<
>
Specifications
Voltage Rating:
50V
Capacitance:
10nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0603X7R103K500NT
Model Number:
0603X7R103K500NT
Package:
0603
Key Attributes
Product Description
Product Overview
This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and lighting circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. The MLCCs are available in various sizes and temperature characteristics, ensuring reliable performance across a range of operating conditions.
Product Attributes
- Temperature Characteristic: C0G (030 PPM/), X7R (15%), X5R (15%)
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- Packing Options: Tape/Reel (T), Bag packing (P)
- Compliance: ROHS/REACH compliant
Technical Specifications
| Item | Description/Specification | Testing Method | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Application Field | ||||||||||
| Coupling, wave filtering, resonant in high voltage circuits, switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC). | ||||||||||
| Testing Conditions | ||||||||||
| Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | |||||||||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | |||||||||
| Part Number Description Example: 1812 X7R 684 M 251 N T | ||||||||||
| 1. Dimension Code | 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 | |||||||||
| 2. Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||||||||
| 3. Nominal Electrostatic Capacity | 8R0=8.0pF, 100=10pF, 101=100pF | |||||||||
| 4. Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |||||||||
| 5. Rated Voltage (DC) | 250=25V, 251=250V, 252=2500V | |||||||||
| 6. Terminal Composition | Au/Ag-Ni-Sn | |||||||||
| 7. Packing | T (Tape/Reel), P (Bag packing) | |||||||||
| Construction | ||||||||||
| 1 | Ceramic dielectric | |||||||||
| 2 | Inner electrode | |||||||||
| 3 | Outer electrode | |||||||||
| 4 | Nickel layer | |||||||||
| 5 | Tin layer | |||||||||
| Dimension (mm) | ||||||||||
| Part Number | L | W | T | WB | ||||||
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 | ||||||
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 | ||||||
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 | ||||||
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 | ||||||
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 | ||||||
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 | ||||||
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 | ||||||
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 | ||||||
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 | ||||||
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 | ||||||
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 | ||||||
| Specification and Testing Method | ||||||||||
| 1. Temperature | -55~+125 | |||||||||
| 2. Visual/Dimension | 1. No Damage, 2. Dimension meet Spec | Naked eye (Visual inspection), Digital calliper | ||||||||
| 3. Static Capacity | Meet standard specification and tolerance | NPO: 1MHz10%, 1.00.2Vrms (1000pF); 1KHz10%, 1.00.2Vrms (>1000pF). X7R/X7T/X7P: 1KHz10%, 1.00.2Vrms (10uF); 120Hz24, 0.50.1Vrms (>10uF). | ||||||||
| 4. Dissipation Factor (DF) | NPO: DF0.56 (Cr5pF), DF1.5[(150/Cr)+7]10-4 (5pFCr50pF), DF0.15% (50pFCr). X7R/X7T/X7P: See Note 1. | NPO: 110%MHz, 1V0.2rms (Cr1000pF); 110%KHz, 1V0.2rms (Cr>1000pF). X7R/X7T/X7P: 110%KHz, 1V0.1rms (Cr10uF); 12024Hz, 0.5V0.1rms (Cr>10uF). | ||||||||
| 5. IR Insulation Resistance | NPO: IR50000M (C10nF), IR*Cr500S (C>10nF). X7R/X7T/X7P: IR10000M (C25nF), IR*Cr100S (C>25nF). | Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA. | ||||||||
| 6. Hi-pot (DC) | Dielectric breakdown or damage | Ur=100V: 2.5 x rated voltage; Ur=200V/250V: 2.0 x rated voltage; Ur=450/500/630V: 1.5 x rated voltage; 1KVUr2KV: 1.2 x rated voltage; 2KVUr: 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S. | ||||||||
| 7. Solderability | Soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. | ||||||||
| 8. Resistance to the heat of soldering | Visual-No damage, soldering area90% | Pre-heating temperature 100-200, time 102s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. | ||||||||
| 9. Flexural Strength | No damage | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Test under flexural status. Electro static capacity change rate C/C10%. Flexural depth 452. | ||||||||
| 10. Terminal Bonding Strength | No visual damage | Applied Force: 5N, Duration: 101S. | ||||||||
