<
>
Specifications
Voltage Rating:
100V
Capacitance:
150pF
Temperature Coefficient:
C0G
Tolerance:
±5%
Mfr. Part #:
0603C0G151J101NT
Model Number:
0603C0G151J101NT
Package:
0603
Key Attributes
Product Description
Product Overview
This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and electronic circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamp ballasts. These MLCCs are available in medium and high voltage ratings.
Product Attributes
- Terminal Composition: Au/Ag-Ni-Sn (from the inside out)
- Certifications: ROHS compliant, REACH compliant
Technical Specifications
| Item | Description | Specification/Requirement | Testing Method | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1. Application Field | ||||||||||
| Coupling, wave filtering, resonant in high voltage circuits | Switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC) | |||||||||
| 2. Testing Conditions | ||||||||||
| Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | |||||||||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | |||||||||
| 3. Part Number Description | ||||||||||
| Dimension Code | 0201 (0.02*0.01 inch / 0.50*0.25 mm), 0402 (0.04*0.02 inch / 1.00*0.50 mm), 0603 (0.06*0.03 inch / 1.60*0.80 mm), 0805 (0.08*0.05 inch / 2.00*1.25 mm), 1206 (0.12*0.06 inch / 3.20*1.60 mm), 1210 (0.12*0.10 inch / 3.20*2.50 mm), 1808 (0.18*0.08 inch / 4.50*2.00 mm), 1812 (0.18*0.12 inch / 4.50*3.20 mm), 1825 (0.18*0.25 inch / 4.50*6.30 mm), 2211 (0.22*0.11 inch / 5.70*2.8 mm), 2225 (0.22*0.25 inch / 5.70*6.30 mm) | |||||||||
| Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||||||||
| Nominal Electrostatic Capacity | 8R08.0pF, 10010pF, 101100pF | |||||||||
| Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |||||||||
| Rated Voltage (DC) | 25025V, 251250V, 2522500V | |||||||||
| Terminal Composition | Au/Ag-Ni-Sn (From the inside out) | |||||||||
| Packing | T Tape/Reel, P Bag packing (PE) | |||||||||
| 4. Construction and Dimension | ||||||||||
| Construction | 1 Ceramic dielectric | |||||||||
| 2 Inner electrode | ||||||||||
| 3 Outer electrode | ||||||||||
| 4 Nickle layer | ||||||||||
| 5 Tin layer | ||||||||||
| Dimension (mm) | Part Number | L | W | T | WB | |||||
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 | ||||||
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 | ||||||
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 | ||||||
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 | ||||||
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 | ||||||
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 | ||||||
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 | ||||||
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 | ||||||
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 | ||||||
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 | ||||||
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 | ||||||
| 5. Specification and Testing Method | ||||||||||
| Item | Specification/Requirement | Testing method | ||||||||
| Temperature | -55~+125 | |||||||||
| Visual/Dimension | 1, No Damage 2, Dimension meet Spec | Naked eye (Visual inspection), Digital caliper | ||||||||
| Static Capacity | Meet standard specification and tolerance | NPO characteristic: 1000pF: 1MHz10%, 1.00.2Vrms 1000pF: 1KHz10%, 1.00.2Vrms X7R/X7T/X7P characteristic: 10uF: 1KHz10%, 1.00.2Vrms 10uF: 120Hz24, 0.50.1Vrms | ||||||||
| Dissipation Factor (DF) | NPO Characteristic: DF0.56, Cr5 pF DF1.5[(150/Cr)+7]10-4 (5pFCr50pF) DF0.15%, (50pFCr) Cr1000pF, 110%MHz, 1V0.2rms Cr1000pF, 110%KHz, 1V0.2rms. X7R/X7T/X7P characteristic: Cr10uF, 110%KHz, 1V0.1rms. Cr10uF, 12024Hz, 0.5V0.1rms. | See Note 1 | ||||||||
| IR Insulation Resistance | NPO Characteristic: IR50000M, C10nF; IR*Cr500S, C10nF X7R/X7T/X7P Characteristic: IR10000M, C25nF; IR*Cr100S, C25nF Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA | |||||||||
| Hi-pot (DC) | No dielectric breakdown or damage | Ur=100V, 2.5 x rated voltage Ur=200V/250V, 2.0 x rated voltage Ur=450/500/630V, 1.5 x rated voltage 1KVUr2KV, 1.2 x rated voltage 2KVUr, 1.1 x rated voltage Voltage Raising time: 110S, Voltage maintaining time: 2S | ||||||||
| Solderability | soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. | ||||||||
| Resistance to the heat of soldering | No visual damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. | ||||||||
| Electrostatic capacity change rate | NPO Characteristic: C/C0.5% or 0.5pF (larger reading) X7R: C/C15% X7T: -33% C/C22% X7P: C/C10% | Refer to NO#4, IR Refer to NO#5 | ||||||||
| Flexural strength | No damage | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Test it under the flexural status. Electro static capacity change rate C/C10%. Flexural deepth 452. | ||||||||
| Terminal bonding strength | No visual damage | Applied Force: 5N, Duration: 101S | ||||||||
| Thermal shock | NPO Characteristic: C/C2.5% or 0.25pF (larger reading) X7R/X7P- characteristic: C/C0.5% X7T characteristic: C/C10% | Pre-condition(X7R h characteristic): Upper limit temperature 1hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity. | ||||||||
