86--15347289033
feliciazhou@pa.ecer.com
Online Service

Online Service

Contact Person
feliciazhou@pa.ecer.com
8615347289033
+86 136 6733 2386
quality AIDE CAPACITOR 0603X7R102K250NT MLCC designed for AC DC DC DC power chargers and energy saving lamp power supplies factory
<
quality AIDE CAPACITOR 0603X7R102K250NT MLCC designed for AC DC DC DC power chargers and energy saving lamp power supplies factory
>
Specifications
Voltage Rating:
25V
Capacitance:
1nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0603X7R102K250NT
Model Number:
0603X7R102K250NT
Package:
0603
Key Attributes
Product Description

Product Overview

This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and electronic circuits. Applications include switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. These MLCCs are available in medium and high voltage ratings.

Product Attributes

  • Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
  • RoHS/REACH Compliance: Meets RoHS and REACH standards.

Technical Specifications

Item Description Specification
Application Field Coupling, wave filtering, resonant in high voltage circuits
Switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC)
Testing Conditions
Normal Condition Temperature 15~35
Humidity 45~75%RH
Normal atmosphere 86~106kPa
Relative Condition Temperature 252
Humidity 60~70%RH
Atmosphere 86~106kPa
Part Number Description Example: 1812 X7R 684 M 251 N T
Item Description Details
1. Dimension Code Size 0201 (0.02*0.01 inch / 0.50*0.25 mm), 0402 (0.04*0.02 inch / 1.00*0.50 mm), 0603 (0.06*0.03 inch / 1.60*0.80 mm), 0805 (0.08*0.05 inch / 2.00*1.25 mm), 1206 (0.12*0.06 inch / 3.20*1.60 mm), 1210 (0.12*0.10 inch / 3.20*2.50 mm), 1808 (0.18*0.08 inch / 4.50*2.00 mm), 1812 (0.18*0.12 inch / 4.50*3.20 mm), 1825 (0.18*0.25 inch / 4.50*6.30 mm), 2211 (0.22*0.11 inch / 5.70*2.8 mm), 2225 (0.22*0.25 inch / 5.70*6.30 mm)
2. Temperature Characteristic Dielectric Type C0G (030 PPM/), X7R (15%), X5R (15%)
3. Nominal Electrostatic Capacity Capacity Value 8R08.0pF, 10010pF, 101100pF
4. Tolerance of Electrostatic Capacity Tolerance B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20%
5. Rated Voltage (DC) Voltage 25025V, 251 250V, 252 2500V
6. Terminal Composition Plating Au/Ag-Ni-Sn (From the inside out)
7. Packing Packaging Type T Tape/Reel, P Bag packing(PE)
Construction
Item Layer Description
1 Ceramic dielectric
2 Inner electrode
3 Outer electrode
4 Nickle layer
5 Tin layer
Dimension (mm)
Part number L W T WB
0201 (0603) 0.600.10 0.300.05 0.300.05 0.100.05
0402 (1005) 1.000.15 0.500.15 0.500.10 0.200.10
0603 (1608) 1.600.20 0.800.15 0.800.15 0.300.10
0805 (2012) 2.000.20 1.250.20 0.800.20 0.500.20
1206 (3216) 3.200.30 1.600.30 1.000.20 0.600.30
1210 (3225) 3.200.30 2.500.30 2.70 0.800.30
1808 (4520) 4.500.40 2.000.20 2.70 0.800.30
1812 (4532) 4.500.40 3.200.30 3.50 0.800.30
1825 (4563) 4.500.40 6.300.50 3.50 0.800.30
2220 (5750) 5.700.50 5.000.50 3.50 1.000.40
2225 (5763) 5.700.50 6.300.50 6.20 1.000.40
Specification and Testing Method
No Item Specification/Requirement Testing method
1 Temperature -55~+125
2 Visual/Dimension 1, No Damage; 2, Dimension meet Spec Naked eye (Visual inspection), Digital calliper
3 Static capacity Meet standard specification and tolerance
  • NPO characteristic: Capacity 1000pF 1MHz10%, 1.00.2Vrms; 1000pF 1KHz10%, 1.00.2Vrms
