<
>
Specifications
Voltage Rating:
200V
Capacitance:
2.2nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0805X7R222K201NT
Model Number:
0805X7R222K201NT
Package:
0805
Key Attributes
Product Description
Product Overview
This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and lighting circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. The MLCCs are available in various sizes and temperature characteristics (C0G, X7R, X5R) with precise capacitance tolerances, rated voltages, and terminal compositions.
Product Attributes
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- RoHS/REACH Compliance: Meets standard
Technical Specifications
| Item | Description | Specification/Requirement | Testing Method | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Application Field | Coupling, wave filtering, resonant in high voltage circuits | ||||||||||
| Switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC) | |||||||||||
| Testing Condition | Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | N/A | ||||||||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | N/A | |||||||||
| Part Number Description | Dimension Code | 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 | N/A | ||||||||
| Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | N/A | |||||||||
| Nominal Electrostatic Capacity | e.g., 8R0=8.0pF, 100=10pF, 101=100pF | N/A | |||||||||
| Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | N/A | |||||||||
| Rated Voltage (DC) | e.g., 250=25V, 251=250V, 252=2500V | N/A | |||||||||
| Terminal Composition | Au/Ag-Ni-Sn (From the inside out) | N/A | |||||||||
| Packing | T: Tape/Reel, P: Bag packing (PE) | N/A | |||||||||
| Construction | 1. Ceramic dielectric | N/A | |||||||||
| 2. Inner electrode | N/A | ||||||||||
| 3. Outer electrode | N/A | ||||||||||
| 4. Nickle layer | N/A | ||||||||||
| 5. Tin layer | N/A | ||||||||||
| Dimension (mm) | Part number | L | W | T | WB | ||||||
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 | |||||||
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 | |||||||
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 | |||||||
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 1.000.20 | |||||||
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 1.250.20 | |||||||
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 | |||||||
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 | |||||||
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 | |||||||
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 | |||||||
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 | |||||||
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 | |||||||
| Specification and Testing Method | Temperature | -55~+125 | N/A | ||||||||
| Visual/Dimension | 1. No Damage, 2. Dimension meet Spec | Naked eye (Visual inspection), Digital calliper | |||||||||
| Static Capacity | Meet standard specification and tolerance | NPO: 1MHz10%, 1.00.2Vrms (1000pF); 1KHz10%, 1.00.2Vrms (>1000pF) X7R/X7T/X7P: 1KHz10%, 1.00.2Vrms (10uF); 120Hz24, 0.50.1Vrms (>10uF) | |||||||||
| Dissipation Factor (DF) | NPO: DF0.56 (Cr5pF); DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15% (50pFCr) X7R/X7T/X7P: See Note 1 | NPO: 1MHz10%, 1V0.2rms (Cr1000pF); 1KHz10%, 1V0.2rms (Cr>1000pF) X7R/X7T/X7P: 1KHz10%, 1V0.1rms (Cr10uF); 120Hz24, 0.5V0.1rms (Cr>10uF) | |||||||||
| IR Insulation Resistance | NPO: IR50000M (C10nF); IR*Cr500S (C>10nF) X7R/X7T/X7P: IR10000M (C25nF); IR*Cr100S (C>25nF) | Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA | |||||||||
| Hi-pot (DC) | No dielectric breakdown or damage | Ur=100V, 2.5 x rated voltage; Ur=200V/250V, 2.0 x rated voltage; Ur=450/500/630V, 1.5 x rated voltage; 1KVUr2KV, 1.2 x rated voltage; 2KVUr, 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S | |||||||||
| Solderability | Soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. | |||||||||
| Resistance to the heat of soldering | No damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. | |||||||||
| Electrostatic Capacity Change Rate | NPO: C/C0.5% or 0.5pF; X7R: C/C15%; X7T: -33% C/C22%; X7P: C/C10% | Initial capacitance testing: Pre-heating 150 for 1 hour, then place 48 hours under normal pressure & temperature. | |||||||||
| Flexural Strength | No damage | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Test under flexural status. Electro static capacity change rate C/C10%. Flexural depth 452. | |||||||||
| Terminal Bonding Strength | No visual damage | Applied Force: 5N, Duration: 101S | |||||||||
| Thermal Shock | NPO: C/C2.5% or 0.25pF; X7R/X7P: C/C0.5%; X7T: C/C10% | Pre-condition (X7R h characteristic): Upper limit temperature 1 hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test after place 242 hours normal temp & humidity. | |||||||||
