86--15347289033
feliciazhou@pa.ecer.com
Online Service

Online Service

Contact Person
feliciazhou@pa.ecer.com
8615347289033
+86 136 6733 2386
quality Ceramic capacitor AIDE CAPACITOR 0603X7R103J500NT ideal for AC DC DC DC power chargers and networking communication devices factory
<
quality Ceramic capacitor AIDE CAPACITOR 0603X7R103J500NT ideal for AC DC DC DC power chargers and networking communication devices factory
>
Specifications
Voltage Rating:
50V
Capacitance:
10nF
Temperature Coefficient:
X7R
Tolerance:
±5%
Mfr. Part #:
0603X7R103J500NT
Model Number:
0603X7R103J500NT
Package:
0603
Key Attributes
Product Description

Product Overview

This product is a Multi-layer Ceramic Capacitor (MLCC) designed for high-voltage applications, including coupling, wave filtering, and resonant functions. It is suitable for use in switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamp ballasts. These MLCCs are available in medium and high voltage ratings.

Product Attributes

  • Terminal Composition: Au/Ag-Ni-Sn (from the inside out)
  • RoHS/REACH Compliance: Meets RoHS and REACH standards.

Technical Specifications

Part Number Description Example: 1812 X7R 684 M 251 N T

Item Description
1. Dimension Code
  • 0201 (0.02*0.01 inch / 0.50*0.25 mm)
  • 0402 (0.04*0.02 inch / 1.00*0.50 mm)
  • 0603 (0.06*0.03 inch / 1.60*0.80 mm)
  • 0805 (0.08*0.05 inch / 2.00*1.25 mm)
  • 1206 (0.12*0.06 inch / 3.20*1.60 mm)
  • 1210 (0.12*0.10 inch / 3.20*2.50 mm)
  • 1808 (0.18*0.08 inch / 4.50*2.00 mm)
  • 1812 (0.18*0.12 inch / 4.50*3.20 mm)
  • 1825 (0.18*0.25 inch / 4.50*6.30 mm)
  • 2211 (0.22*0.11 inch / 5.70*2.8 mm)
  • 2225 (0.22*0.25 inch / 5.70*6.30 mm)
2. Temperature Characteristic C0G (030 PPM/), X7R (15%), X5R (15%)
3. Nominal Electrostatic Capacity 8R0=8.0pF, 100=10pF, 101=100pF
4. Tolerance of Electrostatic Capacity B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20%
5. Rated Voltage (DC) 250=25V, 251=250V, 252=2500V
6. Terminal Composition Au/Ag-Ni-Sn (From the inside out)
7. Packing T: Tape/Reel, P: Bag packing (PE)

Construction

Item Description
1. Ceramic dielectric
2. Inner electrode
3. Outer electrode
4. Nickel layer
5. Tin layer

Dimensions (mm)

Part Number Dimension L Dimension W Dimension T WB
0201 (0603) 0.600.10 0.300.05 0.300.05 0.100.05
0402 (1005) 1.000.15 0.500.15 0.500.10 0.200.10
0603 (1608) 1.600.20 0.800.15 0.800.15 0.300.10
0805 (2012) 2.000.20 1.250.20 0.800.20 0.500.20
1206 (3216) 3.200.30 1.600.30 1.000.20 0.600.30
1210 (3225) 3.200.30 2.500.30 2.70 0.800.30
1808 (4520) 4.500.40 2.000.20 2.70 0.800.30
1812 (4532) 4.500.40 3.200.30 3.50 0.800.30
1825 (4563) 4.500.40 6.300.50 3.50 0.800.30
2220 (5750) 5.700.50 5.000.50 3.50 1.000.40
2225 (5763) 5.700.50 6.300.50 6.20 1.000.40

