86--15347289033
feliciazhou@pa.ecer.com
Online Service

Online Service

Contact Person
feliciazhou@pa.ecer.com
8615347289033
+86 136 6733 2386
quality AIDE CAPACITOR 0603X7R822K500NT Medium High Voltage MLCC for Switch Power Supplies AC DC and DC DC Chargers factory
<
quality AIDE CAPACITOR 0603X7R822K500NT Medium High Voltage MLCC for Switch Power Supplies AC DC and DC DC Chargers factory
>
Specifications
Voltage Rating:
50V
Capacitance:
8.2nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0603X7R822K500NT
Model Number:
0603X7R822K500NT
Package:
0603
Key Attributes
Product Description

Product Overview

This product is a Multi-Layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and electronic circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. These MLCCs are available in medium and high voltage ratings.

Product Attributes

  • Terminal Composition: Au/Ag-Ni-Sn (from the inside out)
  • ROHS/REACH Compliance: Meets RoHS and REACH standards.

Technical Specifications

Item Description/Specification Testing Method
Application Field
Coupling, wave filtering, resonant in high voltage circuits, switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC).
Testing Conditions
Normal Condition Temperature: 15~35, Humidity: 45~75%RH, Normal atmosphere: 86~106kPa
Relative Condition Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa
Part Number Description Example: 1812 X7R 684 M 251 N T
1. Dimension Code
  • 0201 (0.02*0.01 inch / 0.50*0.25 mm)
  • 0402 (0.04*0.02 inch / 1.00*0.50 mm)
  • 0603 (0.06*0.03 inch / 1.60*0.80 mm)
  • 0805 (0.08*0.05 inch / 2.00*1.25 mm)
  • 1206 (0.12*0.06 inch / 3.20*1.60 mm)
  • 1210 (0.12*0.10 inch / 3.20*2.50 mm)
  • 1808 (0.18*0.08 inch / 4.50*2.00 mm)
  • 1812 (0.18*0.12 inch / 4.50*3.20 mm)
  • 1825 (0.18*0.25 inch / 4.50*6.30 mm)
  • 2211 (0.22*0.11 inch / 5.70*2.8 mm)
  • 2225 (0.22*0.25 inch / 5.70*6.30 mm)
2. Temperature Characteristic C0G (030 PPM/), X7R (15%), X5R (15%)
3. Nominal Electrostatic Capacity 8R0=8.0pF, 100=10pF, 101=100pF
4. Tolerance of Electrostatic Capacity B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20%
5. Rated Voltage (DC) 250=25V, 251=250V, 252=2500V
6. Terminal Composition Au/Ag-Ni-Sn (From the inside out)
7. Packing T: Tape/Reel, P: Bag packing (PE)
Construction
1. Ceramic dielectric
2. Inner electrode
3. Outer electrode
4. Nickle layer
5. Tin layer
Dimension (mm)
Part Number L W T WB
0201 (0603) 0.600.10 0.300.05 0.300.05 0.100.05
0402 (1005) 1.000.15 0.500.15 0.500.10 0.200.10
0603 (1608) 1.600.20 0.800.15 0.800.15 0.300.10
0805 (2012) 2.000.20 1.250.20 0.800.20 0.500.20
1206 (3216) 3.200.30 1.600.30 1.000.20 0.600.30
1210 (3225) 3.200.30 2.500.30 2.70 0.800.30
1808 (4520) 4.500.40 2.000.20 2.70 0.800.30
1812 (4532) 4.500.40 3.200.30 3.50 0.800.30
1825 (4563) 4.500.40 6.300.50 3.50 0.800.30
2220 (5750) 5.700.50 5.000.50 3.50 1.000.40
2225 (5763) 5.700.50 6.300.50 6.20 1.000.40
Specification and Testing Method
1. Temperature -55~+125
2. Visual/Dimension 1. No Damage, 2. Dimension meet Spec Naked eye (Visual inspection), Digital calliper
3. Static Capacity Meet standard specification and tolerance
  • NPO: 1MHz10%, 1.00.2Vrms (1000pF); 1KHz10%, 1.00.2Vrms (>1000pF)
  • X7R/X7T/X7P: 1KHz10%, 1.00.2Vrms (10uF); 120Hz24, 0.50.1Vrms (>10uF)
4. Dissipation Factor (DF)
  • NPO: DF0.56 (Cr5pF); DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15% (50pFCr)
  • X7R/X7T/X7P: See Note 1
  • NPO: 1MHz10%, 1V0.2rms (Cr1000pF); 1KHz10%, 1V0.2rms (Cr1000pF)
  • X7R/X7T/X7P: 1KHz10%, 1V0.1rms (Cr10uF); 120Hz24, 0.5V0.1rms (Cr10uF)
5. IR Insulation Resistance
  • NPO: IR50000M (C10nF); IR*Cr500S (C10nF)
  • X7R/X7T/X7P: IR10000M (C25nF); IR*Cr100S (C25nF)
 Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA
6. Hi-pot (DC)
  • Ur=100V: 2.5 x rated voltage
  • Ur=200V/250V: 2.0 x rated voltage
  • Ur=450/500/630V: 1.5 x rated voltage
  • 1KVUr2KV: 1.2 x rated voltage
  • 2KVUr: 1.1 x rated voltage
 Voltage Raising time: 110S, Voltage maintaining time: 2S
7. Solderability Soldering area90% Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s.
