<
>
Specifications
Voltage Rating:
50V
Capacitance:
47nF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0603X7R473K500NT
Model Number:
0603X7R473K500NT
Package:
0603
Key Attributes
Product Description
Product Overview
This product is a Multi-Layer Ceramic Capacitor (MLCC) designed for high-voltage applications. It is utilized for coupling, wave filtering, and resonant functions in various power supply and electronic circuits, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. The MLCCs are available in a range of sizes and temperature characteristics, offering reliable performance in demanding electrical environments.
Product Attributes
- Material: Ceramic dielectric, Inner electrode, Outer electrode (Au/Ag-Ni-Sn terminal composition)
- Certifications: RoHS compliant, REACH compliant
Technical Specifications
| Item | Description/Specification | Testing Method/Condition | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Application Field | ||||||||||
| Coupling, wave filtering, resonant in high voltage circuits | Switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps, etc. (Medium and High voltage MLCC) | |||||||||
| Testing Conditions | ||||||||||
| Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | (No special requirements) | ||||||||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | For data not matching testing specification | ||||||||
| Part Number Description Example: 1812 X7R 684 M 251 N T | ||||||||||
| 1. Dimension Code | 0201 (0.02*0.01 inch / 0.50*0.25 mm) to 2225 (0.22*0.25 inch / 5.70*6.30 mm) | See detailed dimensions in table below | ||||||||
| 2. Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||||||||
| 3. Nominal Electrostatic Capacity | 8R0 (8.0 pF) to 101 (100 pF) | |||||||||
| 4. Tolerance of Electrostatic Capacity | B: 0.1pF, C: 0.25pF, D: 0.5pF, F: 1%, G: 2%, J: 5%, K: 10%, M: 20%, Z: +80%/-20% | |||||||||
| 5. Rated Voltage (DC) | 250 (25V), 251 (250V), 252 (2500V) | |||||||||
| 6. Terminal Composition | Au/Ag-Ni-Sn (From the inside out) | |||||||||
| 7. Packing | T (Tape/Reel), P (Bag packing) | |||||||||
| Construction | ||||||||||
| Item | Description | |||||||||
| 1 | Ceramic dielectric | |||||||||
| 2 | Inner electrode | |||||||||
| 3 | Outer electrode | |||||||||
| 4 | Nickle layer | |||||||||
| 5 | Tin layer | |||||||||
| Dimensions (mm) | ||||||||||
| Part Number | L | W | T | WB | ||||||
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 | ||||||
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 | ||||||
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 | ||||||
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 | ||||||
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 | ||||||
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 | ||||||
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 | ||||||
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 | ||||||
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 | ||||||
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 | ||||||
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 | ||||||
| Specification and Testing Method | ||||||||||
| Temperature | -55~+125 | |||||||||
| Visual/Dimension | 1. No Damage, 2. Dimension meet Spec | Naked eye (Visual inspection), Digital calliper | ||||||||
| Static Capacity | Meet standard specification and tolerance | NPO: 1MHz10%, 1.00.2Vrms (1000pF); 1KHz10%, 1.00.2Vrms (>1000pF). X7R/X7T/X7P: 1KHz10%, 1.00.2Vrms (10uF); 120Hz24, 0.50.1Vrms (>10uF) | ||||||||
| Dissipation Factor (DF) | NPO: DF0.56 (Cr5pF); DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15% (50pFCr). X7R/X7T/X7P: See Note 1. | NPO: 1MHz10%, 1V0.2rms (Cr1000pF); 1KHz10%, 1V0.2rms (Cr1000pF). X7R/X7T/X7P: 1KHz10%, 1V0.1rms (Cr10uF); 120Hz24, 0.5V0.1rms (Cr10uF) | ||||||||
| IR Insulation Resistance | NPO: IR50000M (C10nF); IR*Cr500S (C10nF). X7R/X7T/X7P: IR10000M (C25nF); IR*Cr100S (C25nF) | Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA | ||||||||
| Hi-pot (DC) | No dielectric breakdown or damage | Ur=100V: 2.5 x rated voltage; Ur=200V/250V: 2.0 x rated voltage; Ur=450/500/630V: 1.5 x rated voltage; 1KVUr2KV: 1.2 x rated voltage; 2KVUr: 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S | ||||||||
| Solderability | Soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. | ||||||||
| Resistance to the heat of soldering | No visual damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. | ||||||||
| Electrostatic capacity change rate | NPO: C/C0.5% or 0.5pF; X7R: C/C15%; X7T: -33% C/C22%; X7P: C/C10% | Initial capacitance testing: Pre-heating 150 1hour, then place 48 hours under normal pressure & temperature. | ||||||||
