<
>
Specifications
Voltage Rating:
35V
Capacitance:
220uF
Lifetime:
2000hrs@105℃
Tolerance:
±20%
Pin Spacing:
2.5mm
Equivalent Series Resistance(ESR):
30mΩ@100kHz
Height - Seated (Max):
12mm
Operating Temperature:
-55℃~+105℃
Ripple Current:
2.7A@100kHz
Diameter:
6.3mm
Mfr. Part #:
SPZ1VM221E12O00RAXXX
Model Number:
SPZ1VM221E12O00RAXXX
Package:
Through Hole,D6.3xL12mm
Key Attributes
Product Description
Product Overview
The AiSHi PZ series conductive polymer aluminum electrolytic capacitors are designed for high-performance applications requiring low ESR and long endurance. These RoHS compliant and lead-free capacitors are suitable for system boards, display cards, small chargers, and intelligent TVs, offering reliable operation from -55C to +105C.
Product Attributes
- Brand: AiSHi
- Series: PZ
- Type: Conductive Polymer Aluminum Electrolytic Capacitors
- Compliance: RoHS Compliant, Lead-free
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Category Code | E | Electrolytic Capacitor |
| Type Code | PZ | Conductive Polymer |
| Temperature Range | -55C to +105C | |
| Rated Voltage Range | 6.3Vdc to 100Vdc | |
| Nominal Capacitance Range | 4.7F to 5600F | |
| Capacitance Tolerance | 20% (M) | |
| DC Leakage Current | 0.2CV or 500A, whichever is greater (at 20C, 120Hz) | (after 2 minutes) |
| Dissipation Factor (tan) | See table for values (at 20C, 120Hz) | |
| ESR | See table for values (100kHz-300kHz, 20C) | |
| Temperature Characteristics (Impedance Ratio) | Z(+105C)/Z(+20C) 1.25 | (at 100kHz) |
| Temperature Characteristics (Impedance Ratio) | Z(-55C)/Z(+20C) 1.25 | (at 100kHz) |
| Endurance | 2,000 hours at +105C | Capacitance Change: 20% of initial value; D.F. (tan): 150% of initial specified value; ESR: 150% of initial specified value; Leakage Current: initial specified value. |
| Humidity Test | 2,000 hours at 60C, 90%-95% RH (without voltage) | Meets Endurance characteristics. |
| Surge Test | 1,000 cycles | Meets Appearance, Capacitance Change (20%), D.F. (tan) ( 150%), ESR ( 150%), and Leakage Current ( initial specified value) requirements. |
| Recommended Applications | System Board, Display Card, Small Charger, Intelligent TV | |
| Part Numbering System | Category Code, Series Code, Size Code, Capacitance Code, Capacitance Tolerance Code, Voltage Code, Terminal Code, Sleeve Marking Code |
Standard Ratings (Example)
| VDC (V) | Cap (F) | Size DxL(mm) | ESR (m, 20C, 100kHz)(max.) | Rated ripple current (mArms/105C, 100kHz) | Leakage Current (A)(max.) |
|---|---|---|---|---|---|
| 6.3 (7.2) | 220 | 6.3x7.2 | 35 | 150 | 66 |
| 6.3 (7.2) | 270 | 6.3x7.2 | 30 | 165 | 72 |
| 6.3 (7.2) | 330 | 6.3x7.2 | 25 | 180 | 81 |
| 6.3 (7.2) | 390 | 6.3x7.2 | 22 | 195 | 87 |
| 6.3 (7.2) | 470 | 6.3x7.2 | 20 | 210 | 93 |
| 6.3 (7.2) | 560 | 6.3x7.2 | 18 | 225 | 99 |
| 6.3 (7.2) | 680 | 6.3x7.2 | 15 | 240 | 105 |
| 10 (11.5) | 470 | 10x12 | 15 | 210 | 93 |
| 10 (11.5) | 680 | 10x12 | 12 | 240 | 105 |
| 10 (11.5) | 820 | 10x12 | 10 | 260 | 111 |
| 12 (13.8) | 470 | 10x12 | 15 | 210 | 93 |
| 12 (13.8) | 680 | 10x12 | 12 | 240 | 105 |
| 12 (13.8) | 820 | 10x12 | 10 | 260 | 111 |
| 16 (18.4) | 470 | 10x12 | 15 | 210 | 93 |
| 16 (18.4) | 680 | 10x12 | 12 | 240 | 105 |
| 16 (18.4) | 820 | 10x12 | 10 | 260 | 111 |
| 20 (23) | 330 | 10x12 | 15 | 180 | 81 |
| 20 (23) | 470 | 10x12 | 12 | 210 | 93 |
| 20 (23) | 560 | 10x12 | 10 | 225 | 99 |
