86--15347289033
feliciazhou@pa.ecer.com
Online Service

Online Service

Contact Person
feliciazhou@pa.ecer.com
8615347289033
+86 136 6733 2386
quality multi layer ceramic capacitor AIDE CAPACITOR 0603X7R475K6R3NT designed for AC DC DC DC power chargers and networking factory
<
quality multi layer ceramic capacitor AIDE CAPACITOR 0603X7R475K6R3NT designed for AC DC DC DC power chargers and networking factory
>
Specifications
Voltage Rating:
6.3V
Capacitance:
4.7uF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0603X7R475K6R3NT
Model Number:
0603X7R475K6R3NT
Package:
0603
Key Attributes
Product Description

Product Overview

This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is utilized for coupling, wave filtering, and resonant functions within various high-voltage circuits. Key application areas include switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. These MLCCs are suitable for medium and high-voltage requirements.

Product Attributes

  • Terminal Composition: Au/Ag-Ni-Sn (from the inside out)
  • RoHS/REACH Compliance: Meets RoHS and REACH standards.

Technical Specifications

Item Description/Specification Testing Method
Application Field
Coupling, wave filtering, resonant in high voltage circuits N/A
Applications Switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC). N/A
Testing Conditions
Normal Condition Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa N/A
Relative Condition Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa N/A
Part Number Description Example: 1812 X7R 684 M 251 N T
Item 1: Dimension Code 0201 (0.02*0.01 inch / 0.50*0.25 mm), 0402 (0.04*0.02 inch / 1.00*0.50 mm), 0603 (0.06*0.03 inch / 1.60*0.80 mm), 0805 (0.08*0.05 inch / 2.00*1.25 mm), 1206 (0.12*0.06 inch / 3.20*1.60 mm), 1210 (0.12*0.10 inch / 3.20*2.50 mm), 1808 (0.18*0.08 inch / 4.50*2.00 mm), 1812 (0.18*0.12 inch / 4.50*3.20 mm), 1825 (0.18*0.25 inch / 4.50*6.30 mm), 2211 (0.22*0.11 inch / 5.70*2.8 mm), 2225 (0.22*0.25 inch / 5.70*6.30 mm) N/A
Item 2: Temperature Characteristic C0G (030 PPM/), X7R (15%), X5R (15%) N/A
Item 3: Nominal Electrostatic Capacity 8R0 (8.0 pF), 100 (10 pF), 101 (100 pF) N/A
Item 4: Tolerance of Electrostatic Capacity B: 0.1pF, C: 0.25pF, D: 0.5pF, F: 1%, G: 2%, J: 5%, K: 10%, M: 20%, Z: +80%/-20% N/A
Item 5: Rated Voltage (DC) 250 (25V), 251 (250V), 252 (2500V) N/A
Item 6: Terminal Composition Au/Ag-Ni-Sn (From the inside out) N/A
Item 7: Packing T (Tape/Reel), P (Bag packing) N/A
Construction
Item 1 Ceramic dielectric N/A
Item 2 Inner electrode N/A
Item 3 Outer electrode N/A
Item 4 Nickel layer N/A
Item 5 Tin layer N/A
Dimension (mm)
Part Number L Tol W Tol T Tol WB Tol
0201 (0603) 0.60 0.10 0.30 0.05 0.30 0.05 0.10 0.05
0402 (1005) 1.00 0.15 0.50 0.15 0.50 0.10 0.20 0.10
0603 (1608) 1.60 0.20 0.80 0.15 0.80 0.15 0.30 0.10
0805 (2012) 2.00 0.20 1.25 0.20 0.80 0.20 0.50 0.20
1206 (3216) 3.20 0.30 1.60 0.30 1.00 0.20 0.60 0.30
1210 (3225) 3.20 0.30 2.50 0.30 2.70 0.80 0.30
