Product Overview

This product is a Multi-Layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and electronic circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. The MLCCs are available in a range of sizes and temperature characteristics, ensuring reliable performance across different operating conditions.

Product Attributes

Material: Ceramic dielectric, Inner electrode, Outer electrode, Nickel layer, Tin layer
Terminal Composition: Au/Ag-Ni-Sn (from the inside out)
Certifications: ROHS/REACH compliance

Technical Specifications

Item	Description	Specification/Requirement	Testing Method
1. Application Field	Coupling, wave filtering, resonant in high voltage circuits, switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC).
1. Application Field	Testing Conditions: Normal condition: Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa Relative condition: Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa
2. Part Number Description	Example: 1812 X7R 684 M 251 N T Dimension Code Temperature characteristic (C0G, X7R, X5R) Nominal electrostatic capacity (pF) Tolerance of electrostatic capacity (B, C, D, F, G, J, K, M, Z) Rated voltage (DC) (V) Terminal composition Packing (T: Tape/Reel, P: Bag packing)
3. Dimension Codes & Dimensions	Code	*LW (inch)**	*LW (mm)**
	0201	0.02*0.01	0.50*0.25
	0402	0.04*0.02	1.00*0.50
	0603	0.06*0.03	1.60*0.80
	0805	0.08*0.05	2.00*1.25
	1206	0.12*0.06	3.20*1.60
	1210	0.12*0.10	3.20*2.50
	1808	0.18*0.08	4.50*2.00
	1812	0.18*0.12	4.50*3.20
	1825	0.18*0.25	4.50*6.30
	2211	0.22*0.11	5.70*2.8
	2225	0.22*0.25	5.70*6.30
4. Construction	Item	Description
4. Construction	1	Ceramic dielectric
2	Inner electrode
3	Outer electrode
4	Nickel layer
5	Tin layer
5. Specification and Testing Method	Temperature	-55~+125	N/A
	Visual/Dimension	1. No Damage 2. Dimension meet Spec	Naked eye (Visual inspection), Digital calliper
	Static Capacity	Meet standard specification and tolerance	NPO characteristic: Capacity 1000pF 1MHz10% 1.00.2Vrms; 1000pF 1KHz10% 1.00.2Vrms X7R/X7T/X7P characteristic: Capacity 10uF 1KHz10% 1.00.2Vrms; 10uF 120Hz24 0.50.1Vrms
	Dissipation Factor (DF)	NPO Characteristic: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr) Cr1000pF, Testing frequency 110%MHz, Testing voltage 1V0.2rms. Cr1000pF, Testing frequency 110%KHz, Testing voltage 1V0.2rms. X7R/X7T/X7P characteristic: see Note 1 Cr10uF, Test frequency 110%KHz,Voltage 1V0.1rms. Cr10uF, Frequency 12024Hz, Voltage 0.5V0.1rms.	N/A
	IR Insulation Resistance	NPO Characteristic: IR50000M,C10nF; IRCr500S,C10nF X7R/X7T/X7P Characteristic: IR10000M,C25nF; IRCr100S,C25nF Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA	N/A
	Hi-pot (DC)	No dielectric breakdown or damage	Ur=100V, 2.5 x rated voltage; Ur=200V/250V, 2.0 x rated voltage; Ur=450/500/630V, 1.5 x rated voltage; 1KVUr2KV, 1.2 x rated voltage; 2KVUr, 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time2S
	Solderability	Soldering area90%	Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s
	Resistance to the heat of soldering	No damage, soldering area90%	Pre-heating temperature 100-200, time 102 s, soldering temperature :2655, Soldering time:51s. Cleaning with solvent. Room temperature, time :242 hours.
	Electrostatic capacity change rate	NPO Characteristic: C/C0.5% or 0.5pF larger reading X7R: C/C15% X7T: -33% C/C22% X7P: C/C10%	N/A
	Flexural strength	No damage	Base boardAl2O3 /PCB. PCB dimension Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm, Bend speed: 0.5mm/sec. Test it under the flexural status.
	Electro static capacity change rate (under flexural status)	C/C10%	Flexural deepth 452
	Terminal bonding strength	No visual damage	Applied Force: 5N, Duration: 101S
	Thermal shock	NPO Characteristic: C/C2.5% or 0.25pF (larger reading) X7R/X7P- characteristic: C/C0.5% X7T characteristic: C/C10% Pre-condition(X7R h characteristic):Upper limit temperature 1hour, place 241 hours, start to testing. Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity	N/A
	Temperature moisture exposure	Visual: No visual damage Electrostatic capacitance change rate: NPO characteristic: C/C2% or 1pF (larger reading); X7R/X7T/X7P characteristic: C/C10% DF: 2 times initial standard IR: NPO characteristic: IR2500M or IRCr25S (Lower reading); X7R/X7T/X7P: IR1000M or IRCr25S (Lower reading) Test it after place 242 hours normal temp & humidity. Temperature 402, Humidity 90~95%RH, time 500+24 hours	N/A
High temperature exposure	Visual: No visual damage Electrostatic capacitance change rate: NPO: C/C2% or 1pF (larger reading); X7R/X7T/X7P: C/C20% DF: 2 X initial standard IR: NPO: IR4000M or IRCr40S (Lower reading); X7R/X7T/X7P: IR2000M or IRCr50S (Lower reading) Test it after place 48hours under normal pressure & temperature. Temperature 1253, Time 100048 hours. Voltage: 100VV250V 2x Rated voltage; 250VV1KV 1.5x rated voltage; 1KVV 1.2x rated voltage. Charging and discharging current 50mA Max.	N/A
6. Embossed Plastic Taping	Tapesize: 0805 (1.550.20), 1206 (1.950.20), 1210 (2.700.10), 1808 (2.200.10), 1812 (3.660.10)
7. Paper Tape Reel Packing	Papersize: 1005 (0.240.02), 0201 (0.370.10), 0402 (0.650.10) for one type; 0603 (1.100.10), 0805 (1.450.15), 1206 (1.800.20) for another type.
8. Reel Dimensions	7REEL: 1782.0, 13REEL: 3302.0
9. Taping Specification	Top tape peeling strength: 0.1N < peeling strength < 0.7N
10. Packing Quantity	Paper T/R (Pcs): 0603 (4000), 0805 (4000), 1005 (4000) Plastic T/R (Pcs): 0805 (3000), 1206 (3000 T1.60mm, 2000 T1.60mm), 1812 (1000 T1.85mm, 800 T1.85mm)
11. ROHS/REACH Compliance	RoHS: meet the standard; REACH: meet the standard
12. Precautions For Use	MLCCs may fail in short circuit mode under severe conditions. Follow recommended soldering profiles to avoid cracks. Handle with care during manual soldering. Refer to recommended soldering amounts and methods.

Note 1: Detailed DF exceptions for X7R/X5R/X6S/X7S/Y5V characteristics based on rated voltage and capacitance are provided in the original document.

2509251626_AIDE-CAPACITOR-0603C0G470K500NT_C49326330.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

Email*

Phone / WhatsApp

Name

Company Name

Inquiry Message*

Attach Files

Choose Files

You Can Upload Up To 5 Files And Each File Sized 10M Max