<
>
Specifications
Voltage Rating:
50V
Capacitance:
22nF
Temperature Coefficient:
M3L
Tolerance:
±5%
Mfr. Part #:
1206M3L223J500NT
Model Number:
1206M3L223J500NT
Package:
1206
Key Attributes
Product Description
Product Overview
High-voltage multilayer ceramic capacitors (MLCCs) designed for coupling, filtering, and resonant applications in high-voltage electronic circuits. Suitable for use in switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts.
Product Attributes
- Temperature Characteristics: C0G (030 PPM/), X7R (15%)
- Terminal Material: Copper-Nickel-Tin (inner to outer)
- Packaging Options: Tape & Reel (T), Bulk (P)
- Environmental Compliance: RoHS Directive, REACH Regulation (SVHC)
Technical Specifications
| Item | Specification | Test Method |
|---|---|---|
| Product Dimensions (Code) | 0201: 0.50*0.25 mm (0.02*0.01 inch) 0402: 1.00*0.50 mm (0.04*0.02 inch) 0603: 1.60*0.80 mm (0.06*0.03 inch) 0805: 2.00*1.25 mm (0.08*0.05 inch) 1206: 3.20*1.60 mm (0.12*0.06 inch) 1210: 3.20*2.50 mm (0.12*0.10 inch) 1808: 4.50*2.00 mm (0.18*0.08 inch) 1812: 4.50*3.20 mm (0.18*0.12 inch) 1825: 4.50*6.30 mm (0.18*0.25 inch) 2211: 5.70*2.8 mm (0.22*0.11 inch) 2225: 5.70*6.30 mm (0.22*0.25 inch) | N/A |
| Nominal Capacitance | Example: 473 = 47nF (three-digit method) | N/A |
| Capacitance Tolerance | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G:2%, J:5%, K:10%, M:20%, Z:+80%/-20% | N/A |
| Rated Voltage (DC) | Example: 500 = 50V, 101 = 100V, 151 = 150V (three-digit method) | N/A |
| Product Structure | 1. Ceramic Dielectric, 2. Internal Electrode, 3. External Electrode, 4. Nickel Layer, 5. Tin Layer | N/A |
| Product Dimensions (Model 1206) | Size (mm): L: 3.200.20, W: 1.600.20, T: 1.250.20, WB: 0.30-0.8 Imperial Representation: 1206 | N/A |
| Operating Temperature Range | -55 ~ +85 | Visual inspection, Vernier caliper measurement |
| Appearance & Dimensions | No visible damage, Dimensions meet specifications | Visual inspection, Vernier caliper measurement |
| Capacitance | Within specified tolerance | 10uF: 1KHz10%, 1.00.2Vrms 10uF: 120Hz24, 0.50.1Vrms |
| Dissipation Factor (DF Value) | <0.1% | Cr10uF: 1KHz10%, 1V0.1rms Cr10uF: 120Hz24, 0.5V0.1rms |
| Insulation Resistance | >1 G | Test Voltage: 250V, Test Time: 605 sec, Test Humidity: 70%, Test Temperature: 255 |
| Dielectric Withstanding Voltage (DC) | No dielectric breakdown or damage | Test Voltage: Rated Voltage, Test Time: 2 sec |
| Solderability | Soldering rate 95%, pinholes or rough area <5%, no visible damage | Preheat 80-120/10-30 sec, Lead-free solder, Flux, Solder Temp: 2455, Immersion Time: 21 sec |
| Solder Heat Resistance | Appearance: No visible damage, Soldering rate 95% | Preheat: 120-150/60 sec, Solder Pot Temp: 2705, Immersion Time: 101 sec. Electrodes fully immersed. Clean with solvent. Store at room temp for 242 hours. Capacitance change rate: -2.5% < C/C 2.5%. DF Value: Same as NO4. IR: Same as NO5. |
| Bending Strength | No visible damage | Test Substrate: Al2O3 or PCB (1.6mm thick, 100mm length, 40mm width). Bending Depth: 1mm, Pressing Speed: 1mm/sec. Measurements taken under bent state. Capacitance Change Rate: C/C5%. |
| Terminal Bond Strength | No visible damage | N/A |
| Temperature Cycling | N/A | Pre-treatment: Upper temp 1 hr, store 241 hr, initial measurement. 5 temp cycles: -55 (30 min), 25 (2-3 min), +85 (30 min), 25 (2-3 min). Store at room temp/humidity for 242 hours before testing. Capacitance Change Rate: C/C2.5%. |
| Damp Heat Test | Appearance: No visible damage | Temperature: 402, Humidity: 90-95%RH, Time: 50024 hours. Store at room temp/humidity for 24 hours after test. Capacitance Change Rate: C/C5%. DF Value: 2 times initial standard. IR: >500M. |
| High Temperature Load Test | Appearance: No visible damage | Store at room temp/humidity for 242 hours after test. Temperature: 85, Time: 100048 hours, Voltage: 1.5x Rated Voltage (100VV250V). Capacitance Change Rate: C/C5%. DF Value: 2 times initial standard. IR: >500M. |
| Tape & Reel Packaging Dimensions (1206) | A: 1.950.20, B: 3.600.20, C: 8.000.20, D: 3.500.05, E: 1.750.10, F: 4.000.10, G: 2.000.10, H: 4.000.1, J: 1.50 -0/+0.10, T: 1.85 Max | T1.35mm: 3000 Pcs/Reel T1.35mm: 2000 Pcs/Reel |
Test Conditions:
- Standard State: Room Temperature (20-30), Relative Humidity (<70%RH), Atmospheric Pressure (86-106kPa)
- Standard Relative State: Room Temperature (252), Relative Humidity (60-70%RH), Atmospheric Pressure (86-106kPa)
Note on Initial Measurement for NO3, 11, 12, 13: Preheat at 150 for 1 hour, then store at standard temperature and pressure for 48 hours before testing.
2507091655_AIDE-CAPACITOR-1206M3L223J500NT_C49326734.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