| 11. Thermal Shock | NPO: C/C2.5% or 0.25pF. X7R/X7P: C/C0.5%. X7T: C/C10%. | Pre-condition (X7R h characteristic): Upper limit temperature 1hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test after 242 hours normal temp & humidity. | ||||||||
| 12. Temperature Moisture Exposure | Visual: No visual damage. Electrostatic capacitance change rate: NPO: C/C2% or 1pF. X7R/X7T/X7P: C/C10%. DF 2 times initial standard. IR: NPO: IR2500M or IR*Cr25S. X7R/X7T/X7P: IR1000M or IR*Cr25S. | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after 242 hours normal temp & humidity. | ||||||||
| 13. High Temperature Exposure | Visual: No visual damage. Electrostatic capacitance change rate: NPO: C/C2% or 1pF. X7R/X7T/X7P: C/C20%. DF 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S. X7R/X7T/X7P: IR2000M or IR*Cr50S. | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after 48 hours under normal pressure & temperature. | ||||||||
| 14. PCB Flexural Strength | No crack and other defect | Soldering the MLCC on the PCB, then pressing direction based on the photo. IR measurement. | ||||||||
| Embossed Plastic Taping Dimensions (mm) | ||||||||||
| Code | Tape size A | B | C | D | E | F | G | H | J | T |
| 0805 | 1.55 0.20 | 2.35 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.50 Max |
| 1206 | 1.95 0.20 | 3.60 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.1 | 1.50 -0/+0.10 | 1.85 Max |
| 1210 | 2.70 0.10 | 3.42 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 3.2 Max |
| 1808 | 2.20 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 3.0 Max |
| 1812 | 3.66 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 8.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 4.0 Max |
| Paper Tape Reel Packing Dimensions (mm) | ||||||||||
| Code | Paper size W1 | L1 | D | C | B | P1 | P2 | P0 | d | t |
| 1005 | 0.240.02 | 0.450.02 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.30 Below |
| 0201 | 0.370.10 | 0.670.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0402 | 0.650.10 | 1.150.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0603 | 1.10 0.10 | 1.90 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 0805 | 1.45 0.15 | 2.30 0.15 | 8.0 0.15 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 1206 | 1.80 0.20 | 3.40 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| Reel Dimensions (unit: mm) | ||||||||||
| Unit | A | B | C | D | E | F | G | |||
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| Taping Specification | ||||||||||
| Top tape peeling strength | Paper Taping | (a) | 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | |||||||
| Packing Quantity | 7, ROHS/REACH compliance | 7.1 RoHS | Meet the standard | |||||||
| 7.2 REACH | Meet the standard | |||||||||
| Precautions For Use | ||||||||||
| Soldering Profile | Follow the temperature profile in the adjacent graph (refer to the graph in the enclosure page). | |||||||||
| Manual Soldering | Risk of thermal cracks. Handle soldering iron carefully, pay attention to tip selection and temperature contact. | |||||||||
| Optimum Solder Amount for Reflow Soldering | ||||||||||
| Recommended Soldering amounts | ||||||||||
| Recommended Soldering Method | ||||||||||
| Size | Temperature Characteristics | Rated Voltage | Capacitance | Soldering Method | ||||||
| 1005 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| 0201 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| Y5V | / | / | R | |||||||
| 0402 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| Y5V | / | / | R | |||||||
| 0603 | NPO | / | / | R/W | ||||||
| X7R/X5R/X7S/X6S | / | C1uf | R | |||||||
| / | C1uf | R/W | ||||||||
| Y5V | / | C1uf | R | |||||||
| / | C1uf | R/W | ||||||||
| 0805 | NPO | / | / | R/W | ||||||
| X7R/X5R/X7S/X6S | / | C4.7uf | R | |||||||
| / | C4.7uf | R/W | ||||||||
| Y5V | / | C1uf | R | |||||||
| / | C1uf | R/W | ||||||||
| 1206 | NPO | / | / | R/W | ||||||
| X7R/X5R/X7S/X6S | / | C10uf | R | |||||||
| / | C10uf | R/W | ||||||||
| Y5V | / | C10uf | R | |||||||
| / | C10uf | R/W | ||||||||
| 1210 | NPO | / | / | R | ||||||
| X7R/X5R/X7S/X6S | / | / | R | |||||||
| Y5V | / | / | R | |||||||
| Soldering method: RReflow Soldering, WWave Soldering | ||||||||||
| The temperature profile for soldering | ||||||||||
| Keep the temperature difference between soldering temperature and surface temperature of chips as: T150. | ||||||||||
2509251626_AIDE-CAPACITOR-0603X7R103K500NT_C48579278.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
