<
>
Specifications
Voltage Rating:
50V
Capacitance:
10nF
Temperature Coefficient:
C0G
Tolerance:
±5%
Mfr. Part #:
0805C0G103J500NT
Model Number:
0805C0G103J500NT
Package:
0805
Key Attributes
Product Description
Product Overview
This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is ideal for coupling, wave filtering, and resonant functions in various power supply and electronic circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. Available in a range of standard sizes and with different temperature characteristics (C0G, X7R, X5R), these MLCCs offer reliable performance under specified conditions.
Product Attributes
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- RoHS/REACH Compliance: Meets RoHS and REACH standards.
Technical Specifications
| Item | Description/Specification | Testing Method | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Application Field | ||||||||||
| Coupling, wave filtering, resonant in high voltage circuits, switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC). | ||||||||||
| Testing Conditions | ||||||||||
| Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | |||||||||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | |||||||||
| Part Number Description Example: 1812 X7R 684 M 251 N T | ||||||||||
| 1. Dimension Code | 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 | |||||||||
| 2. Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||||||||
| 3. Nominal Electrostatic Capacity | 8R08.0, 10010, 101100 (pF) | |||||||||
| 4. Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |||||||||
| 5. Rated Voltage (DC) | 25025, 251250, 2522500 (V) | |||||||||
| 6. Terminal Composition | Au/Ag-Ni-Sn | |||||||||
| 7. Packing | T Tape/Reel, P Bag packing (PE) | |||||||||
| Construction | ||||||||||
| 1 | Ceramic dielectric | |||||||||
| 2 | Inner electrode | |||||||||
| 3 | Outer electrode | |||||||||
| 4 | Nickle layer | |||||||||
| 5 | Tin layer | |||||||||
| Dimension (mm) | ||||||||||
| Part Number | L | W | T | WB | ||||||
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 | ||||||
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 | ||||||
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 | ||||||
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 | ||||||
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 | ||||||
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 | ||||||
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 | ||||||
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 | ||||||
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 | ||||||
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 | ||||||
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 | ||||||
| Specification and Testing Method | ||||||||||
| Temperature | -55~+125 | |||||||||
| Visual/Dimension | 1. No Damage, 2. Dimension meet Spec | Naked eye (Visual inspection), Digital calliper | ||||||||
| Static Capacity | Meet standard specification and tolerance | |||||||||
| Dissipation Factor (DF) | NPO Characteristic: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr) | Cr1000pF, 1MHz10%, 1V0.2rms; Cr1000pF, 1KHz10%, 1V0.2rms. X7R/X7T/X7P characteristic: Cr10uF, 1KHz10%, 1V0.1rms; Cr10uF, 120Hz24, 0.5V0.1rms. | ||||||||
| IR Insulation Resistance | NPO Characteristic: IR50000M, C10nF; IR*Cr500S, C10nF. X7R/X7T/X7P Characteristic: IR10000M, C25nF; IR*Cr100S, C25nF. | Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA | ||||||||
| Hi-pot (DC) | No dielectric breakdown or damage | Ur=100V, 2.5 x rated voltage; Ur=200V/250V, 2.0 x rated voltage; Ur=450/500/630V, 1.5 x rated voltage; 1KVUr2KV, 1.2 x rated voltage; 2KVUr, 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S | ||||||||
| Solderability | soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s | ||||||||
| Resistance to the heat of soldering | No damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. | ||||||||
| Electrostatic capacity change rate | NPO Characteristic: C/C0.5% or 0.5pF; X7R: C/C15%; X7T: -33% C/C22%; X7P: C/C10% | |||||||||
| Flexural strength | No damage. Electro static capacity change rate C/C10% | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. | ||||||||
| Terminal bonding strength | No visual damage | Applied Force: 5N, Duration: 101S | ||||||||
