At least 95% surface area covered with new solder. |
| Resistance to Soldering Heat | Solder bath: 260 5C for 10 1 seconds. Soldering iron: 400 10 C for 3+ 1/-0 seconds. Capacitance change within 5% of initial value. |
| Resistance to Damp Heat (Steady State) | 602, 90% ~ 95% RH for 2000 hrs without load. Capacitance change within 20%, tan 150% of initial specified value. |
| Rapid Change of Temperature | 10 cycles. Capacitance change within 10% of initial capacitance. tan initial specified value. |
| Surge Voltage Test | 1000 cycles of rated surge voltage applied for 30s and discharged for 5min30s. Leakage current larger of 0.2CV or 500A. Capacitance change within 20% of initial value. |
| Terminal Strength | Tensile and bending strength tests as per specified loads. No intermittent contacts, over LC, open or short-circuiting. |
| Polarity | Solid aluminum electrolytic capacitor with positive and negative electrodes. Reverse polarity is prohibited. |
| Prohibited Circuits | High impedance, coupling, time constant, series connection for higher withstand voltage, and circuits sensitive to large leakage current. |
| Over Voltage | Exceeding rated voltage is prohibited, even for an instant. |
| Rapid Charge and Discharge | Unsuitable. Protection circuit recommended if instantaneous current exceeds 10A or 10 times allowable ripple current. |
| Soldering Considerations | Conditions must be within specified range to avoid leakage current increase and capacitance reduction. |
| Storage Conditions | Temperature: 5 to 35 (or 35 to 85 for < 3 months), Relative humidity: 75%, no direct sunshine. Avoid water, brine, oil, condensation, poisonous gases, UV, and radiation. Before unseal: within 1 year after delivery. After seal: within 1 month from opening. Products stored over 3 years should be discarded. |
| Cleaning | Various solvents and methods are confirmed under maker's recommendation (e.g., HCFC, higher alcohol system, petroleum system, etc.). |
| Failure Mode | Mainly short circuit due to conductive polymer. Overheating and case removal may occur in case of short circuit. |
Part Number System
| Code | Description |
|---|---|
| 7.1 | Category Code (S: Solid Capacitor) |
| 7.2 | Series Code (PZ) |
| 7.3 | Voltage Code (e.g., 0J for 6.3V) |
| 7.4 | Capacitance Tolerance Code (M: -20% ~ +20%) |
| 7.5 | Capacitance Code (e.g., 102 for 1000F) |
| 7.6 | Size Code (e.g., E10 for 6.3*10mm) |
| 7.7 | Terminal Code (e.g., O00: Platform rubber& Inbulk, C35: Platform rubber & Lead Cut3.5 0.5mm) |
| 7.8 | Marking Code (S: Sky blue, R: Red) |
| 7.9 | Special Code (AXXX: Normal products) |
Marking
Year Code (e.g., C for 2020), Week Code, Series (PZ), Rated Capacitance (1000), Rated Voltage (6.3), Polarity indication.
Packing
Packing label includes Series, P/N, Rated Capacitance, Rated Voltage, Quantity, Size, LOT Number. Bulk packing available for Standard and Cutting types with specified quantities per bag, inner box, and outer carton.
2301061809_AISHI-SPZ0JM102E10C35RAXXX_C5349927.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
