<
>
Specifications
Voltage Rating:
16V
Capacitance:
10uF
Temperature Coefficient:
X5R
Tolerance:
±10%
Mfr. Part #:
1206X5R106K160NT
Model Number:
1206X5R106K160NT
Package:
1206
Key Attributes
Product Description
Product Overview
This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various high-voltage circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamp ballasts. The MLCCs are available in various sizes and temperature characteristics, offering reliable performance under specified conditions.
Product Attributes
- Terminal Composition: Au/Ag-Ni-Sn (from the inside out)
- RoHS/REACH Compliance: Meets RoHS and REACH standards.
Technical Specifications
| Item | Description/Specification | |||
|---|---|---|---|---|
| Application Field | ||||
| Coupling, wave filtering, resonant in high voltage circuits, switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC). | ||||
| Testing Conditions | ||||
| Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | |||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | |||
| Part Number Description Example: 1812 X7R 684 M 251 N T | ||||
| 1. Dimension Code | 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 | |||
| 2. Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||
| 3. Nominal Electrostatic Capacity | 8R0=8.0, 100=10, 101=100 (pF) | |||
| 4. Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |||
| 5. Rated Voltage (DC) | 250=25V, 251=250V, 252=2500V | |||
| 6. Terminal Composition | Au/Ag-Ni-Sn (From the inside out) | |||
| 7. Packing | T: Tape/Reel, P: Bag packing (PE) | |||
| Construction | ||||
| 1 | Ceramic dielectric | |||
| 2 | Inner electrode | |||
| 3 | Outer electrode | |||
| 4 | Nickel layer | |||
| 5 | Tin layer | |||
| Dimension (mm) | ||||
| Part Number | L (mm) | W (mm) | T (mm) | WB (mm) |
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 |
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 |
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 |
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 |
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 |
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 |
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 |
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 |
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 |
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 |
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 |
| Specification and Testing Method | ||||
| Temperature | -55~+125 | |||
| Static Capacity | NPO: 1MHz10%, 1.00.2Vrms (1000pF); 1KHz10%, 1.00.2Vrms (>1000pF) X7R/X7T/X7P: 1KHz10%, 1.00.2Vrms (10uF); 120Hz24, 0.50.1Vrms (>10uF) | |||
| Dissipation Factor (DF) | NPO: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr) X7R/X7T/X7P: Cr10uF, 1KHz10%, 1V0.1rms; Cr10uF, 120Hz24, 0.5V0.1rms | |||
| IR Insulation Resistance | NPO: IR50000M, C10nF; IR*Cr500S, C10nF X7R/X7T/X7P: IR10000M, C25nF; IR*Cr100S, C25nF (Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA) | |||
| Hi-pot (DC) | Ur=100V: 2.5 x rated voltage; Ur=200V/250V: 2.0 x rated voltage; Ur=450/500/630V: 1.5 x rated voltage; 1KVUr2KV: 1.2 x rated voltage; 2KVUr: 1.1 x rated voltage (Voltage Raising time: 110S, Voltage maintaining time: 2S) | |||
| Solderability | Soldering area 90%, No Damage (Pre-heating: 80-120, 10-30s; Solder: lead free; Flux; Soldering temp: 2455; Solder time: 20.5s) | |||
| Resistance to the heat of soldering | No visual damage, soldering area 90% (Pre-heating: 100-200, 102s; Soldering temp: 2655; Soldering time: 51s. Cleaning with solvent. Room temp, 242 hours.) | |||
| Electrostatic Capacity Change Rate | NPO: C/C 0.5% or 0.5pF; X7R: C/C 15%; X7T: -33% C/C22%; X7P: C/C 10% | |||
| Flexural Strength | No damage (Base board: Al2O3 /PCB; PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm, Flexural depth: 1mm, Bend speed: 0.5mm/sec). Electro static capacity change rate: C/C 10%. | |||
| Terminal Bonding Strength | No visual damage (Applied Force: 5N, Duration: 101S) | |||
| Thermal Shock | NPO: C/C 2.5% or 0.25pF; X7R/X7P: C/C 0.5%; X7T: C/C 10% (5 cycles) | |||
| Temperature Moisture Exposure | Visual: No visual damage. Capacity change rate: NPO: C/C 2% or 1pF; X7R/X7T/X7P: C/C 10%. DF: 2 times initial standard. IR: NPO: IR2500M or IR*Cr25S; X7R/X7T/X7P: IR1000M or IR*Cr25S. (Temp: 402, Humidity: 90~95%RH, Time: 50024 hours) | |||
| High Temperature Exposure | Visual: No visual damage. Capacity change rate: NPO: C/C 2% or 1pF; X7R/X7T/X7P: C/C 20%. DF: 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S; X7R/X7T/X7P: IR2000M or IR*Cr50S. (Temp: 1253, Time: 100048 hours, Voltage: 100VV250V: 2x Rated voltage; 250VV1KV: 1.5x rated voltage; 1KVV: 1.2x rated voltage) | |||
| PCB Flexural Strength | No crack and other defect (IR test after soldering MLCC on PCB) | |||
| Packing Quantity | Paper T/R (Pcs): 0201: 4000, 0402: 4000, 0603: 4000, 0805: 4000, 1206: 4000. Plastic T/R (Pcs): 0805: 3000, 1206: 3000, 1210: 2000, 1808: 1000, 1812: 800. | |||
Note: Precautions for use include soldering profiles, manual soldering, and optimum solder amount for reflow soldering. MLCCs may fail in short or open circuit modes under severe conditions beyond specified ratings.
2509251626_AIDE-CAPACITOR-1206X5R106K160NT_C49326737.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