Specification and Testing Method

No. Item Specification/Requirement Testing Method
1 Temperature -55~+125
2 Visual/Dimension 1. No Damage 2. Dimension meet Spec Naked eye (Visual inspection), Digital caliper
3 Static Capacity Meet standard specification and tolerance
  • NPO characteristic: Capacity Frequency Voltage 1000pF 1MHz10% 1.00.2Vrms; 1000pF 1KHz10%
  • X7R/X7T/X7P characteristic: Capacity Frequency Voltage 10uF 1KHz10% 1.00.2Vrms; 10uF 120Hz24 0.50.1Vrms
4 Dissipation Factor (DF)
  • NPO Characteristic: DF0.56, Cr5pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr)
  • X7R/X7T/X7P characteristic: See Note 1
  • Cr1000pF, Testing frequency 110%MHz, Testing voltage 1V0.2rms
  • Cr1000pF, Testing frequency 110%KHz, Testing voltage 1V0.2rms.
  • Cr10uF, Test frequency 110%KHz, Voltage 1V0.1rms.
  • Cr10uF, Frequency 12024Hz, Voltage 0.5V0.1rms.
5 IR Insulation Resistance
  • NPO Characteristic: IR50000M, C10nF; IR*Cr500S, C10nF
  • X7R/X7T/X7P Characteristic: IR10000M, C25nF; IR*Cr100S, C25nF
 Testing condition: Rated voltage Time:605s Humidity:75% Temperature:255 Current :50mA
6 Hi-pot (DC) No dielectric breakdown or damage Ur=100V, 2.5 x rated voltage; Ur=200V/250V, 2.0 x rated voltage; Ur=450/500/630V, 1.5 x rated voltage; 1KVUr2KV, 1.2 x rated voltage; 2KVUr, 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time2S
7 Solderability soldering area90% Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s
8 Resistance to the heat of soldering Visual-No damage, soldering area90% Pre-heating temperature 100-200, time 102 s, soldering temperature :2655, Soldering time:51s. Cleaning with solvent. Room temperature, time :242 hours.
9 Flexural strength No damage Base boardAl2O3 /PCB. PCB dimension Thickness: 1.6mm Length: 100mm Width: 40mm Flexural depth: 1mm Bend speed: 0.5mm/sec. Unit: mm. Test it under the flexural status. Electro static capacity change rate C/C10%. Flexural deepth 452
10 Terminal bonding strength No visual damage Applied Force: 5N Duration: 101S
11 Thermal shock
  • NPO Characteristic: C/C2.5% or 0.25pF (larger reading)
  • X7R/X7P characteristic: C/C0.5%
  • X7T characteristic: C/C10%
 Pre-condition(X7R h characteristic):Upper limit temperature 1hour, place 241 hours, start to testing. Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity
12 Temperature moisture exposure
  • Visual No visual damage
  • Electrost atic capacitance change rate NPO characteristic: C/C2% or 1pF (larger reading); X7R/X7T/X7P characteristic: C/C10%
  • DF 2 times initial standard
  • IR NPO characteristic: IR2500M or IR*Cr25S (Lower reading); X7R/X7T/X7P: IR1000M or IR*Cr25S (Lower reading)
 Temperature 402 Humidity 90~95%RH time 500+24 hours. Test it after place 242 hours normal temp & humidity
13 High temperature exposure
  • Visual No visual damage
  • Electrost atic capacitance change rate NPO : C/C2% or 1pF (larger reading); X7R/X7T/X7P: C/C20%
  • DF 2 X initial standard
  • IR NPO : IR4000M or IR*Cr40S (Lower reading); X7R/X7T/X7P : IR2000M or IR*Cr50S (Lower reading)
 Charging and discharging current 50mA Max. Temperature 1253 Time 100048 hours Voltage 100VV250V 2x Rated voltage; 250VV1KV 1.5x rated voltage; 1KVV 1.2x rated voltage. Test it after place 48 hours under normal pressure & temperature.
14 PCB flexural strength No crack and other defect IR Soldering the MLCC on the PCB (Photo1), Then pressing direction base on the photo 2. SIZE A B C 0805(2012) 1.2 4 1.65; 1206(3216) 2.2 5 2; 1210(3225) 2.2 5 2.9; 1812(4532) 3.5 7 3.7; 2220(5750) 4.5 8 5.6

Embossed Plastic Taping Dimensions (mm)

Code Tape size A B C D E F G H J T
0805 1.55 0.20 2.35 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.50 Max
1206 1.95 0.20 3.60 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.1 1.50 -0/+0.10 1.85 Max
1210 2.70 0.10 3.42 0.10 8.00 0.10 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.05 4.00 0.10 1.55 -0/+0.10 3.2 Max
1808 2.20 0.10 4.95 0.10 12.00 0.10 5.50 0.05 1.75 0.10 4.00 0.10 2.00 0.05 4.00 0.10 1.50 -0/+0.10 3.0 Max
1812 3.66 0.10 4.95 0.10 12.00 0.10 5.50 0.05 1.75 0.10 8.00 0.10 2.00 0.05 4.00 0.10 1.55 -0/+0.10 4.0 Max

Paper Tape Reel Packing Dimensions (mm)

Code Paper size W1 L1 D C B P1 P2 P0 d t
1005 0.24 0.02 0.45 0.02 8.00 0.10 3.50 0.05 1.75 0.10 2.00 0.05 2.00 0.05 4.00 0.10 1.50 -0/+0.10 0.30 Below
0201 0.37 0.10 0.67 0.10 8.00 0.10 3.50 0.05 1.75 0.10 2.00 0.05 2.00 0.05 4.00 0.10 1.50 -0/+0.10 0.80 Below
0402 0.65 0.10 1.15 0.10 8.00 0.10 3.50 0.05 1.75 0.10 2.00 0.05 2.00 0.05 4.00 0.10 1.50 -0/+0.10 0.80 Below

Paper Tape Reel Packing Dimensions (mm)

Code Paper size A B C D E F G H J T
0603 1.10 0.10 1.90 0.10 8.00 0.10 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
0805 1.45 0.15 2.30 0.15 8.0 0.15 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max
1206 1.80 0.20 3.40 0.20 8.00 0.20 3.50 0.05 1.75 0.10 4.00 0.10 2.00 0.10 4.00 0.10 1.50 -0/+0.10 1.10 Max

Reel Dimensions (mm)

Type A B C D E F G
7REEL 1782.0 3.0 130.5 210.5 21 or Bigger 1010.5 12max
13REEL 3302.0 3.0 130.5 210.5 21 or Bigger 1010.5 12max

Packing Quantity

Dimension Paper T/R (Pcs) Plastic T/R (Pcs)
0603 4000
0805 4000 3000
1206 T1.35mm: 3000, T1.35mm: 2000
1210 T1.60mm: 3000, T1.60mm: 2000
1808 1000
1812 T1.85mm: 1000, T1.85mm: 800
1812 500

Precautions For Use

Multi-layer Ceramic Capacitors (MLCC) may fail in a short circuit or open circuit mode when subjected to severe electrical or mechanical stress beyond specified ratings. Following precautions for safety and application notes are recommended. If you have questions about handling precautions, please contact the engineering section or factory.


2509251626_AIDE-CAPACITOR-0603X7R103J500NT_C49326600.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max