| Thermal shock | NPO Characteristic: C/C2.5% or 0.25pF; X7R/X7P- characteristic: C/C0.5%; X7T characteristic: C/C10% | Pre-condition(X7R h characteristic): Upper limit temperature 1hour, place 241 hours, start to testing. Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity. | ||||||||
| Temperature moisture exposure | Visual: No visual damage. Electrostatic capacitance change rate: NPO characteristic: C/C2% or 1pF; X7R/X7T/X7P characteristic: C/C10%. DF 2 times initial standard. IR: NPO characteristic: IR2500M or IR*Cr25S; X7R/X7T/X7P: IR1000M or IR*Cr25S. | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test it after place 242 hours normal temp & humidity. | ||||||||
| High temperature exposure | Visual: No visual damage. Electrostatic capacitance change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C20%. DF 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S; X7R/X7T/X7P: IR2000M or IR*Cr50S. | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test it after place 48 hours under normal pressure & temperature. | ||||||||
| PCB flexural strength | No crack and other defect | Soldering the MLCC on the PCB, then pressing direction base on the photo. | ||||||||
| Embossed Plastic Taping Dimensions (mm) | ||||||||||
| Code | Tape size A | B | C | D | E | F | G | H | J | T |
| 0805 | 1.55 0.20 | 2.35 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.50 Max |
| 1206 | 1.95 0.20 | 3.60 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.1 | 1.50 -0/+0.10 | 1.85 Max |
| 1210 | 2.70 0.10 | 3.42 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 3.2 Max |
| 1808 | 2.20 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 3.0 Max |
| 1812 | 3.66 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 8.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 4.0 Max |
| Paper Tape Reel Packing Dimensions (mm) | ||||||||||
| Code | Paper size W1 | L1 | D | C | B | P1 | P2 | P0 | d | t |
| 1005 | 0.24 0.02 | 0.45 0.02 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.30 Below |
| 0201 | 0.37 0.10 | 0.67 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0402 | 0.65 0.10 | 1.15 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0603 | 1.10 0.10 | 1.90 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 0805 | 1.45 0.15 | 2.30 0.15 | 8.0 0.15 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 1206 | 1.80 0.20 | 3.40 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| Reel Dimensions (unit: mm) | ||||||||||
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| Taping Specification | ||||||||||
| Top tape peeling strength | Standard: 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | |||||||||
| Packing Quantity | ||||||||||
| Dimension | Paper T/R (Pcs) | Plastic T/R (Pcs) | ||||||||
| 0603 | 4000 | |||||||||
| 0805 | 4000 | 3000 (T1.35mm) | ||||||||
| 1206 | 3000 (T>1.35mm) | |||||||||
| 1210 | 2000 (T1.60mm) | |||||||||
| 1808 | 3000 (T>1.60mm) | |||||||||
| 1812 | 2000 | |||||||||
| 1812 | 1000 (T1.85mm) | |||||||||
| 800 (T>1.85mm) | ||||||||||
| 500 | ||||||||||
Precautions For Use
Multi-layer Ceramic Capacitors (MLCC) may fail in a short circuit or open circuit mode when subjected to severe electrical or mechanical stress beyond specified ratings. This can result in burn out, flaming, or glowing. Adhere to the following precautions and application notes. Contact the engineering section or factory for handling questions.
- Soldering Profile: Follow the recommended temperature profile to avoid cracks due to sudden temperature changes.
- Manual Soldering: Exercise caution to prevent thermal cracks. Ensure the soldering iron tip is carefully handled and the correct tip and temperature are selected for contact with end terminations. Avoid direct contact with the ceramic body.
- Optimum Solder Amount for Reflow Soldering: Refer to recommended soldering amounts.
- Recommended Soldering Method: RReflow Soldering, WWave Soldering.
- Soldering Temperature Profile: During preheating, keep the temperature difference between soldering temperature and surface temperature of chips as T150.
2509251626_AIDE-CAPACITOR-0805C0G103J500NT_C49326666.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
