<
>
Specifications
Voltage Rating:
25V
Capacitance:
220nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0805X7R224K250NT
Model Number:
0805X7R224K250NT
Package:
0805
Key Attributes
Product Description
Product Overview
This product is a Multi-Layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and electronic circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight units, and energy-saving lamps. The MLCCs are available in a range of sizes and temperature characteristics, offering reliable performance under specified conditions.
Product Attributes
- Temperature Characteristics: C0G (030 PPM/), X7R (15%), X5R (15%)
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- Packing Options: Tape/Reel (T), Bag packing (P)
- Compliance: ROHS/REACH
Technical Specifications
| Item | Description | Specification/Requirement | Testing Method |
|---|---|---|---|
| 1. Temperature | Operating Temperature Range | -55~+125 | N/A |
| N/A | N/A | ||
| 2. Visual/ Dimension | No Damage | 1, No Damage | Naked eye (Visual inspection) |
| Dimension meet Spec | N/A | Digital calliper | |
| 3. Static Capacity | Nominal Electrostatic Capacity | Meet standard specification and tolerance |
|
| N/A | N/A | ||
| 4. Dissipation Factor (DF) | DF | NPO Characteristic: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr) |
|
| X7R/X7T/X7P characteristic: |
| ||
| 5. IR Insulation Resistance | IR | NPO Characteristic: IR50000M, C10nF; IR*Cr500S, C10nF | Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA |
| X7R/X7T/X7P Characteristic: IR10000M, C25nF; IR*Cr100S, C25nF | N/A | ||
| 6. Hi-pot (DC) | Dielectric Strength | No dielectric breakdown or damage |
|
| N/A | N/A | ||
| 7. Solderability | Soldering Area | 90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. |
| No Damage | Visual | ||
| 8. Resistance to the heat of soldering | Visual | No damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. |
| N/A | Visual | ||
| 9. Flexural Strength | Electrostatic capacity change rate | NPO: C/C0.5% or 0.5pF; X7R: C/C15%; X7T: -33% C/C22%; X7P: C/C10% | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Test it under the flexural status. |
| DF | Refer to NO#4 | N/A | |
| IR | Refer to NO#5 | N/A | |
| 10. Terminal Bonding Strength | No visual damage | Applied Force: 5N, Duration: 101S | N/A |
| 11. Thermal Shock | Capacitance Change Rate | NPO: C/C2.5% or 0.25pF; X7R/X7P: C/C0.5%; X7T: C/C10% | Pre-condition (X7R h characteristic): Upper limit temperature 1 hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity. |
| DF | Refer to NO#4 | N/A | |
| 12. Temperature Moisture Exposure | Visual | No visual damage | Test it after place 242 hours normal temp & humidity. Temperature 402, Humidity 90~95%RH, time 50024 hours. |
| Capacitance Change Rate | NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C10% | N/A | |
| DF | 2 times initial standard | N/A | |
| 13. High Temperature Exposure | Visual | No visual damage | Test it after place 48 hours under normal pressure & temperature. Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). |
| Capacitance Change Rate | NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C20% | N/A | |
| DF | 2 X initial standard | N/A | |
| 14. PCB Flexural Strength | No crack and other defect | IR | Soldering the MLCC on the PCB, Then pressing direction base on the photo. |
| Part Number | Dimension (mm) | British System | Metric System |
|---|---|---|---|
| 0201 | L*W (inch) | 0.02*0.01 | 0.50*0.25 |
| 0402 | L*W (inch) | 0.04*0.02 | 1.00*0.50 |
| 0603 | L*W (inch) | 0.06*0.03 | 1.60*0.80 |
| 0805 | L*W (inch) | 0.08*0.05 | 2.00*1.25 |
| 1206 | L*W (inch) | 0.12*0.06 | 3.20*1.60 |
| 1210 | L*W (inch) | 0.12*0.10 | 3.20*2.50 |
| 1808 | L*W (inch) | 0.18*0.08 | 4.50*2.00 |
| 1812 | L*W (inch) | 0.18*0.12 | 4.50*3.20 |
| 1825 | L*W (inch) | 0.18*0.25 | 4.50*6.30 |
| 2211 | L*W (inch) | 0.22*0.11 | 5.70*2.8 |
| 2225 | L*W (inch) | 0.22*0.25 | 5.70*6.30 |
| Dimension Code | L (mm) | W (mm) | T (mm) | WB (mm) |
|---|---|---|---|---|
| 0603 | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 |
| 1005 | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 |
| 1608 | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 |
| 2012 | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 |
| 3216 | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 |
| 3225 | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 |
| 4520 | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 |
| 4532 | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 |
| 4563 | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 |
| 5750 | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 |
| 5763 | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 |
| Part Number | Paper T/R (Pcs) | Plastic T/R (Pcs) |
|---|---|---|
| 0603 | 4000 | - |
| 0805 | 4000 | 3000 (T1.35mm), 3000 (T1.35mm) |
| 1206 | - | 2000 (T1.60mm), 3000 (T1.60mm) |
| 1210 | - | 2000 |
| 1808 | - | 1000 (T1.85mm), 1000 (T1.85mm) |
| 1812 | - | 800 |
| 1812 | - | 500 |
2509251626_AIDE-CAPACITOR-0805X7R224K250NT_C48579620.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
