<
>
Specifications
Voltage Rating:
50V
Capacitance:
1nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
1206X7R102K500NT
Model Number:
1206X7R102K500NT
Package:
1206
Key Attributes
Product Description
Product Overview
This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is suitable for coupling, wave filtering, and resonant functions in various power supply and electronic circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. The MLCCs are available in a range of sizes and temperature characteristics, offering reliable performance under specified conditions.
Product Attributes
- Material: Ceramic dielectric, Inner electrode, Outer electrode, Nickle layer, Tin layer
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- RoHS/REACH Compliance: Meets standard
Technical Specifications
| Item | Description/Specification | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Application Field | ||||||||||
| Coupling, wave filtering, resonant in high voltage circuits, switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC). | ||||||||||
| Testing Conditions | ||||||||||
| Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | |||||||||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | |||||||||
| Part Number Description Example: 1812 X7R 684 M 251 N T | ||||||||||
| 1. Dimension Code | 0201 (0.02*0.01 inch / 0.50*0.25 mm), 0402 (0.04*0.02 inch / 1.00*0.50 mm), 0603 (0.06*0.03 inch / 1.60*0.80 mm), 0805 (0.08*0.05 inch / 2.00*1.25 mm), 1206 (0.12*0.06 inch / 3.20*1.60 mm), 1210 (0.12*0.10 inch / 3.20*2.50 mm), 1808 (0.18*0.08 inch / 4.50*2.00 mm), 1812 (0.18*0.12 inch / 4.50*3.20 mm), 1825 (0.18*0.25 inch / 4.50*6.30 mm), 2211 (0.22*0.11 inch / 5.70*2.8 mm), 2225 (0.22*0.25 inch / 5.70*6.30 mm) | |||||||||
| 2. Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||||||||
| 3. Nominal Electrostatic Capacity | 8R0 (8.0 pF), 100 (10 pF), 101 (100 pF) | |||||||||
| 4. Tolerance of Electrostatic Capacity | B (0.1pF), C (0.25pF), D (0.5pF), F (1%), G (2%), J (5%), K (10%), M (20%), Z (+80%/-20%) | |||||||||
| 5. Rated Voltage (DC) | 250 (25V), 251 (250V), 252 (2500V) | |||||||||
| 6. Terminal Composition | Au/Ag-Ni-Sn (From the inside out) | |||||||||
| 7. Packing | T (Tape/Reel), P (Bag packing) | |||||||||
| Construction | ||||||||||
| 1 | Ceramic dielectric | |||||||||
| 2 | Inner electrode | |||||||||
| 3 | Outer electrode | |||||||||
| 4 | Nickle layer | |||||||||
| 5 | Tin layer | |||||||||
| Dimension (mm) | ||||||||||
| Part number | L (mm) | W (mm) | T (mm) | WB (mm) | ||||||
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 | ||||||
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 | ||||||
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 | ||||||
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 | ||||||
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 | ||||||
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 | ||||||
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 | ||||||
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 | ||||||
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 | ||||||
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 | ||||||
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 | ||||||
| Specification and Testing Method | ||||||||||
| Temperature | -55~+125 | |||||||||
| Visual/Dimension | 1. No Damage 2. Dimension meet Spec | |||||||||
| Static Capacity | NPO: 1000pF 1MHz10% 1.00.2Vrms; >1000pF 1KHz10% 1.00.2Vrms. X7R/X7T/X7P: 10uF 1KHz10% 1.00.2Vrms; >10uF 120Hz24 0.50.1Vrms. | |||||||||
| Dissipation Factor (DF) | NPO: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr). Cr1000pF, 1MHz10%, 1V0.2rms. Cr1000pF, 1KHz10%, 1V0.2rms. X7R/X7T/X7P: Cr10uF, 1KHz10%, 1V0.1rms. Cr10uF, 120Hz24Hz, 0.5V0.1rms. (See Note 1 for exceptions) | |||||||||
| IR Insulation Resistance | NPO: IR50000M, C10nF; IR*Cr500S, C10nF. X7R/X7T/X7P: IR10000M, C25nF; IR*Cr100S, C25nF. Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA. | |||||||||
| Hi-pot (DC) | Ur=100V: 2.5 x rated voltage; Ur=200V/250V: 2.0 x rated voltage; Ur=450/500/630V: 1.5 x rated voltage; 1KVUr2KV: 1.2 x rated voltage; 2KVUr: 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S. | |||||||||
| Solderability | Soldering area90%. Pre-heating: 80-120, 10-30s. Solder: Lead free. Flux. Soldering temperature: 2455. Solder time: 20.5s. | |||||||||