| 25 (29) | 330 | 10x12 | 15 | 180 | 81 |
| 25 (29) | 470 | 10x12 | 12 | 210 | 93 |
| 25 (29) | 560 | 10x12 | 10 | 225 | 99 |
| 35 (41) | 220 | 10x12 | 20 | 150 | 66 |
| 35 (41) | 270 | 10x12 | 18 | 165 | 72 |
| 35 (41) | 330 | 10x12 | 15 | 180 | 81 |
| 35 (41) | 390 | 10x12 | 12 | 195 | 87 |
| 35 (41) | 470 | 10x12 | 10 | 210 | 93 |
| 35 (41) | 560 | 10x12 | 8 | 225 | 99 |
| 50 (58) | 150 | 10x12 | 25 | 120 | 54 |
| 50 (58) | 220 | 10x12 | 18 | 150 | 66 |
| 50 (58) | 270 | 10x12 | 15 | 165 | 72 |
| 50 (58) | 330 | 10x12 | 12 | 180 | 81 |
| 50 (58) | 390 | 10x12 | 10 | 195 | 87 |
| 50 (58) | 470 | 10x12 | 8 | 210 | 93 |
| 63 (73) | 100 | 10x12 | 30 | 100 | 48 |
| 63 (73) | 150 | 10x12 | 25 | 120 | 54 |
| 63 (73) | 220 | 10x12 | 18 | 150 | 66 |
| 63 (73) | 270 | 10x12 | 15 | 165 | 72 |
| 63 (73) | 330 | 10x12 | 12 | 180 | 81 |
| 63 (73) | 390 | 10x12 | 10 | 195 | 87 |
| 80 (92) | 100 | 10x12 | 30 | 100 | 48 |
| 80 (92) | 150 | 10x12 | 25 | 120 | 54 |
| 80 (92) | 220 | 10x12 | 18 | 150 | 66 |
| 80 (92) | 270 | 10x12 | 15 | 165 | 72 |
| 80 (92) | 330 | 10x12 | 12 | 180 | 81 |
| 100 (115) | 100 | 10x12 | 30 | 100 | 48 |
| 100 (115) | 150 | 10x12 | 25 | 120 | 54 |
| 100 (115) | 220 | 10x12 | 18 | 150 | 66 |
| 100 (115) | 270 | 10x12 | 15 | 165 | 72 |
| 100 (115) | 330 | 10x12 | 12 | 180 | 81 |
Soldering Recommendations
Flow Soldering (Radial Lead Type)
- Preheating: 13020C (30-90 sec)
- Cooling: Approx. 200C/sec (max <1 sec)
- Soldering Temperature: 260C max
- Soldering Time: 100.5 sec
Reflow Soldering (Polymer SMD Type)
Recommended Reflow Profile:
- Preheating: 150C to 180C (Within 90 sec)
- Peak Temperature (T1): 230C - 260C (0.1-1 sec)
- Cooling: 180C to 100C (Max 1.5C/sec)
Reflow Soldering (Liquid SMD Type)
- Case Size: 6.3mm - 10mm
- Preheat: 100C to 200C (Max 180 sec)
- Peak Temperature (T1): 230C - 250C (Max 5 sec)
- Temperature over 200C (t): Max 90 sec (6.3mm), Max 60 sec (8mm, 10mm)
- Temperature over T.C (t1): Max 40 sec (6.3mm), Max 30 sec (8mm, 10mm)
- Case Size: 12.5mm - 18mm
- Preheat: 100C to 180C (Max 150 sec)
- Peak Temperature (T1): 230C - 250C (Max 5 sec)
- Temperature over 200C (t): Max 90 sec (12.5mm, 16mm), Max 60 sec (18mm)
- Temperature over T.C (t1): Max 40 sec (12.5mm, 16mm), Max 30 sec (18mm)
Lead Forming & Cut Specifications
| Code | Range | F (mm) | L (mm) |
|---|---|---|---|
| C | 4-18 | 1.5 - 7.5 | 3.0 - 12.0 |
| F | 4-8 | 5.0 | 3.5, 4.5, 5.0, 7.0 |
| J | 10-18 | 5.0 - 7.5 | 4.0 - 5.0 |
Lead Forming & Taping Specifications
| Figure | Code | Body Size (DxLmm) | Lead Wire Diameter (d 0.05) | Pitch of Body (P 1.0) | Feed Hole Pitch (PO 0.2) | Distance from hole center to lead (P1 0.7) | Distance from feed hole center to body center (P2 1.0) | Lead-to-lead distance (F 0.5) | Height of body from tape center (H 0.75) | Base tape width (W 0.5) | Adhesive tape width (WO min) | Hole position (W1 +0.75/-0.5) | Hole down tape position (W2 max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fig.1 & Fig.2 & Fig.3 | B | 4x5, 5x5, 5x7, 6.3x5, 6.3x7, 6.3x11, 8x9/11, 8x16, 10x12.5 | 0.45 - 0.6 | 12.7 | 12.7 | 3.85 - 5.1 | 6.35 | 2.5 - 5.0 | 18.5 | 18.0 | 6.0 - 11.0 | 9.0 | 3.0 |
| Fig.4 | P | 4x5, 5x5, 5x7, 5x11, 6.3x5, 6.3x7, 6.3x11, 8x9/11, 8x16 | 0.45 - 0.6 | 12.7 | 12.7 | 3.85 | 6.35 | 1.5 - 3.5 | 18.5 | 18.0 | 6.0 - 8.0 | 9.0 | 3.0 |
2409272202_AISHI-SPZ1VM221E12O00RAXXX_C171433.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