8. Resistance to the heat of soldering No visual damage, soldering area90% Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours.
9. Flexural Strength No damage. Electrostatic capacity change rate C/C10% Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec.
10. Terminal Bonding Strength No visual damage. Applied Force: 5N, Duration: 101S
11. Thermal Shock
  • NPO: C/C2.5% or 0.25pF
  • X7R/X7P: C/C0.5%
  • X7T: C/C10%
 5 cycles. Test after 242 hours at normal temp & humidity.
12. Temperature Moisture Exposure
  • Visual: No visual damage
  • Capacitance change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C10%
  • DF: 2 times initial standard
  • IR: NPO: IR2500M or IR*Cr25S; X7R/X7T/X7P: IR1000M or IR*Cr25S
 Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after 242 hours at normal temp & humidity.
13. High Temperature Exposure
  • Visual: No visual damage
  • Capacitance change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C20%
  • DF: 2 X initial standard
  • IR: NPO: IR4000M or IR*Cr40S; X7R/X7T/X7P: IR2000M or IR*Cr50S
 Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after 48 hours under normal pressure & temperature.
14. PCB Flexural Strength No crack and other defect. Soldering the MLCC on the PCB, then pressing.
Embossed Plastic Taping Dimensions (mm)
Code Tape size A B C D E F G H J T
0805 1.55 0.20 2.35 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.50 Max
1206 1.95 0.20 3.60 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.85 Max
1210 2.70 0.10 3.42 0.10 8.00 0.10 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.05 4.00 0.10 1.55 -0/+0.10 3.2 Max
1808 2.20 0.10 4.95 0.10 12.00 0.10 5.50 0.05 1.75 0.10 4.00 0.10 2.00 0.05 4.00 0.10 1.50 -0/+0.10 3.0 Max
1812 3.66 0.10 4.95 0.10 12.00 0.10 5.50 0.05 1.75 0.10 8.00 0.10 2.00 0.05 4.00 0.10 1.55 -0/+0.10 4.0 Max
Paper Tape Reel Packing Dimensions (mm)
Code Paper size W1 L1 D C B P1 P2 P0 d t
1005 0.24 0.02 0.45 0.02 8.00 0.10 3.50 0.05 1.75 0.10 2.00 0.05 2.00 0.05 4.00 0.10 1.50 -0/+0.10 0.30 Below
0201 0.37 0.10 0.67 0.10 8.00 0.10 3.50 0.05 1.75 0.10 2.00 0.05 2.00 0.05 4.00 0.10 1.50 -0/+0.10 0.80 Below
0402 0.65 0.10 1.15 0.10 8.00 0.10 3.50 0.05 1.75 0.10 2.00 0.05 2.00 0.05 4.00 0.10 1.50 -0/+0.10 0.80 Below
0603 1.10 0.10 1.90 0.10 8.00 0.10 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
0805 1.45 0.15 2.30 0.15 8.0 0.15 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
1206 1.80 0.20 3.40 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
Reel Dimensions (mm)
Type A B C D E F G
7REEL 1782.0 3.0 130.5 210.5 21 or Bigger 1010.5 12max
13REEL 3302.0 3.0 130.5 210.5 21 or Bigger 1010.5 12max
Taping Specification
Top tape peeling strength 0.1N < peeling strength < 0.7N No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape.
Packing Quantity
Size Paper T/R (Pcs) Plastic T/R (Pcs)
0603 4000 -
0805 4000 3000 (T1.35mm)
1206 - 3000 (T>1.35mm)
1210 - 2000 (T1.60mm)
1808 - 3000 (T>1.60mm)
1812 - 2000
1812 - 1000 (T1.85mm)
800 (T>1.85mm)
500
Precautions For Use
Soldering Profile To avoid crack problem by sudden temperature change, follow the temperature profile in the adjacent graph.
Manual Soldering Handle soldering iron carefully, pay attention to the selection of soldering iron tip and temperature contact.
Recommended Soldering Method
Size Temperature Characteristics Soldering Method
1005 NPO R
X7R/X5R/X7S/X6S R
0201 NPO R
X7R/X5R/X7S/X6S R
Y5V R
0402 NPO R
X7R/X5R/X7S/X6S R
Y5V R
0603 NPO R/W
X7R/X5R/X7S/X6S C1uf: R; C1uf: R/W
Y5V C1uf: R; C1uf: R/W
0805 NPO R/W
X7R/X5R/X7S/X6S C4.7uf: R; C4.7uf: R/W
Y5V C1uf: R; C1uf: R/W
1206 NPO R/W
X7R/X5R/X7S/X6S C10uf: R; C10uf: R/W
Y5V C10uf: R; C10uf: R/W
1210 NPO R
X7R/X5R/X7S/X6S R
Y5V R
Soldering method key: RReflow Soldering, WWave Soldering
Soldering Temperature Profile
While in preheating, keep the temperature difference between soldering temperature and surface temperature of chips as: T150.

2509251626_AIDE-CAPACITOR-0603X7R822K500NT_C49326660.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max