  • X7R/X7T/X7P characteristic: 10uF 1KHz10%, 1.00.2Vrms; 10uF 120Hz24, 0.50.1Vrms
4 Dissipation factor (DF)
  • NPO Characteristic: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr)
  • X7R/X7T/X7P characteristic: See Note 1
  • Cr1000pF, Testing frequency 110%MHz, Testing voltage 1V0.2rms
  • Cr1000pF, Testing frequency 110%KHz, Testing voltage 1V0.2rms.
  • Cr10uF, Test frequency 110%KHz, Voltage 1V0.1rms.
  • Cr10uF, Frequency 12024Hz, Voltage 0.5V0.1rms.
5 IR Insulation Resistance
  • NPO Characteristic: IR50000M, C10nF; IR*Cr500S, C10nF
  • X7R/X7T/X7P Characteristic: IR10000M, C25nF; IR*Cr100S, C25nF
 Testing condition: Rated voltage, Time:605s, Humidity:75%, Temperature:255, Current :50mA
6 Hi-pot (DC) No dielectric breakdown or damage
  • Ur=100V, 2.5 x rated voltage
  • Ur=200V/250V, 2.0 x rated voltage
  • Ur=450/500/630V, 1.5 x rated voltage
  • 1KVUr2KV, 1.2 x rated voltage
  • 2KVUr, 1.1 x rated voltage
Voltage Raising time: 110S, Voltage maintaining time2S
7 Solderability soldering area90% Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s
8 Resistance to the heat of soldering Visual-No damage, soldering area90% Pre-heating temperature 100-200, time 102 s, soldering temperature :2655, Soldering time:51s. Cleaning with solvent. Room temperature, time :242 hours.
9 Flexural strength No damage Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Test it under the flexural status. Electro static capacity change rate C/C10%. Flexural deepth 452.
10 Terminal bonding strength No visual damage Applied Force: 5N, Duration: 101S
11 Thermal shock
  • NPO Characteristic: C/C2.5% or 0.25pF (larger reading)
  • X7R/X7P- characteristic: C/C0.5%
  • X7T characteristic: C/C10%
 Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity.
12 Temperature moisture exposure
  • Visual: No visual damage
  • Electrost atic capacitance change rate: NPO characteristic: C/C2% or 1pF (larger reading); X7R/X7T/X7P characteristic: C/C10%
  • DF 2 times initial standard
  • IR: NPO characteristic: IR2500M or IR*Cr25S (Lower reading); X7R/X7T/X7P: IR1000M or IR*Cr25S (Lower reading)
 Temperature 402, Humidity 90~95%RH, time 50024 hours. Test it after place 242 hours normal temp & humidity.
13 High temperature exposure
  • Visual: No visual damage
  • Electrost atic capacitance change rate: NPO : C/C2% or 1pF (larger reading); X7R/X7T/X7P: C/C20%
  • DF 2 X initial standard
  • IR: NPO : IR4000M or IR*Cr40S (Lower reading); X7R/X7T/X7P : IR2000M or IR*Cr50S (Lower reading)
 Temperature 1253, Time 100048 hours. Voltage: 100VV250V 2x Rated voltage; 250VV1KV 1.5x rated voltage; 1KVV 1.2x rated voltage. Test it after place 48 hours under normal pressure & temperature.
14 PCB flexural strength No crack and other defect IR Soldering the MLCC on the PCB. Pressing direction base on the photo. SIZE A B C; 0805(2012) 1.2 4 1.65; 1206(3216) 2.2 5 2; 1210(3225) 2.2 5 2.9; 1812(4532) 3.5 7 3.7; 2220(5750) 4.5 8 5.6
Embossed Plastic Taping Dimensions (unit: mm)
Code Tape size A B C D E F G H J T
0805 1.55 0.20 2.35 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.50 Max
1206 1.95 0.20 3.60 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.1 1.50 -0/+0.10 1.85 Max
1210 2.70 0.10 3.42 0.10 8.00 0.10 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.05 4.00 0.10 1.55 -0/+0.10 3.2 Max