1808 (4520) 4.50 0.40 2.00 0.20 2.70 0.80 0.30
1812 (4532) 4.50 0.40 3.20 0.30 3.50 0.80 0.30
1825 (4563) 4.50 0.40 6.30 0.50 3.50 0.80 0.30
2220 (5750) 5.70 0.50 5.00 0.50 3.50 1.00 0.40
2225 (5763) 5.70 0.50 6.30 0.50 6.20 1.00 0.40
Specification and Testing Method
1. Temperature -55~+125 N/A
2. Visual/Dimension 1. No Damage, 2. Dimension meet Spec Naked eye (Visual inspection), Digital calliper
3. Static Capacity Meet standard specification and tolerance
  • NPO characteristic: Capacity 1000pF 1MHz10%, 1.00.2Vrms; >1000pF 1KHz10%, 1.00.2Vrms
  • X7R/X7T/X7P characteristic: 10uF 1KHz10%, 1.00.2Vrms; >10uF 120Hz24, 0.50.1Vrms
4. Dissipation Factor (DF)
  • NPO Characteristic: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr)
  • X7R/X7T/X7P characteristic: See Note 1
  • Cr1000pF, 110%MHz, 1V0.2rms. Cr1000pF, 110%KHz, 1V0.2rms.
  • Cr10uF, 110%KHz, 1V0.1rms. Cr10uF, 12024Hz, 0.5V0.1rms.
5. IR Insulation Resistance
  • NPO Characteristic: IR50000M, C10nF; IR*Cr500S, C10nF
  • X7R/X7T/X7P Characteristic: IR10000M, C25nF; IR*Cr100S, C25nF
 Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA
6. Hi-pot (DC) No dielectric breakdown or damage
  • Ur=100V, 2.5 x rated voltage
  • Ur=200V/250V, 2.0 x rated voltage
  • Ur=450/500/630V, 1.5 x rated voltage
  • 1KVUr2KV, 1.2 x rated voltage
  • 2KVUr, 1.1 x rated voltage
Voltage Raising time: 110S, Voltage maintaining time: 2S
7. Solderability Soldering area 90% Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s
8. Resistance to the heat of soldering Visual-No damage, soldering area 90% Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours.
9. Flexural strength No damage Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Test it under the flexural status. Electro static capacity change rate C/C10%. Flexural deepth 452
10. Terminal bonding strength No visual damage Applied Force: 5N, Duration: 101S
11. Thermal shock
  • NPO Characteristic: C/C2.5% or 0.25pF (larger reading)
  • X7R/X7P characteristic: C/C0.5%
  • X7T characteristic: C/C10%
 Pre-condition (X7R h characteristic): Upper limit temperature 1hour, place 241 hours, start to testing. Run 5 cycles Thermal shock. Test it after place 242hours normal temp & humidity.
12. Temperature moisture exposure
  • Visual: No visual damage
  • Capacity change rate: NPO characteristic: C/C2% or 1pF (larger reading); X7R/X7T/X7P characteristic: C/C10%
  • DF: 2 times initial standard
  • IR: NPO characteristic: IR2500M or IR*Cr25S (Lower reading); X7R/X7T/X7P: IR1000M or IR*Cr25S (Lower reading)
 Temperature 402, Humidity 90~95%RH, time 50024 hours. Test it after place 242hours normal temp & humidity.
13. High temperature exposure
  • Visual: No visual damage
  • Capacity change rate: NPO: C/C2% or 1pF (larger reading); X7R/X7T/X7P: C/C20%
  • DF: 2 X initial standard
  • IR: NPO: IR4000M or IR*Cr40S (Lower reading); X7R/X7T/X7P: IR2000M or IR*Cr50S (Lower reading)