| Temperature Moisture Exposure | Visual: No visual damage. Capacity change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C10%. DF: 2 times initial standard. IR: NPO: IR2500M or IR*Cr25S; X7R/X7T/X7P: IR1000M or IR*Cr25S. | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after place 242 hours normal temp & humidity. | |||||||||
| High Temperature Exposure | Visual: No visual damage. Capacity change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C20%. DF: 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S; X7R/X7T/X7P: IR2000M or IR*Cr50S. | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after place 48 hours under normal pressure & temperature. | |||||||||
| PCB Flexural Strength | No crack and other defect | IR Soldering the MLCC on the PCB, then pressing direction base on the photo. | |||||||||
| Embossed Plastic Taping | Code | Tape size A | B | C | D | E | F | G | H | J | T |
| 0805 | 1.55 0.20 | 2.35 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.50 Max | |
| 1206 | 1.95 0.20 | 3.60 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.1 | 1.50 -0/+0.10 | 1.85 Max | |
| 1210 | 2.70 0.10 | 3.42 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 3.2 Max | |
| 1812 | 3.66 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 8.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 4.0 Max | |
| Paper Tape Reel Packing | Code | Paper size W1 | L1 | D | C | B | P1 | P2 | P0 | d | t |
| 1005 | 0.240.02 | 0.450.02 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.30 Below | |
| 0201 | 0.370.10 | 0.670.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below | |
| 0402 | 0.650.10 | 1.150.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below | |
| 0603 | 1.10 0.10 | 1.90 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max | |
| 0805 | 1.45 0.15 | 2.30 0.15 | 8.0 0.15 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max | |
| Reel Dimensions (unit: mm) | Unit | A | B | C | D | E | F | G | H | J | T |
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | N/A | |||
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | N/A | |||
| Taping Specification | Top tape peeling strength | Standard: 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | (a) Paper Taping (b) Embossed Taping | ||||||||
| Packing Quantity | Size | Paper T/R (Pcs) | Plastic T/R (Pcs) | N/A | |||||||
| 0603 | 4000 | N/A | |||||||||
| 0805 | 4000 | 3000 | N/A | ||||||||
| 1206 | 3000 (T1.35mm), 2000 (T>1.35mm) | N/A | |||||||||
| Soldering Profile | To avoid the crack problem by sudden temperature change, follow the temperature profile in the adjacent graph (refer to the graph in the enclosure page). | ||||||||||
| Manual Soldering | Manual soldering can pose a great risk of creating thermal cracks in capacitors. The hot soldering iron tip comes into direct contact with the end terminations, and operators careless may cause the tip of the soldering iron to come into direct contact with the ceramic body of the capacitor. Therefore the soldering iron must be handled carefully, and pay much attention to the selection of the soldering iron tip and temperature contact of the tip. | ||||||||||
| Optimum Solder Amount for Reflow Soldering | N/A | ||||||||||
| Recommended Soldering Method | Size | Temperature Characteristics | Rated Voltage | Capacitance | Soldering Method | N/A | |||||
| 1005 | NPO | / | / | R | N/A | ||||||
| X7R/X5R/X7S/X6S | / | / | R | N/A | |||||||
| 0201 | NPO | / | / | R | N/A | ||||||
| X7R/X5R/X7S/X6S | / | / | R | N/A | |||||||
| Y5V | / | / | R | N/A | |||||||
| 0402 | NPO | / | / | R | N/A | ||||||
| X7R/X5R/X7S/X6S | / | / | R | N/A | |||||||
| Y5V | / | / | R | N/A | |||||||
| 0603 | NPO | / | / | R/W | N/A | ||||||
| X7R/X5R/X7S/X6S | / | C1uf | R | C1uf | |||||||
| R/W | N/A | ||||||||||
| Y5V | / | C1uf | R | C1uf | |||||||
| R/W | N/A | ||||||||||
| 0805 | NPO | / | / | R/W | N/A | ||||||
| X7R/X5R/X7S/X6S | / | C4.7uf | R | C4.7uf | |||||||
| R/W | N/A | ||||||||||
| Y5V | / | C1uf | R | C1uf | |||||||
| R/W | N/A | ||||||||||
| 1206 | NPO | / | / | R/W | N/A | ||||||
| X7R/X5R/X7S/X6S | / | C10uf | R | C10uf | |||||||
| R/W | N/A | ||||||||||
| Y5V | / | C10uf | R | C10uf | |||||||
| R/W | N/A | ||||||||||
| 1210 | NPO | / | / | R | N/A | ||||||
| X7R/X5R/X7S/X6S | / | / | R | N/A | |||||||
| Y5V | / | / | R | N/A | |||||||
| Soldering Method | RReflow Soldering, WWave Soldering | ||||||||||
| Temperature Profile for Soldering | While in preheating, please keep the temperature difference between soldering temperature and surface temperature of chips as: T150. | ||||||||||
2509251626_AIDE-CAPACITOR-0805X7R222K201NT_C48579612.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
