<
>
Specifications
Voltage Rating:
1kV
Capacitance:
1nF
Temperature Coefficient:
C0G
Tolerance:
±5%
Mfr. Part #:
1206C0G102J102NT
Model Number:
1206C0G102J102NT
Package:
1206
Key Attributes
Product Description
Product Overview
This specification covers Medium and High voltage MLCCs designed for high-voltage applications. They are suitable for coupling, wave filtering, and resonant functions in various power supply and networking circuits.
Product Attributes
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- Packing: T (Tape/Reel), P (Bag packing)
Technical Specifications
| Item | Specification/Requirement | Testing Method |
| Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |
| Nominal Electrostatic Capacity | 8R0=8.0pF, 100=10pF, 101=100pF | |
| Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |
| Rated Voltage (DC) | 250V, 251=250V, 252=2500V | |
| Temperature Range | -55~+125 | |
| Static Capacity | NPO: 1000pF @ 1MHz10%, 1.00.2Vrms; >1000pF @ 1KHz10%, 1.00.2Vrms X7R/X7T/X7P: 10uF @ 1KHz10%, 1.00.2Vrms; >10uF @ 120Hz24, 0.50.1Vrms | |
| Dissipation Factor (DF) | NPO: DF0.56 (Cr5pF); DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15% (50pFCr) X7R/X7T/X7P: See Note 1 | Cr1000pF, 110%MHz, 1V0.2rms; Cr1000pF, 110%KHz, 1V0.2rms Cr10uF, 110%KHz, 1V0.1rms; Cr10uF, 12024Hz, 0.5V0.1rms |
| Insulation Resistance (IR) | NPO: IR50000M (C10nF), IR*Cr500S (C10nF) X7R/X7T/X7P: IR10000M (C25nF), IR*Cr100S (C25nF) | Rated voltage, Time:605s, Humidity:75%, Temperature:255, Current:50mA |
| Hi-pot (DC) | Ur=100V, 2.5x rated voltage Ur=200V/250V, 2.0x rated voltage Ur=450/500/630V, 1.5x rated voltage 1KVUr2KV, 1.2x rated voltage 2KVUr, 1.1x rated voltage | Voltage Raising time:110S, Voltage maintaining time2S |
| Solderability | Soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux; Soldering temperature 2455, Solder time 20.5s |
| Resistance to the heat of soldering | Visual-No damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature:2655, Soldering time:51s. Cleaning with solvent. Room temperature, time:242 hours. |
| Electrostatic capacity change rate | NPO: C/C0.5% or 0.5pF X7R: C/C15% X7T: -33% C/C22% X7P: C/C10% | Pre-heating 150 for 1 hour, then place 48 hours under normal pressure & temperature. |
| Flexural strength | Electro static capacity change rate C/C10% | Base board: Al2O3 /PCB; PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm; Flexural depth: 1mm; Bend speed: 0.5mm/sec. |
| Terminal bonding strength | No visual damage | Applied Force: 5N, Duration: 101S |
| Thermal shock | NPO: C/C2.5% or 0.25pF X7R/X7P: C/C0.5% X7T: C/C10% | Pre-condition (X7R characteristic): Upper limit temperature 1 hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test after placing 242 hours at normal temp & humidity. |
| Temperature moisture exposure | Capacity change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C10% DF 2 times initial standard IR: NPO: IR2500M or IR*Cr25S; X7R/X7T/X7P: IR1000M or IR*Cr25S | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after placing 242 hours at normal temp & humidity. |
| High temperature exposure | Capacity change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C20% DF 2 X initial standard IR: NPO: IR4000M or IR*Cr40S; X7R/X7T/X7P: IR2000M or IR*Cr50S | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after placing 48 hours under normal pressure & temperature. |
| PCB flexural strength | No crack and other defect | IR Soldering the MLCC on the PCB, then pressing direction based on the photo. |
2509251626_AIDE-CAPACITOR-1206C0G102J102NT_C49326725.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
