<
>
Specifications
Voltage Rating:
50V
Capacitance:
10uF
Temperature Coefficient:
X5R
Tolerance:
±10%
Mfr. Part #:
0805X5R106K500NT
Model Number:
0805X5R106K500NT
Package:
0805
Key Attributes
Product Description
Product Overview
This product is a Medium and High Voltage Multilayer Ceramic Capacitor (MLCC) designed for applications in coupling, wave filtering, and resonance within high voltage circuits. It is suitable for a wide range of power supply and networking applications, including switch power supplies, AC-DC and DC-DC power chargers, networking/communication interfaces, LCD backlight unit power supplies, and energy-saving lamps. The MLCCs are available in various standard sizes and temperature characteristics, offering reliable performance across different operating conditions.
Product Attributes
- Temperature Characteristics: C0G (030 PPM/), X7R (15%), X5R (15%)
- Terminal Composition: Au/Ag-Ni-Sn (From the inside out)
- Packing Options: Tape/Reel (T), Bag packing (P)
- Compliance: RoHS/REACH compliant
Technical Specifications
Part Number Description Breakdown
| Item | Description |
|---|---|
| 1 | Dimension Code |
| 2 | Temperature characteristic (C0G, X7R, X5R) |
| 3 | Nominal electrostatic capacity (pF) |
| 4 | Tolerance of electrostatic capacity (B, C, D, F, G, J, K, M, Z) |
| 5 | Rated voltage (DC) (V) |
| 6 | Terminal composition |
| 7 | Packing |
Dimension Codes and Sizes
| Dimension Code | L*W (inch) | L*W (mm) |
|---|---|---|
| 0201 | 0.02*0.01 | 0.50*0.25 |
| 0402 | 0.04*0.02 | 1.00*0.50 |
| 0603 | 0.06*0.03 | 1.60*0.80 |
| 0805 | 0.08*0.05 | 2.00*1.25 |
| 1206 | 0.12*0.06 | 3.20*1.60 |
| 1210 | 0.12*0.10 | 3.20*2.50 |
| 1808 | 0.18*0.08 | 4.50*2.00 |
| 1812 | 0.18*0.12 | 4.50*3.20 |
| 1825 | 0.18*0.25 | 4.50*6.30 |
| 2211 | 0.22*0.11 | 5.70*2.8 |
| 2225 | 0.22*0.25 | 5.70*6.30 |
Construction
| Item | Description |
|---|---|
| 1 | Ceramic dielectric |
| 2 | Inner electrode |
| 3 | Outer electrode |
| 4 | Nickel layer |
| 5 | Tin layer |
Dimensions (mm)
| Part number | Dimension (mm) L | Dimension (mm) W | Dimension (mm) T | Dimension (mm) WB |
|---|---|---|---|---|
| 0201 (0603) | 0.600.10 | 0.300.05 | 0.300.05 | 0.100.05 |
| 0402 (1005) | 1.000.15 | 0.500.15 | 0.500.10 | 0.200.10 |
| 0603 (1608) | 1.600.20 | 0.800.15 | 0.800.15 | 0.300.10 |
| 0805 (2012) | 2.000.20 | 1.250.20 | 0.800.20 | 0.500.20 |
| 1206 (3216) | 3.200.30 | 1.600.30 | 1.000.20 | 0.600.30 |
| 1210 (3225) | 3.200.30 | 2.500.30 | 2.70 | 0.800.30 |
| 1808 (4520) | 4.500.40 | 2.000.20 | 2.70 | 0.800.30 |
| 1812 (4532) | 4.500.40 | 3.200.30 | 3.50 | 0.800.30 |
| 1825 (4563) | 4.500.40 | 6.300.50 | 3.50 | 0.800.30 |
| 2220 (5750) | 5.700.50 | 5.000.50 | 3.50 | 1.000.40 |
| 2225 (5763) | 5.700.50 | 6.300.50 | 6.20 | 1.000.40 |
Specification and Testing Method
| No | Item | Specification/Requirement | Testing method |
|---|---|---|---|
| 1 | Temperature | -55~+125 | |
| 2 | Visual/ Dimension | 1,No Damage 2,Dimension meet Spec | Naked eye (Visual inspection) Digital calliper |
| 3 | Static capacity | Meet standard specification and tolerance | NPO characteristic: 1000pF: 1MHz10%, 1.00.2Vrms 1000 pF: 1KHz10%, 1.00.2Vrms X7R/X7T/X7P characteristic: 10uF: 1KHz10%, 1.00.2Vrms 10uF: 120Hz24, 0.50.1Vrms |