| Resistance to the heat of soldering | Visual-No damage, soldering area90%. Pre-heating: 100-200, 102s. Soldering temperature: 2655, 51s. Cleaning with solvent. Room temperature, time: 242 hours. | |||||||||
| Electrostatic capacity change rate | NPO: C/C0.5% or 0.5pF. X7R: C/C15%. X7T: -33% C/C22%. X7P: C/C10%. | |||||||||
| Flexural strength | No damage. Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Electro static capacity change rate: C/C10%. | |||||||||
| Terminal bonding strength | No visual damage. Applied Force: 5N. Duration: 101S. | |||||||||
| Thermal shock | NPO: C/C2.5% or 0.25pF. X7R/X7P: C/C0.5%. X7T: C/C10%. Run 5 cycles. Test after 242 hours normal temp & humidity. | |||||||||
| Temperature moisture exposure | Visual: No visual damage. Temperature: 402, Humidity: 90~95%RH, Time: 50024 hours. Capacitance change rate: NPO: C/C2% or 1pF. X7R/X7T/X7P: C/C10%. DF: 2 times initial standard. IR: NPO: IR2500M or IR*Cr25S. X7R/X7T/X7P: IR1000M or IR*Cr25S. | |||||||||
| High temperature exposure | Visual: No visual damage. Temperature: 1253, Time: 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Capacitance change rate: NPO: C/C2% or 1pF. X7R/X7T/X7P: C/C20%. DF: 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S. X7R/X7T/X7P: IR2000M or IR*Cr50S. | |||||||||
| PCB flexural strength | No crack and other defect. IR testing after soldering MLCC on PCB. | |||||||||
| Embossed Plastic Taping Dimensions (mm) | ||||||||||
| Code | Tape size A | B | C | D | E | F | G | H | J | T |
| 0805 | 1.55 0.20 | 2.35 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.50 Max |
| 1206 | 1.95 0.20 | 3.60 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.1 | 1.50 -0/+0.10 | 1.85 Max |
| 1210 | 2.70 0.10 | 3.42 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 3.2 Max |
| 1808 | 2.20 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 3.0 Max |
| 1812 | 3.66 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 8.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 4.0 Max |
| Paper Tape Reel Packing Dimensions (mm) | ||||||||||
| Code | Paper size W1 | L1 | D | C | B | P1 | P2 | P0 | d | t |
| 1005 | 0.240.02 | 0.450.02 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.30 Below |
| 0201 | 0.370.10 | 0.670.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0402 | 0.650.10 | 1.150.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0603 | 1.10 0.10 | 1.90 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 0805 | 1.45 0.15 | 2.30 0.15 | 8.0 0.15 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 1206 | 1.80 0.20 | 3.40 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| Reel Dimensions (unit: mm) | ||||||||||
| Unit | A | B | C | D | E | F | G | |||
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| Taping Specification | ||||||||||
| Top tape peeling strength | 0.1N < peeling strength < 0.7N. No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | |||||||||
| Packing Quantity | ||||||||||
| Size | Paper T/R (Pcs) | Plastic T/R (Pcs) | ||||||||
| 0603 | 4000 | - | ||||||||
| 0805 | 4000 | 3000 (T1.35mm) | ||||||||
| 1206 | - | 3000 (T>1.35mm), 2000 (T1.60mm) | ||||||||
| 1210 | - | 3000 (T>1.60mm), 2000 | ||||||||
| 1808 | - | 1000 (T1.85mm) | ||||||||
| 1812 | - | 1000 (T>1.85mm) | ||||||||
| 1812 and above | 800 | 500 | ||||||||
| Precautions For Use | ||||||||||
| Soldering Profile | Follow the temperature profile graph (refer to the graph in the enclosure page) to avoid cracks due to sudden temperature change. | |||||||||
| Manual Soldering | Handle soldering iron carefully to avoid thermal cracks. Pay attention to tip selection and temperature contact. | |||||||||
| Optimum Solder Amount for Reflow Soldering | Recommended soldering amounts are provided. | |||||||||
| Recommended Soldering Method | RReflow Soldering, WWave Soldering. Specific recommendations based on size, temperature characteristics, rated voltage, and capacitance. | |||||||||
| Soldering Temperature Profile | Keep the temperature difference between soldering temperature and surface temperature of chips as T150. | |||||||||
2509251626_AIDE-CAPACITOR-1206X7R102K500NT_C49326757.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
