<
>
Specifications
Voltage Rating:
16V
Capacitance:
10uF
Temperature Coefficient:
X6S
Tolerance:
±20%
Mfr. Part #:
0805X6S106M160NT
Model Number:
0805X6S106M160NT
Package:
0805
Key Attributes
Product Description
Product Overview
This series of 0805 (X6S) surface mount ceramic capacitors (MLCC) is designed for high-voltage electronic circuits, serving functions such as coupling, filtering, and resonance. They are suitable for applications including switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts.
Product Attributes
- Temperature Characteristic: X6S (22%)
- Termination Material: Copper/Silver-Nickel-Tin (inner to outer)
- Environmental Compliance: RoHS Directive, REACH Regulation (SVHC)
Technical Specifications
| Item | Specification | Test Method |
|---|---|---|
| Test Conditions | ||
| Standard State | Ambient Temperature: 15~35 Ambient Humidity: 45~75%RH Atmospheric Pressure: 86~106kPa | N/A |
| Standard Relative State | Ambient Temperature: 252 Ambient Humidity: 60~70%RH Atmospheric Pressure: 86~106kPa | N/A |
| Product Structure and Dimensions | ||
| Product Structure | 1. Ceramic Dielectric 2. Inner Electrode 3. Outer Electrode 4. Nickel Layer 5. Tin Layer | N/A |
| Product Dimensions (0805) | L: 2.000.20 mm W: 1.250.20 mm T: 0.800.20 mm WB: 1.000.20 mm | Inch: 0.08*0.05 |
| Specifications and Test Methods | ||
| 1. Operating Temperature Range | -55~+105 | N/A |
| 2. Appearance and Dimensions | 1. No visible damage 2. Dimensions meet specifications | Visual inspection; Caliper measurement |
| 3. Capacitance | Within specified tolerance | Frequency and voltage vary by characteristic (e.g., 1MHz10%, 1.00.2Vrms for NPO 1000pF; 1KHz10%, 1.00.2Vrms for X7R/X5R 10uF) |
| 4. Dissipation Factor (DF Value) | NPO: DF0.56% (Cr5 pF), DF1.5[(150/Cr)+7]10-4 (5pFCr50pF), DF0.15% (50pFCr) X7R/X5R/X6S/X7S/Y5V: See Note 1 | Frequency and voltage vary by capacitance (e.g., 110%MHz, 1V0.2rms for Cr1000pF NPO) |
| 5. Insulation Resistance | NPO: IR50000M, C10nF; IR*Cr500S, C10nF X7R/X6S/X5R: IR10000M, C25nF; IR*Cr100S, C25nF | Test voltage: 500V or rated voltage (if <500V); Duration: 605 sec; Humidity: 75%; Temp: 255; Current: 50mA |
| 6. Dielectric Strength (DC) | No dielectric breakdown or damage | 2.5x rated voltage (Ur=100V), 2.0x (Ur=200V/250V), 1.5x (Ur=450/500/630V), 1.2x (1KVUr2KV), 1.1x (Ur>2KV). Ramp time: 1-10s, Hold time: 2s. |
| 7. Solderability | >90% tinning rate; No visible damage | Preheat: 80-120 for 10-30s; Solder temp: 2455; Solder time: 20.5s |
| 8. Solder Heat Resistance | No visible damage, 90% tinning rate; Capacitance change rate: NPO 0.5% or 0.5pF, X7R 15%, X6S 22%; DF value: As per No. 4; IR: As per No. 5 | Preheat: 100-200 for 102s; Immersion temp: 2605; Immersion time: 51s. Rest for 242 hours at room temp. |
| 9. Bending Strength | No visible damage; Capacitance change rate: 10% | Test substrate: Al2O3 or PCB (1.6mm thick). Bending depth: 1mm. Press speed: 0.5mm/sec. Measurement in bent state. |
| 10. Terminal Bond Strength | No visible damage | N/A |
| 11. Temperature Cycling | Capacitance change rate: NPO 2.5% or 0.25pF, X7R/X5R 7.5%, X6S 10% | 5 cycles: Lower temp (303 min) -> Room temp (2-3 min) -> Upper temp (303 min) -> Room temp (2-3 min). Post-test at room temp/humidity for 242 hrs. |
| 12. Humidity Resistance | No visible damage; Capacitance change rate: NPO 2% or 1pF, X7R/X6S/X5R 10%; DF value: 2x initial standard; IR: NPO 2500M or IR*Cr25S, X7R/X6S/X5R 1000M or IR*Cr25S | Temp: 402; Humidity: 90~95%RH; Time: 50024 hours. Post-test at room temp/humidity for 24 hrs. |
| 13. High Temperature Load Test | No visible damage; Capacitance change rate: NPO 2% or 1pF, X7R/X6S/X5R 20%; DF value: 2x initial standard; IR: NPO 4000M or IR*Cr40S, X7R/X6S/X5R 2000M or IR*Cr50S | Temp: 853; Time: 100048 hours. Voltage: 2x rated voltage (100VV250V), 1.5x (250V |
| 14. PCB Bending Resistance | No cracks or defects | Capacitor soldered onto fixture (Fig. 1) and subjected to force (Fig. 2). Reflow soldering recommended. |
| Packaging Information | ||
| Packaging Type | T: Tape Reel Packaging, P: Bulk Packaging (PE Bag) | Optional |
| Tape Reel Packaging (Pcs) - 0805 | 3000 (T1.35mm), 2000 (T>1.35mm) | N/A |
2507091655_AIDE-CAPACITOR-0805X6S106M160NT_C49326694.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