 Temperature 1253, Time 100048 hours. Charging and discharging current 50mA Max. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test it after place 48hours under normal pressure & temperature.
14. PCB flexural strength No crack and other defect IR Soldering the MLCC on the PCB, Then pressing direction base on the photo. SIZE A B C: 0805(2012) 1.2 4 1.65; 1206(3216) 2.2 5 2; 1210(3225) 2.2 5 2.9; 1812(4532) 3.5 7 3.7; 2220(5750) 4.5 8 5.6
EMBOSSED PLASTIC TAPING
Embossed tape reel packing for 0805(2012)~1812(4532) type
CodeTape sizeABCDEFGHJ
T08051.55 0.202.35 0.208.00 0.203.50 0.051.75 0.104.00 0.102.00 0.104.00 0.101.50 -0/+0.10
12061.95 0.203.60 0.208.00 0.203.50 0.051.75 0.104.00 0.102.00 0.104.00 0.11.50 -0/+0.10
12102.70 0.103.42 0.108.00 0.103.50 0.051.75 0.104.00 0.102.00 0.054.00 0.101.55 -0/+0.10
18082.20 0.104.95 0.1012.00 0.105.50 0.051.75 0.104.00 0.102.00 0.054.00 0.101.50 -0/+0.10
18123.66 0.104.95 0.1012.00 0.105.50 0.051.75 0.108.00 0.102.00 0.054.00 0.101.55 -0/+0.10
Paper tape reel packing for 10050402~12063216
CodePapersizeW1L1DCBP1P2P0dt
10050.240.020.450.028.000.103.500.051.750.102.000.052.000.054.000.101.50 -0/+0.100.30 Below
02010.370.100.670.108.000.103.500.051.750.102.000.052.000.054.000.101.50 -0/+0.100.80 Below
04020.650.101.150.108.000.103.500.051.750.102.000.052.000.054.000.101.50 -0/+0.100.80 Below
CodePapersizeABCDEFGHJT
06031.10 0.101.90 0.108.00 0.103.50 0.051.75 0.104.00 0.102.00 0.104.00 0.101.50 -0/+0.101.10 Max
08051.45 0.152.30 0.158.0 0.153.50 0.051.75 0.104.00 0.102.00 0.104.00 0.101.50 -0/+0.101.10 Max
12061.80 0.203.40 0.208.00 0.203.50 0.051.75 0.104.00 0.102.00 0.104.00 0.101.50 -0/+0.101.10 Max
Reel Dimensions 7REEL: 1782.0, 3.0, 130.5, 210.5, 21 or Bigger, 1010.5, 12max. 13REEL: 3302.0, 3.0, 130.5, 210.5, 21 or Bigger, 1010.5, 12max.
Taping specification Top tape peeling strength: 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape.
Packing quantity
DimensionPaper T/R (Pcs)Plastic T/R (Pcs)
06034000-
080540003000 (T1.35mm)
1206-3000 (T1.60mm) / 2000 (T1.60mm)
1210-1000 (T1.85mm) / 800 (T1.85mm)
1808-500
1812-500
Precautions For Use
Soldering Profile Refer to the graph in the enclosure page. N/A
Manual Soldering Caution against thermal cracks; careful handling of soldering iron tip and temperature. N/A
Recommended Soldering Method
SizeTemperature CharacteristicsRated VoltageCapacitanceSoldering Method
1005NPO//R
X7R/X5R/X7S/X6S//R
0201NPO//R
X7R/X5R/X7S/X6S//R
Y5V//R
0402NPO//R
X7R/X5R/X7S/X6S//R
Y5V//R
0603NPO//R/W
X7R/X5R/X7S/X6S/C1ufR
/C1ufR/W
Y5V/C1ufR
/C1ufR/W
0805NPO//R/W
X7R/X5R/X7S/X6S/C4.7ufR
/C4.7ufR/W
Y5V/C1ufR
/C1ufR/W
1206NPO//R/W
X7R/X5R/X7S/X6S/C10ufR
/C10ufR/W
Y5V/C10ufR
/C10ufR/W
1210NPO//R
X7R/X5R/X7S/X6S//R
Y5V//R
Soldering method: RReflow Soldering, WWave Soldering
Soldering temperature profile Keep temperature difference between soldering temperature and surface temperature of chips as T150 during preheating.

2509251626_AIDE-CAPACITOR-0603X7R475K6R3NT_C49326650.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max