| Flexural strength | No damage | Base board: Al2O3 /PCB. PCB dimension: Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. Test under flexural status. Electro static capacity change rate: C/C10% | ||||||||
| Terminal bonding strength | No visual damage | Applied Force: 5N, Duration: 101S | ||||||||
| Thermal shock | NPO: C/C2.5% or 0.25pF; X7R/X7P: C/C0.5%; X7T: C/C10% | Pre-condition (X7R h characteristic): Upper limit temperature 1hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test after place 242 hours normal temp & humidity. | ||||||||
| Temperature moisture exposure | Visual: No visual damage. Capacity change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C10%. DF: 2 times initial standard. IR: NPO: IR2500M or IR*Cr25S; X7R/X7T/X7P: IR1000M or IR*Cr25S. | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after place 242 hours normal temp & humidity. | ||||||||
| High temperature exposure | Visual: No visual damage. Capacity change rate: NPO: C/C2% or 1pF; X7R/X7T/X7P: C/C20%. DF: 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S; X7R/X7T/X7P: IR2000M or IR*Cr50S. | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after place 48 hours under normal pressure & temperature. | ||||||||
| PCB flexural strength | No crack and other defect | IR Soldering the MLCC on the PCB, then pressing direction based on the photo. | ||||||||
| Embossed Plastic Taping Dimensions (mm) | ||||||||||
| Code | Tape size A | B | C | D | E | F | G | H | J | T |
| 0805 | 1.55 0.20 | 2.35 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.50 Max |
| 1206 | 1.95 0.20 | 3.60 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.1 | 1.50 -0/+0.10 | 1.85 Max |
| 1210 | 2.70 0.10 | 3.42 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 3.2 Max |
| 1808 | 2.20 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 3.0 Max |
| 1812 | 3.66 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 8.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 4.0 Max |
| Paper Tape Reel Packing Dimensions (mm) | ||||||||||
| Code | Paper size W1 | L1 | D | C | B | P1 | P2 | P0 | d | t |
| 1005 | 0.24 0.02 | 0.45 0.02 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.30 Below |
| 0201 | 0.37 0.10 | 0.67 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0402 | 0.65 0.10 | 1.15 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 2.00 0.05 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 0.80 Below |
| Code | Paper size A | B | C | D | E | F | G | H | J | T |
| 0603 | 1.10 0.10 | 1.90 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 0805 | 1.45 0.15 | 2.30 0.15 | 8.0 0.15 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 1206 | 1.80 0.20 | 3.40 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| Reel Dimensions (unit: mm) | ||||||||||
| Type | A | B | C | D | E | F | G | |||
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| Taping Specification | ||||||||||
| Top tape peeling strength | 0.1N < peeling strength < 0.7N | No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | ||||||||
| Packing Quantity | ||||||||||
| Dimension | Paper T/R (Pcs) | Plastic T/R (Pcs) | ||||||||
| 0603 | 4000 | - | ||||||||
| 0805 | 4000 | 3000 (T1.35mm), 3000 (T1.35mm) | ||||||||
| 1206 | - | 2000 (T1.60mm), 3000 (T1.60mm) | ||||||||
| 1210 | - | 2000 | ||||||||
| 1808 | - | 1000 (T1.85mm) | ||||||||
| 1812 | - | 1000 (T1.85mm) | ||||||||
| 1812 | 800 | 500 | ||||||||
| Precautions For Use | ||||||||||
| Soldering Profile | To avoid crack problem by sudden temperature change, follow the temperature profile in the adjacent graph. | |||||||||
| Manual Soldering | Risk of thermal cracks. Handle soldering iron carefully, pay attention to tip selection and temperature contact. | |||||||||
| Optimum Solder Amount for Reflow Soldering | Recommended Soldering amounts. | |||||||||
| Recommended Soldering Method | ||||||||||
| Size | Temperature Characteristics | Soldering Method | ||||||||
| 1005 | NPO / X7R/X5R/X7S/X6S | R | ||||||||
| 0201 | NPO / X7R/X5R/X7S/X6S / Y5V | R | ||||||||
| 0402 | NPO / X7R/X5R/X7S/X6S / Y5V | R | ||||||||
| 0603 | NPO / X7R/X5R/X7S/X6S / Y5V | R/W (C1uf R, C1uf R/W for X7R/X5R/X7S/X6S & Y5V) | ||||||||
| 0805 | NPO / X7R/X5R/X7S/X6S / Y5V | R/W (C4.7uf R, C4.7uf R/W for X7R/X5R/X7S/X6S; C1uf R, C1uf R/W for Y5V) | ||||||||
| 1206 | NPO / X7R/X5R/X7S/X6S / Y5V | R/W (C10uf R, C10uf R/W for X7R/X5R/X7S/X6S & Y5V) | ||||||||
| 1210 | NPO / X7R/X5R/X7S/X6S / Y5V | R | ||||||||
| Soldering method: RReflow Soldering, WWave Soldering | ||||||||||
| Soldering Temperature Profile | ||||||||||
| While in preheating, keep the temperature difference between soldering temperature and surface temperature of chips as: T150. | ||||||||||
2509251626_AIDE-CAPACITOR-0603X7R473K500NT_C48579307.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