| 4 | Dissipation factor (DF) | NPO Characteristic: DF0.56, Cr5 pF DF1.5[(150/Cr)+7]10-4 (5pFCr50pF) DF0.15%, (50pFCr) Cr1000pF, Testing frequency 110%MHz, Testing voltage 1V0.2rms Cr1000pF, Testing frequency 110%KHz, Testing voltage 1V0.2rms. X7R/X7T/X7P characteristic: see Note 1 Cr10uF, Test frequency 110%KHz,Voltage 1V0.1rms. Cr10uF, Frequency 12024Hz, Voltage 0.5V0.1rms | |
| 5 | IR Insulation Resistance | NPO Characteristic: IR50000M, C10nF IR*Cr500S, C10nF Testing condition: Rated voltage, Time: 605s, Humidity: 75%, Temperature: 255, Current: 50mA X7R/X7T/X7P Characteristic: IR10000M, C25nF IR*Cr100S, C25nF | |
| 6 | Hi-pot (DC) | Ur=100V, 2.5 x rated voltage Ur=200V/250V, 2.0 x rated voltage Ur=450/500/630V, 1.5 x rated voltage 1KVUr2KV, 1.2 x rated voltage 2KVUr, 1.1 x rated voltage Voltage Raising time: 110S, Voltage maintaining time: 2S | No dielectric breakdown or damage |
| 7 | Solderability | soldering area90% | Pre-heating temperature 80-120, time 10-30s, lead free solder, flux Soldering temperature 2455 Solder time 20.5s |
| 8 | Resistance to the heat of soldering | Visual-No damage, soldering area90% | Pre-heating temperature 100-200, time 102 s, soldering temperature: 2655, Soldering time: 51s. Cleaning with solvent. Room temperature, time: 242 hours. |
| 9 | Flexural strength | No damage | Base boardAl2O3 /PCB PCB dimension Thickness: 1.6mm, Length: 100mm, Width: 40mm Flexural depth: 1mm Bend speed: 0.5mm/sec. Test it under the flexural status Electro static capacity change rate C/C10% Flexural deepth 452 |
| 10 | Terminal bonding strength | No visual damage | Applied Force: 5N Duration: 101S |
| 11 | Thermal shock | NPO Characteristic: C/C2.5% or 0.25pF (larger reading) X7R/X7P- characteristic: C/C0.5% X7T characteristic: C/C10% | Pre-condition(X7R h characteristic):Upper limit temperature 1hour, place 241 hours, start to testing. Run 5 cycles Thermal shock. Test it after place 242 hours normal temp & humidity |
| 12 | Temperature moisture exposure | Visual: No visual damage Electrostatic capacitance change rate: NPO characteristic: C/C2% or 1pF (larger reading) X7R/X7T/X7P characteristic: C/C10% DF 2 times initial standard IR: NPO characteristic: IR2500M or IR*Cr25S (Lower reading) X7R/X7T/X7P: IR1000M or IR*Cr25S (Lower reading) | Temperature 402, Humidity 90~95%RH, time 500+24 hours. Test it after place 242 hours normal temp & humidity |
| 13 | High temperature exposure | Visual: No visual damage Electrostatic capacitance change rate: NPO: C/C2% or 1pF (larger reading) X7R/X7T/X7P: C/C20% DF 2 X initial standard IR: NPO: IR4000M or IR*Cr40S (Lower reading) X7R/X7T/X7P: IR2000M or IR*Cr50S (Lower reading) | Charging and discharging current 50mA Max. Temperature 1253, Time 100048 hours Voltage 100VV250V: 2x Rated voltage 250VV1KV: 1.5x rated voltage 1KVV: 1.2x rated voltage Test it after place 48 hours under normal pressure & temperature |
| 14 | PCB flexural strength | No crack and other defect | Soldering the MLCC on the PCB (Photo1), Then pressing direction base on the photo 2. SIZE | A | B | C 0805(2012) | 1.2 | 4 | 1.65 1206(3216) | 2.2 | 5 | 2 1210(3225) | 2.2 | 5 | 2.9 1812(4532) | 3.5 | 7 | 3.7 2220(5750) | 4.5 | 8 | 5.6 |