| Temperature moisture exposure | Visual: No visual damage Electrostatic capacitance change rate: NPO characteristic: C/C2% or 1pF (larger reading) X7R/X7T/X7P characteristic: C/C10% DF 2 times initial standard IR: NPO characteristic: IR2500M or IR*Cr25S (Lower reading) X7R/X7T/X7P: IR1000M or IR*Cr25S (Lower reading) | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test it after place 242 hours normal temp & humidity. | ||||||||
| High temperature exposure | Visual: No visual damage Electrostatic capacitance change rate: NPO: C/C2% or 1pF (larger reading) X7R/X7T/X7P: C/C20% DF 2 X initial standard IR: NPO: IR4000M or IR*Cr40S (Lower reading) X7R/X7T/X7P: IR2000M or IR*Cr50S (Lower reading) | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Charging and discharging current 50mA Max. Test it after place 48 hours under normal pressure & temperature. | ||||||||
| PCB flexural strength | No crack and other defect | Soldering the MLCC on the PCB, Then pressing direction base on the photo. IR | ||||||||
| 6. Embossed Plastic Taping | ||||||||||
| Code | Tape size A | B | C | D | E | F | G | H | J | T |
| 0805 | 1.55 0.20 | 2.35 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.50 Max |
| 1206 | 1.95 0.20 | 3.60 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.1 | 1.50 -0/+0.10 | 1.85 Max |
| 1210 | 2.70 0.10 | 3.42 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 3.2 Max |
| 1808 | 2.20 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 3.0 Max |
| 1812 | 3.66 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 8.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 4.0 Max |
| Paper Tape Reel Packing | ||||||||||
| Code | Paper size W1 | L1 | D | C | B | P1 | P2 | P0 | d | t |
| 1005 | 0.24 0.02 | 0.45 0.02 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.30 Below |
| 0201 | 0.37 0.10 | 0.67 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0402 | 0.65 0.10 | 1.15 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.80 Below |
| Code | Papersize A | B | C | D | E | F | G | H | J | T |
| 0603 | 1.10 0.10 | 1.90 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 0805 | 1.45 0.15 | 2.30 0.15 | 8.0 0.15 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 1206 | 1.80 0.20 | 3.40 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| Reel Dimensions (unit: mm) | ||||||||||
| Unit:mm | A | B | C | D | E | F | G | |||
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| Taping specification | ||||||||||
| Top tape peeling strength | Standard: 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | (a) Paper Taping Reel type, (b) Embossed Taping | ||||||||
| Packing Quantity | ||||||||||
| Dimension | Paper T/R (Pcs) | Plastic T/R (Pcs) | ||||||||
| 0603 | 4000 | |||||||||
| 0805 | 4000 | 3000 (T1.35mm) | ||||||||
| 1206 | 3000 (T1.35mm) | |||||||||
| 1210 | 2000 (T1.60mm) | |||||||||
| 1808 | 3000 (T1.60mm) | |||||||||
| 1812 | 2000 | |||||||||
| 1812 | 1000 (T1.85mm) | |||||||||
| 1000 (T1.85mm) | ||||||||||
| 800 | ||||||||||
| 500 | ||||||||||
| 8. Precautions For Use | ||||||||||
| Soldering Profile | To avoid the crack problem by sudden temperature change, follow the temperature profile in the adjacent graph. | |||||||||
| Manual Soldering | Manual soldering can pose a great risk of creating thermal cracks in capacitors. The hot soldering iron tip comes into direct contact with the end terminations, and operators careless may cause the tip of the soldering iron to come into direct contact with the ceramic body of the capacitor. Therefore the soldering iron must be handled carefully, and pay much attention to the selection of the soldering iron tip and temperature contact of the tip. | |||||||||
| Optimum Solder Amount for Reflow Soldering | ||||||||||
| Recommended Soldering amounts | ||||||||||
| 9. Recommended Soldering Method | ||||||||||
| Size | Temperature Characteristics | Rated Voltage | Capacitance | Soldering Method | ||||||
| 1005 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| 0201 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| Y5V | / | / | R | |||||||
| 0402 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| Y5V | / | / | R | |||||||
| 0603 | NPO | / | / | R/W | ||||||
| X7R/X5R/X7S/X6S | / | C1uf | R | |||||||
| C1uf | R/W | |||||||||
| Y5V | / | C1uf | R | |||||||
| C1uf | R/W | |||||||||
| 0805 | NPO | / | / | R/W | ||||||
| X7R/X5R/X7S/X6S | / | C4.7uf | R | |||||||
| C4.7uf | R/W | |||||||||
| Y5V | / | C1uf | R | |||||||
| C1uf | R/W | |||||||||
| 1206 | NPO | / | / | R/W | ||||||
| X7R/X5R/X7S/X6S | / | C10uf | R | |||||||
| C10uf | R/W | |||||||||
| Y5V | / | C10uf | R | |||||||
| C10uf | R/W | |||||||||
| 1210 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| Y5V | / | / | R | |||||||
| 10. The temperature profile for soldering | ||||||||||
| While in preheating, please keep the temperature difference between soldering temperature and surface temperature of chips as: T150. | ||||||||||
2509251626_AIDE-CAPACITOR-0603C0G151J101NT_C49326296.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
