<
>
Specifications
Voltage Rating:
10V
Capacitance:
10uF
Temperature Coefficient:
X7R
Tolerance:
±10%
Mfr. Part #:
0603X7R106K100NT
Model Number:
0603X7R106K100NT
Package:
0603
Key Attributes
Product Description
Product Overview
These Multi-Layer Ceramic Capacitors (MLCCs) are designed for high-voltage applications, including coupling, wave filtering, and resonance in power supply circuits. They are suitable for use in switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight units, and energy-saving lamps. Available in various sizes and temperature characteristics (C0G, X7R, X5R), these MLCCs offer reliable performance and meet RoHS/REACH compliance.
Product Attributes
- Material: Ceramic dielectric, Inner electrode, Outer electrode
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- Compliance: RoHS, REACH
Technical Specifications
| Item | Description/Specification | Testing Method | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Application Field | ||||||||||
| Coupling, wave filtering, resonant in high voltage circuits, switch power supplier, AC-DC power charger, DC-DC power charger, networking/Communication interface, LCD backlight unit power supplier, amperite of energy saving lamps. (Medium and High voltage MLCC) | ||||||||||
| Testing Conditions | ||||||||||
| Normal Condition | Temperature: 15~35, Humidity: 45~75%RH, Atmosphere: 86~106kPa | |||||||||
| Relative Condition | Temperature: 252, Humidity: 60~70%RH, Atmosphere: 86~106kPa | |||||||||
| Part Number Description Example: 1812 X7R 684 M 251 N T | ||||||||||
| 1. Dimension Code | 0201 (0.02*0.01 inch / 0.50*0.25 mm), 0402 (0.04*0.02 inch / 1.00*0.50 mm), 0603 (0.06*0.03 inch / 1.60*0.80 mm), 0805 (0.08*0.05 inch / 2.00*1.25 mm), 1206 (0.12*0.06 inch / 3.20*1.60 mm), 1210 (0.12*0.10 inch / 3.20*2.50 mm), 1808 (0.18*0.08 inch / 4.50*2.00 mm), 1812 (0.18*0.12 inch / 4.50*3.20 mm), 1825 (0.18*0.25 inch / 4.50*6.30 mm), 2211 (0.22*0.11 inch / 5.70*2.8 mm), 2225 (0.22*0.25 inch / 5.70*6.30 mm) | |||||||||
| 2. Temperature Characteristic | C0G (030 PPM/), X7R (15%), X5R (15%) | |||||||||
| 3. Nominal Electrostatic Capacity | 8R0=8.0pF, 100=10pF, 101=100pF | |||||||||
| 4. Tolerance of Electrostatic Capacity | B:0.1pF, C:0.25pF, D:0.5pF, F:1%, G: 2%, J:5%, K:10%, M:20%, Z:+80%/-20% | |||||||||
| 5. Rated Voltage (DC) | 250=25V, 251=250V, 252=2500V | |||||||||
| 6. Terminal Composition | Au/Ag-Ni-Sn (From the inside out) | |||||||||
| 7. Packing | T: Tape/Reel, P: Bag packing (PE) | |||||||||
| Construction | ||||||||||
| 1 | Ceramic dielectric | |||||||||
| 2 | Inner electrode | |||||||||
| 3 | Outer electrode | |||||||||
| 4 | Nickle layer | |||||||||
| 5 | Tin layer | |||||||||
| Dimension (mm) | ||||||||||
| Part Number | L | W | T | WB | ||||||
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 | ||||||
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 | ||||||
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 | ||||||
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 | ||||||
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 | ||||||
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 | ||||||
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 | ||||||
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 | ||||||
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 | ||||||
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 | ||||||
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 | ||||||
| Specification and Testing Method | ||||||||||
| Temperature | -55~+125 | Naked eye (Visual inspection), Digital calliper | ||||||||
| Visual/Dimension | 1. No Damage, 2. Dimension meet Spec | Naked eye (Visual inspection), Digital calliper | ||||||||
| Static Capacity | NPO: 1000pF @ 1MHz10%, 1.00.2Vrms; >1000pF @ 1KHz10%, 1.00.2Vrms. X7R/X7T/X7P: 10uF @ 1KHz10%, 1.00.2Vrms; >10uF @ 120Hz24, 0.50.1Vrms | |||||||||
| Dissipation Factor (DF) | NPO: DF0.56, Cr5 pF; DF1.5[(150/Cr)+7]10-4 (5pFCr50pF); DF0.15%, (50pFCr). Cr1000pF, 1MHz10%, 1V0.2rms. Cr1000pF, 1KHz10%, 1V0.2rms. X7R/X7T/X7P: See Note 1. Cr10uF, 1KHz10%, 1V0.1rms. Cr10uF, 120Hz24Hz, 0.5V0.1rms. | |||||||||
| IR Insulation Resistance | NPO: IR50000M, C10nF; IR*Cr500S, C10nF. X7R/X7T/X7P: IR10000M, C25nF; IR*Cr100S, C25nF. Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA | |||||||||
| Hi-pot (DC) | Ur=100V, 2.5 x rated voltage; Ur=200V/250V, 2.0 x rated voltage; Ur=450/500/630V, 1.5 x rated voltage; 1KVUr2KV, 1.2 x rated voltage; 2KVUr, 1.1 x rated voltage. Voltage Raising time: 110S, Voltage maintaining time: 2S | |||||||||
| Solderability | soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux. Soldering temperature 2455, Solder time 20.5s. | ||||||||
| Resistance to the heat of soldering | Visual-No damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature :2655, Soldering time:51s. Cleaning with solvent. Room temperature, time :242 hours. | ||||||||