Embossed Plastic Taping Dimensions (mm)
| Code | Tape size A 0.20 | Tape size B 0.20 | Tape size C 0.20 | Tape size D 0.05 | Tape size E 0.10 | Tape size F 0.10 | Tape size G 0.10 | Tape size H 0.10 | Tape size J -0/+0.10 | Tape size T Max |
|---|---|---|---|---|---|---|---|---|---|---|
| 0805 | 1.55 | 2.35 | 8.00 | 3.50 | 1.75 | 4.00 | 2.00 | 4.00 | 1.50 | 1.50 |
| 1206 | 1.95 | 3.60 | 8.00 | 3.50 | 1.75 | 4.00 | 2.00 | 4.00 | 1.50 | 1.85 |
| 1210 | 2.70 | 3.42 | 8.00 | 3.50 | 1.75 | 4.00 | 2.00 | 4.00 | 1.55 | 3.2 |
| 1808 | 2.20 | 4.95 | 12.00 | 5.50 | 1.75 | 4.00 | 2.00 | 4.00 | 1.50 | 3.0 |
| 1812 | 3.66 | 4.95 | 12.00 | 5.50 | 1.75 | 8.00 | 2.00 | 4.00 | 1.55 | 4.0 |
Paper Tape Reel Packing Dimensions (mm)
| Code | Paper size W1 0.02 | Paper size L1 0.02 | Paper size D 0.10 | Paper size C 0.05 | Paper size B 0.10 | Paper size P1 0.05 | Paper size P2 0.05 | Paper size P0 0.10 | Paper size d 0.10 | Paper size t Below |
|---|---|---|---|---|---|---|---|---|---|---|
| 1005 | 0.24 | 0.45 | 8.00 | 3.50 | 1.75 | 2.00 | 2.00 | 4.00 | 1.50 | 0.30 |
| 0201 | 0.37 | 0.67 | 8.00 | 3.50 | 1.75 | 2.00 | 2.00 | 4.00 | 1.50 | 0.80 |
| 0402 | 0.65 | 1.15 | 8.00 | 3.50 | 1.75 | 2.00 | 2.00 | 4.00 | 1.50 | 0.80 |
Paper Tape Reel Packing Dimensions (mm) - Continued
| Code | Paper size A 0.10 | Paper size B 0.10 | Paper size C 0.10 | Paper size D 0.05 | Paper size E 0.10 | Paper size F 0.10 | Paper size G 0.10 | Paper size H 0.10 | Paper size J -0/+0.10 | Paper size T Max |
|---|---|---|---|---|---|---|---|---|---|---|
| 0603 | 1.10 | 1.90 | 8.00 | 3.50 | 1.75 | 4.00 | 2.00 | 4.00 | 1.50 | 1.10 |
| 0805 | 1.45 | 2.30 | 8.0 | 3.50 | 1.75 | 4.00 | 2.00 | 4.00 | 1.50 | 1.10 |
| 1206 | 1.80 | 3.40 | 8.00 | 3.50 | 1.75 | 4.00 | 2.00 | 4.00 | 1.50 | 1.10 |
Reel Dimensions (mm)
| Reel Type | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| 7REEL | 1782.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 1010.5 |
| 13REEL | 3302.0 | 3.0 | 130.5 | 210.5 | 21 or Bigger | 12max |
Packing Quantity
| Size | Paper T/R (Pcs) | Plastic T/R (Pcs) |
|---|---|---|
| 0603 | 4000 | |
| 0805 | 4000 | 3000 (T1.35mm) |
| 1206 | 3000 (T>1.35mm) | |
| 1210 | 2000 (T1.60mm) | |
| 1808 | 3000 (T>1.60mm) | |
| 1812 | 2000 | |
| 1812 | 1000 (T1.85mm) | |
| 800 (T>1.85mm) | ||
| 500 |
Recommended Soldering Method
| Size | Temperature Characteristics | Rated Voltage | Capacitance | Soldering Method |
|---|---|---|---|---|
| 1005 | NPO | / | / | R |
| X7R/X5R/X7S/X6S | / | / | R | |
| 0201 | NPO | / | / | R |
| X7R/X5R/X7S/X6S | / | / | R | |
| Y5V | / | / | R | |
| 0402 | NPO | / | / | R |
| X7R/X5R/X7S/X6S | / | / | R | |
| Y5V | / | / | R | |
| 0603 | NPO | / | / | R/W |
| X7R/X5R/X7S/X6S | / | C1uf | R | |
| C1uf | R/W | |||
| Y5V | / | C1uf | R | |
| C1uf | R/W | |||
| 0805 | NPO | / | / | R/W |
| X7R/X5R/X7S/X6S | / | C4.7uf | R | |
| C4.7uf | R/W | |||
| Y5V | / | C1uf | R | |
| C1uf | R/W | |||
| 1206 | NPO | / | / | R/W |
| X7R/X5R/X7S/X6S | / | C10uf | R | |
| C10uf | R/W | |||
| Y5V | / | C10uf | R | |
| C10uf | R/W | |||
| 1210 | NPO | / | / | R |
| X7R/X5R/X7S/X6S | / | / | R | |
| Y5V | / | / | R |
2509251626_AIDE-CAPACITOR-0805X5R106K500NT_C48579582.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
