<
>
Specifications
Voltage Rating:
10V
Capacitance:
47uF
Temperature Coefficient:
X5R
Tolerance:
±20%
Mfr. Part #:
0805X5R476M100NT
Model Number:
0805X5R476M100NT
Package:
0805
Key Attributes
Product Description
Product Description
This product is a high-voltage Multilayer Ceramic Capacitor (MLCC) designed for various high-voltage circuit applications. It is suitable for coupling, wave filtering, and resonant functions in power supplies, chargers, networking interfaces, and lighting systems. The MLCCs are available in various standard package sizes and temperature characteristics, offering reliable performance in demanding electrical environments.
Product Attributes
- Material: Ceramic dielectric, inner and outer electrodes (Au/Ag-Ni-Sn terminal composition)
- Packing Options: Tape/Reel (T), Bag packing (P)
Technical Specifications
| Item | Specification/Requirement | Testing Method |
|---|---|---|
| Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |
| Nominal Electrostatic Capacity | 8R08.0, 10010, 101100 (pF) | |
| Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |
| Rated Voltage (DC) | 25025, 251250, 2522500 (V) | |
| Terminal Composition | Au/Ag-Ni-Sn (From the inside out) | |
| Temperature Range | -55~+125 | Naked eye (Visual inspection) |
| Visual/Dimension | 1, No Damage 2, Dimension meet Spec | Digital calliper |
| Static Capacity (NPO) | 1000pF: 1MHz10%, 1.00.2Vrms; >1000pF: 1KHz10%, 1.00.2Vrms | |
| Static Capacity (X7R/X7T/X7P) | 10uF: 1KHz10%, 1.00.2Vrms; >10uF: 120Hz24, 0.50.1Vrms | |
| Dissipation Factor (DF) (NPO) | DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr) | Cr1000pF, 110%MHz, 1V0.2rms; Cr1000pF, 110%KHz, 1V0.2rms |
| Dissipation Factor (DF) (X7R/X7T/X7P) | See Note 1 | Cr10uF, 110%KHz, 1V0.1rms; Cr10uF, 12024Hz, 0.5V0.1rms |
| Insulation Resistance (IR) (NPO) | IR50000M, C10nF; IR*Cr500S, C10nF | Rated voltage, Time:605s, Humidity:75%, Temperature:255, Current:50mA |
| Insulation Resistance (IR) (X7R/X7T/X7P) | IR10000M, C25nF; IR*Cr100S, C25nF | Rated voltage, Time:605s, Humidity:75%, Temperature:255, Current:50mA |
| Hi-pot (DC) | Ur=100V,...2.5 x rated voltage; Ur=200V/250V,...2.0 x rated voltage; Ur=450/500/630V,1.5 x rated voltage; 1KVUr2KV, 1.2 x rated voltage; 2KVUr, 1.1 x rated voltage | Voltage Raising time:110S, Voltage maintaining time2S |
| Solderability | Soldering area90% | Pre-heating 80-120, time 10-30s, lead free solder, flux; Soldering 2455, time 20.5s |
| Resistance to the heat of soldering | Visual-No damage, soldering area90% | Pre-heating 100-200, time 102s, soldering 2655, time 51s. Cleaning with solvent. Room temperature, time: 242 hours. |
| Electrostatic Capacity Change Rate (Post-Soldering) | NPO: 0.5% or 0.5pF; X7R: 15%; X7T: -33% to 22%; X7P: 10% | DF Refer to NO#4, IR Refer to NO#5 |
| Flexural Strength | Electro static capacity change rate C/C10% | Base board: Al2O3 /PCB, PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm, Flexural depth: 1mm, Bend speed: 0.5mm/sec. Test under flexural status. |
| Terminal Bonding Strength | No visual damage | Applied Force: 5N, Duration: 101S |
| Thermal Shock | NPO: C/C2.5% or 0.25pF; X7R/X7P: C/C0.5%; X7T: C/C10% | Pre-condition (X7R characteristic): Upper limit temperature 1hour, place 241 hours, start testing. Run 5 cycles. Test after 242 hours normal temp & humidity. |
| Temperature Moisture Exposure | Capacity Change Rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C10%; DF 2 times initial standard; IR (NPO): IR2500M or IR*Cr25S; IR (X7R/X7T/X7P): IR1000M or IR*Cr25S | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after 242 hours normal temp & humidity. |
| High Temperature Exposure | Capacity Change Rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C20%; DF 2 X initial standard; IR (NPO): IR4000M or IR*Cr40S; IR (X7R/X7T/X7P): IR2000M or IR*Cr50S | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after 48 hours normal pressure & temperature. |
| PCB Flexural Strength | No crack and other defect | Soldering MLCC on PCB, then pressing direction based on photo. |
Dimensions and Packaging
| Part Number Code | Dimension (mm) L*W | Dimension (inch) L*W | Tape Size (Embossed) | Paper Tape Size |
|---|---|---|---|---|
| 0201 | 0.50*0.25 | 0.02*0.01 | 0.370.10 x 0.670.10 (W1 x L1) | |
| 0402 | 1.00*0.50 | 0.04*0.02 | 0.650.10 x 1.150.10 (W1 x L1) | |
| 0603 | 1.60*0.80 | 0.06*0.03 | 1.550.20 x 2.350.20 (A x B) | 1.100.10 x 1.900.10 (A x B) |
| 0805 | 2.00*1.25 | 0.08*0.05 | 1.550.20 x 2.350.20 (A x B) | 1.450.15 x 2.300.15 (A x B) |
| 1206 | 3.20*1.60 | 0.12*0.06 | 1.950.20 x 3.600.20 (A x B) | 1.800.20 x 3.400.20 (A x B) |
| 1210 | 3.20*2.50 | 0.12*0.10 | 2.700.10 x 3.420.10 (A x B) | |
| 1808 | 4.50*2.00 | 0.18*0.08 | 2.200.10 x 4.950.10 (A x B) | |
| 1812 | 4.50*3.20 | 0.18*0.12 | 3.660.10 x 4.950.10 (A x B) | |
| 1825 | 4.50*6.30 | 0.18*0.25 | ||
| 2211 | 5.70*2.8 | 0.22*0.11 | ||
| 2220 | 5.70*5.00 | 0.22*0.11 | ||
| 2225 | 5.70*6.30 | 0.22*0.25 |
2509251626_AIDE-CAPACITOR-0805X5R476M100NT_C49326689.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