1808 2.20 0.10 4.95 0.10 12.00 0.10 5.50 0.05 1.75 0.10 4.00 0.10 2.00 0.05 4.00 0.10 1.50 -0/+0.10 3.0 Max
1812 3.66 0.10 4.95 0.10 12.00 0.10 5.50 0.05 1.75 0.10 8.00 0.10 2.00 0.05 4.00 0.10 1.55 -0/+0.10 4.0 Max
Paper Tape Reel Packing Dimensions (unit: mm)
Code Paper size W1 L1 D C B P1 P2 P0 d t
1005 0.240.02 0.450.02 8.000.10 3.500.05 1.750.10 2.000.05 2.000.05 4.000.10 1.50 -0/+0.10 0.30 Below
0201 0.370.10 0.670.10 8.000.10 3.500.05 1.750.10 2.000.05 2.000.05 4.000.10 1.50 -0/+0.10 0.80 Below
0402 0.650.10 1.150.10 8.000.10 3.500.05 1.750.10 2.000.05 2.000.05 4.000.10 1.50 -0/+0.10 0.80 Below
0603 1.10 0.10 1.90 0.10 8.00 0.10 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
0805 1.45 0.15 2.30 0.15 8.0 0.15 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
1206 1.80 0.20 3.40 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
Reel Dimensions (unit: mm)
Type A B C D E F G
7REEL 1782.0 3.0 130.5 210.5 21 or Bigger 1010.5 12max
13REEL 3302.0 3.0 130.5 210.5 21 or Bigger 1010.5 12max
Taping specification
Top tape peeling strength (a) Paper Taping Reel type: 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. (b) Embossed Taping Standard:
Packing quantity Dimension Paper T/R (Pcs) Plastic T/R (Pcs)
0603 4000
0805 4000 3000
1206 T1.35mm: 3000; T1.35mm: 2000
1210 T1.60mm: 3000; T1.60mm: 2000
1808 1000
1812 T1.85mm: 1000; T1.85mm: 800
1812 500
Precautions For Use The Multi-layer Ceramic Capacitors (MLCC) may fail in a short circuit modern in an open circuit mode when subjected to severe conditions of electrical environment and / or mechanical stress beyond the specified rating and specified conditions in the specification, which will result in burn out, flaming or glowing in the worst case. Following precautions for safety and Application Notes shall be taken in your major consideration. If you have a question about the precautions for handling, please contact our engineering section or factory.
  1. Soldering Profile: To avoid the crack problem by sudden temperature change, follow the temperature profile in the adjacent graph.
  2. Manual Soldering: Manual soldering can pose a great risk of creating thermal cracks in capacitors. The hot soldering iron tip comes into direct contact with the end terminations, and operators careless may cause the tip of the soldering iron to come into direct contact with the ceramic body of the capacitor. Therefore the soldering iron must be handled carefully, and pay much attention to the selection of the soldering iron tip and temperature contact of the tip.
  3. Optimum Solder Amount for Reflow Soldering
  4. Recommended Soldering amounts
Recommended Soldering Method
Size Temperature Characteristics Rated Voltage Capacitance Soldering Method
1005NPO//R
X7R/X5R/X7S/X6S//R
0201NPO//R
X7R/X5R/X7S/X6S//R
Y5V//R
0402NPO//R
X7R/X5R/X7S/X6S//R
Y5V//R
0603NPO//R/W
X7R/X5R/X7S/X6S/C1ufR
/C1ufR/W
Y5V/C1ufR
/C1ufR/W
0805NPO//R/W
X7R/X5R/X7S/X6S/C4.7ufR
/C4.7ufR/W
Y5V/C1ufR
/C1ufR/W
1206NPO//R/W
X7R/X5R/X7S/X6S/C10ufR
/C10ufR/W
Y5V/C10ufR
/C10ufR/W
1210NPO//R
X7R/X5R/X7S/X6S//R
Y5V//R
Soldering method: RReflow Soldering, WWave Soldering
The temperature profile for soldering While in preheating, please keep the temperature difference between soldering temperature and surface temperature of chips as: T150.

2509251626_AIDE-CAPACITOR-0603X7R102K250NT_C48579273.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max