| Electrostatic capacity change rate | NPO: C/C0.5% or 0.5pF (larger reading). X7R: C/C15%. X7T: -33% C/C22%. X7P: C/C10%. | Pre-heating 150 1 hour, then place 48 hours under normal pressure & temperature. | ||||||||
| Flexural strength | Electro static capacity change rate C/C10% | Base boardAl2O3 /PCB. PCB dimension Thickness: 1.6mm, Length: 100mm, Width: 40mm. Flexural depth: 1mm. Bend speed: 0.5mm/sec. | ||||||||
| Terminal bonding strength | No visual damage | Applied Force: 5N, Duration: 101S | ||||||||
| Thermal shock | NPO: C/C2.5% or 0.25pF (larger reading). X7R/X7P: C/C0.5%. X7T: C/C10%. | Pre-condition (X7R h characteristic): Upper limit temperature 1 hour, place 241 hours, start testing. Run 5 cycles Thermal shock. Test after place 242 hours normal temp & humidity. | ||||||||
| Temperature moisture exposure | Visual: No visual damage. Electrostatic capacitance change rate: NPO: C/C2% or 1pF (larger reading). X7R/X7T/X7P: C/C10%. DF 2 times initial standard. IR: NPO: IR2500M or IR*Cr25S (Lower reading). X7R/X7T/X7P: IR1000M or IR*Cr25S (Lower reading). | Temperature 402, Humidity 90~95%RH, time 50024 hours. Test after place 242 hours normal temp & humidity. | ||||||||
| High temperature exposure | Visual: No visual damage. Electrostatic capacitance change rate: NPO: C/C2% or 1pF (larger reading). X7R/X7T/X7P: C/C20%. DF 2 X initial standard. IR: NPO: IR4000M or IR*Cr40S (Lower reading). X7R/X7T/X7P: IR2000M or IR*Cr50S (Lower reading). | Temperature 1253, Time 100048 hours. Voltage: 100VV250V (2x Rated voltage), 250VV1KV (1.5x rated voltage), 1KVV (1.2x rated voltage). Test after place 48 hours under normal pressure & temperature. | ||||||||
| PCB flexural strength | No crack and other defect. | Soldering the MLCC on the PCB. Pressing direction based on photo. | ||||||||
| Embossed Plastic Taping Dimensions (mm) | ||||||||||
| Code | Tape size A | B | C | D | E | F | G | H | J | T |
| 0805 | 1.55 0.20 | 2.35 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.50 Max |
| 1206 | 1.95 0.20 | 3.60 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.1 | 1.50 -0/+0.10 | 1.85 Max |
| 1210 | 2.70 0.10 | 3.42 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 3.2 Max |
| 1808 | 2.20 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.50 -0/+0.10 | 3.0 Max |
| 1812 | 3.66 0.10 | 4.95 0.10 | 12.00 0.10 | 5.50 0.05 | 1.75 0.10 | 8.00 0.10 | 2.00 0.05 | 4.00 0.10 | 1.55 -0/+0.10 | 4.0 Max |
| Paper Tape Reel Packing Dimensions (mm) | ||||||||||
| Code | Paper size W1 | L1 | D | C | B | P1 | P2 | P0 | d | t |
| 1005 | 0.240.02 | 0.450.02 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.30 Below |
| 0201 | 0.370.10 | 0.670.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0402 | 0.650.10 | 1.150.10 | 8.000.10 | 3.500.05 | 1.750.10 | 2.000.05 | 2.000.05 | 4.000.10 | 1.50 -0/+0.10 | 0.80 Below |
| 0603 | 1.10 0.10 | 1.90 0.10 | 8.00 0.10 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 0805 | 1.45 0.15 | 2.30 0.15 | 8.0 0.15 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| 1206 | 1.80 0.20 | 3.40 0.20 | 8.00 0.20 | 3.50 0.05 | 1.75 0.10 | 4.00 0.10 | 2.00 0.10 | 4.00 0.10 | 1.50 -0/+0.10 | 1.10 Max |
| Reel Dimensions (unit: mm) | ||||||||||
| Type | A | B | C | D | E | F | G | |||
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 | 12max | |||
| Taping Specification | ||||||||||
| Top tape peeling strength | 0.1N < peeling strength < 0.7N | No paper dirty remains on the scotch when peeling, and sticks to top and bottom tape. | ||||||||
| Packing Quantity | ||||||||||
| Size | Paper T/R (Pcs) | Plastic T/R (Pcs) | ||||||||
| 0603 | 4000 | - | ||||||||
| 0805 | 4000 | 3000 (T1.35mm) | ||||||||
| 1206 | - | 3000 (T1.60mm), 2000 (T>1.60mm) | ||||||||
| 1210 | - | 3000 (T1.85mm), 1000 (T>1.85mm) | ||||||||
| 1808 | - | 800 | ||||||||
| 1812 | - | 500 | ||||||||
| Precautions For Use | ||||||||||
| Soldering Profile | Avoid crack problem by sudden temperature change. Follow the temperature profile in the adjacent graph (refer to the graph in the enclosure page). | |||||||||
| Manual Soldering | Risk of thermal cracks. Handle soldering iron carefully, pay attention to tip selection and temperature contact. | |||||||||
| Optimum Solder Amount for Reflow Soldering | Recommended | |||||||||
| Recommended Soldering Method | Size, Temperature Characteristics, Rated Voltage, Capacitance, Soldering Method (RReflow Soldering, WWave Soldering). | |||||||||
| Temperature profile for soldering | Keep temperature difference between soldering temperature and surface temperature of chips as T150. | |||||||||
2509251626_AIDE-CAPACITOR-0603X7R106K100NT_C49326609.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
